pullin hitches

[jonboyftfd]

im gonna do my first truck pull wit my truck wha kind of hitch do i need to be able to fit the hook and if i need to get one where can i find them thanks

__________________
2004.5 2500 cummins HO diablo power puck, AFE torque tube, K&N filter, triple guage pod, leveling kit, straight exhaust

[BBRam]

Moved to the Cummins Pulling forum for better exposure.

__________________
03-3500, DRW, QC, 4x4, DTT Trans, Mag-Hytec, R700 BD Twins, BD IC Boots, BD Billet Flexplate, Lockup Switch, SMARTY TNT-R BETA/TS MP-8, Eliminator Fuel System, Floor It Stage 3 CP3 & Rail Cap, BIG Stix's by FTE, ARP Head Stud's, Springs, Fluidampr, ATS ARC-FLOW, AFE, Boost, Drive Pressure, Pyro, Fuel Pressure, Tran's Temp, Rail Pressure Gauge, GDP Ladder Bars, GrandRock 7" Miters. Old #'s (R/T .021, 60' 1.76, 1/4 ET 13.14 @ 100.45 mph)

[Hot Stuff]

Pulling Hitch Homemade

Here's nice one with plenty of adjustment for different heights. Different places run different heights.

__________________
'03 Black 2500 QC/LB 4x4, 6 speed, BHAF, black H2's, 35" BFG MT's, B&W turnover, Juice w/ Attitude, 5" str8 pipe, BD lift pump, spin on filters, traction bars


Adam---Proud member of the OHIO COAL ROLLERS

[TBittner]

Would a ball pintle combo reciever work?

__________________
2006 2500 4x4 6-speed, Smarty,TST, Jake Brake, 5" Turbo Back Magnaflow,Cool Blue Tube w/ Ice Box Intake, Rhino Liner, BFG TKO 285/70/17, Isspro (Pyro, Boost, Fuel), SB DD 360012cb, CFM+, Arson II CP3, BMK-11, Quad RP Guage

[CTD03]

looks like i dont have to post a pic up thanks hot stuff

o i changed the color of the hitch its black and white

__________________
03 5 speed sponsors
http://www.valairinc.com/
http://hamiltoncams.com/

[DevilDogDiesel]

What size material did you use?

__________________
2000 2500 ext. cab short bed, AFE cold air intake, single 6 inch stack, high tech turbo, FASS 95, Scheid injectors, Adrenaline, HP intercooler boots, fully built trans., custom trac. bars, HAISLEY MACHINE ALL THE WAY!!

[Hot Stuff]

Looks like CTD03 made it out off 2x2 square bar stock, with some gusseting on the top and bottom. Poke a few holes in it for the clevis, and you're set!

__________________
'03 Black 2500 QC/LB 4x4, 6 speed, BHAF, black H2's, 35" BFG MT's, B&W turnover, Juice w/ Attitude, 5" str8 pipe, BD lift pump, spin on filters, traction bars


Adam---Proud member of the OHIO COAL ROLLERS

[DevilDogDiesel]

For some reason I dont think you just "poke" holes thru 2x2 bar stock, but gotcha.

__________________
2000 2500 ext. cab short bed, AFE cold air intake, single 6 inch stack, high tech turbo, FASS 95, Scheid injectors, Adrenaline, HP intercooler boots, fully built trans., custom trac. bars, HAISLEY MACHINE ALL THE WAY!!

[Hot Stuff]

I do. But I work in a machine shop with BIG tools. Sorry. I'm just use to our tooling! We've got a lathe big enough to turn a crankshaft that's 20' long with a 3' throw with a weight of over 100,000lbs!

__________________
'03 Black 2500 QC/LB 4x4, 6 speed, BHAF, black H2's, 35" BFG MT's, B&W turnover, Juice w/ Attitude, 5" str8 pipe, BD lift pump, spin on filters, traction bars


Adam---Proud member of the OHIO COAL ROLLERS

---

Last edited by Hot Stuff : 07-23-2008 at 06:51 PM.

[DevilDogDiesel]

It would be really nice to have tools like that at my dispose, but unfortunatly I have to use a hillbilly drill press, meaning my arm and a vsr drill. :

__________________
2000 2500 ext. cab short bed, AFE cold air intake, single 6 inch stack, high tech turbo, FASS 95, Scheid injectors, Adrenaline, HP intercooler boots, fully built trans., custom trac. bars, HAISLEY MACHINE ALL THE WAY!!

[04cumminsram]

if you guys set your truck up to pull make the hitch for the height where you pull, pretty much everywhere ive ever pulled its been 26in from ground to hooking point.. with 33" tires on my 3500 with the springs clamped and 500 pounds hanging up front mine is 2.2 solid with a piece of 2x3 on top the a 3.5id ring that is 1" thick... ill take pics and post them tomorrow night !

btw this is with the back tire air psi at 30 and the front at 26

__________________
04 305/555: some shiny stuff, black smoke and a lotta noise

PA events: http://www.cumminsforum.com/forum/pennsylvania/

---

Last edited by 04cumminsram : 07-23-2008 at 09:05 PM. Reason: forgot

[CTD03]

Originally Posted by DevilDogDiesel

What size material did you use?

2x2 and 3x2 and 2 massive clevis.

and yes just punch holes like that are easy i had my machine shop do that at work for me

heck i almost had the thing burned out as one piece got to love CADD

__________________
03 5 speed sponsors
http://www.valairinc.com/
http://hamiltoncams.com/