Removing sap off my windows

[cih335]

I bought a truck and the guy i bought it off of was deployed for a year and the truck sat under a tree (dont no what kind of tree) now there is sap all over it, i got it all off the body by buffing but dont no how to get it off the windows. any suggestions, thanks

__________________
97 Dodge CUMMINS, 12Valve, Auto, 4in to 5in exhaust, 370 Injectors, BHAF, Mod. AFC, Removed Plate, Leveling Kit and 33's

[BILLS06]

Clay bar does a good job.

__________________
06 QCSB Capped Rail Airaid Baffle Delete MagHytec Transmission Pan Aeroturbine Muffler Fluidampr Superchips Pyro/Boost & Autometer Ultra Lite Digital Oil Pressure & Transmission Temp Gauges ATS 5 Star TC Flexpiped CAT DDR Enabled Royal Purpled EZ Down Weston Nerf Bars Spray In Bed Liner Valley Gooseneck Hitch
http://www.myspace.com/montanadodge

[mikemopar2003]

Try using a razor blade, I use a razor blade scraper, Just be very carefull hold @ 45 degree angle. I have removed just about every thing off of windows with a razor just be carefull not to scratch the window or cut your self.

__________________
2001 Dodge Ram 3500 H.O cummins, NV5600, Edge comp box, 5in summit racing exhaust, BHAF, Autometer phantom boost and pyro, BD low fuel press light, vulcan 1/2" fuel line kit, 4601HP fuel pump, Inline fuel water separater, 150hp diesel dynamics jammer v injectors.

[tader]

I had a similiar question and received several responces to the thread. Pine Sap

Hope this helps....

But the razor blade should do the trick.

__________________
BIG Toy: 2002 2500 SLT QC SB 4X4 FBD 5" Strait Pipe Exhaust w/ Diverter Pipe and a 7" Single Miter Cut Stack, BHAF, Edge Juice w/ Attitude, FASS 150, Leveling kit, 4:10s, TOYO 315's

Little Toy: 1996 BMW Z3 1.9 5spd - 12000k HIDS, Angel Eyes and More Mods to come...

[slvrbullet01]

yep razor blade will do it

__________________
NEW...2007 5.9L laramie 4door short bed, 4x4, 5 inch MBRP turbo back exhaust, AFE stage II intake dry filter, Autometer Phantom II's Pyro, Boost, and Trans, leveling kit. Line X Bedliner. Smarty jr, 18x9 XD series wheels with nitto terra grappler tires.

[Bob Ragen]

I've used DW-40 to remove sap in the past from clothes, hands tools, etc.. You have to let it soak in for a while. try not to get it on your paint. It will soak into the paint and if you repaint it wil orange peel and/or fisheye. Then you'll have to wash the windows thoughly.

__________________
2008 Dodge Ram 3500 QC, SRW, 4X4, 6Spd Auto, Black Met. Pearl, Bed Line-x
Expanding my Carbon Foot Print one oily gallon at a time

[e-rok]

as been stated, a razor blade. I even use it to remove sap from paint. as long as you keep it lubricated and the proper angle it wont harm paint either. but for glass you dont have anything to worry about except maybe be a little careful on the windsheild.

__________________
1995 3500 DRW Ext. Cab 2wd

[Walter Buller]

Before using the single edge razor blade, and while you're using it, spray the area with a mild detergent solution in a spray bottle. This lubricates the cutting edge so it slides along the glass easier and slices through the sap easier, plus it prevents sap buildup on the cutting edge so you don't inadvertently spread the sap around, necessitating further clean up effort.

[antwan718]

With the razorblade, the best advice I have for you is to hold the blade with a pair of Vice Grips, Ice cut myself on the back of the blade before scraping the tint off my mustang.

__________________
-03' 5.9L w/Edge Mileage Max, 4" TBE, GHD, Modular Intake, Boost elbow
-85" Mustang GT CFI
-70" 440+6 Challenger R/T

[kupecda]

Rubbing alcohol works great for removing tree sap.

__________________
2008 Ram 3500 SLT QuadCab LB SRW 4x4 6.7L G56 Light Khaki
DiPricol Optix(Pyro/Boost/Diff Temp), S&B CAI, Line-X, B&W Turnover Ball, ProTech, PacBrake Air Springs, HBS 2" leveling kit, MagHytec Rear, Willmore Wheel-to-Wheels, High Idle enabled, JakeBrake EB switch, 276hp 510ft-lb

[carolinarednek]

If you had access to a pressure washer that could heat the water, that works as well. I have had success with mine when I used to detail cars and trucks.

__________________
South Carolina Chapter Co-President http://www.cumminsforum.com/forum/south-carolina/
1996 Dually 4x4, auto with BD valve body and torque-lok, banks twin ram, no plate, BHAF, Cummins exhaust brake
280.03 RWHP/682.93 TORQUE on David Dunbar's Dyno

[KBCummins5.9]

baby oil works pretty good

__________________
2004 ram 3500 laramie, 4% tint, 6" superlift, 37/14in tires, Superlifts TruSpeed, 3500w amp twin 1800w subs, Banks six-gun & speed loader, Banks High-Ram intake, Banks Ram-air intake system, FASS fuel system, Aero exhaust, Exhaust break, Turbo silencer MIA.