FASS Motor Update Campaing....starts today!

[Diesel-Dan]

We have been talking about a motor update program for the units that still have the serviceable brush motor. This program would allow....

FASS SN#: xxxx - 4930

HPFP (150 GPH) SN#: xxx - 912

HPFP (95 GPH) SN#: xxxx - 1017

.....and older (lower numerically) to be eligible for an update to the new EM-1001 motor (and updated T-block for the FASS) at a reduced price. We are going to offer this upgrade for $175.00 for the FASS and $195.00 for the HPFP (New/Better billet hanging bracket needed for HPFP install).

(I e-mailed our dealers with this letter...they will have the info....if they dont, have your dealer call me. Please do not call us with quesitons (We are very short handed on the phones due to staff changes)....you will be referred to a dealer in your area that can help you. PM me if needed.)

We will require a $175 Core for the FASS and $155.00 core for the HPFP. (This brings both units to $350.00 total). All cores will be refunded when the older motors, motor bases (and T-block for FASS) arrive at DPP for inspection. All cores are subject to verification. Only serviceable motors will be accepted in this campaign. DO NOT JUST SEND IN YOUR CORE! IT WILL BE REFUSED IF IT DOES NOT HAVE AN DEALER ISSUED RMA#. ALSO a SN# will be needed.

We will also be offering a 4 year warranty covering these new motors. New warranty paperwork will be sent out with each motor replacement. The customer will need to fill this out and return it to us along with a purchase receipt. This new 4 year warranty will cover the motor ONLY. The customer will have 30 days from date of purchase to send in the registration card with a copy of the sales receipt.

Part numbers to use when contacting your dealer:

RP-1001 (FASS 95 GPH) $175.00 Core

RP-1002 (FASS 150 GPH) $175.00 Core

RP-1001-HPFP (95 GPH HPFP) $155.00 Core (New SN# will be issued)

RP-1002-HPFP (150 GPH HPFP) $155.00 Core (New SN# will be issued)


This is our way of saying thank you for sticking with FASS through the years!

__________________
Dan MacDonald
Diesel Performance Products
Head of Wnty/Trouble Shooting

Please don't PM me. I have a Vendor section just for CF users to post questions. I would like to keep everything public as it might help others with similar issues. Thanks for your understanding.

---

Last edited by Diesel-Dan : 12-20-2006 at 03:15 PM.

[PULN PWR]

Diesel Dan, I just received, or had ordered a 150/150 fass system from a local dealer. He told me something about a 6 year warranty. What does that include? Is this pump that we just ordered in up to date? I would have assumed that it came from you direct? My truck is an 04 with a dealer installed tank re locate. I think we narrowed it down to a 2004 on engine harness, but with the tank pickup that the 05-06 etc.


Cheers and soon to be a FASSman!

Many thanks!

Chad

---

Last edited by PULN PWR : 01-24-2007 at 07:35 PM.

[Diesel-Dan]

Originally Posted by PULN PWR

Diesel Dan, I just received, or had ordered a 150/150 fass system from a local dealer. He told me something about a 6 year warranty. What does that include? Is this pump that we just ordered in up to date? I would have assumed that it came from you direct? My truck is an 04 with a dealer installed tank re locate. I think we narrowed it down to a 2004 on engine harness, but with the tank pickup that the 05-06 etc.


Cheers and soon to be a FASSman!

Many thanks!

Chad

UM.....you should have the updated motor, yes. They have been in service for more than a year now. BUT with your intank pump, you will need a suction tube kit or reinstall a stock sending unit. You FASS can not pull through your intank pump.

The unit comes with a one year wnty. It has paperwork included that needs to be filled out and send in with a copy of your invoice from your FASS dealer. This will extend your wnty 5 years.

__________________
Dan MacDonald
Diesel Performance Products
Head of Wnty/Trouble Shooting

Please don't PM me. I have a Vendor section just for CF users to post questions. I would like to keep everything public as it might help others with similar issues. Thanks for your understanding.

[PULN PWR]

I know about the suction tube thingy. As for the warranty.....SAWEEEET! Good deal!

Chad

[ben]

Dan,

Is this update still available?

Thanks

__________________
01.5 QC ETH/DEE 4x4
DDP 4's, Smarty, Super B, Fass II/Vulcan, Hol'd Scotty II, Con ofe, 5" exhaust, Autometer Boost, Pyro, FP, and Trans 404/872

[Diesel-Dan]

Yup....still going on.....

__________________
Dan MacDonald
Diesel Performance Products
Head of Wnty/Trouble Shooting

Please don't PM me. I have a Vendor section just for CF users to post questions. I would like to keep everything public as it might help others with similar issues. Thanks for your understanding.