pullin hitches - Page 2

puffthemagicgoat · 08-19-2008, 05:19 PM

make sure you reinforce it and gusset hitch very very well i have bent alot of different setups

__________________
2005 4dr 2500 4x4 II Super Phat Shaft 66 ,120's, Scarry Larry stack with Edge Juice with Attitude,Built Tranny, BD flywheel, BD lift pump,4'' exhaust,2nd gen intake, II modded cp3, Airaid intake, traction bars, weight rack, zex nitrous,17x12 pacers 33'' truxus

FST_DSL · 09-02-2008, 04:24 AM

Man nice work!!

farmboy3510 · 09-03-2008, 06:14 AM

I've got one that I just machined and used this past weekend and worked very good I'll get the pic's up today.

__________________
2001, 3500, 3:55 gears, 6sp, FASS, H11 studs, O-Ringed, Edge W/ Attitude Hot, DDP 110 Injectors, k&n, 4in exhaust, South Bend DDC, BFG KO's, Silverline turn down

getblown5.9 · 09-03-2008, 08:21 AM

this one seems to work well for me.

__________________
2002 Dodge Ram 2500
QCLB, 4x4, 3.54LS, 6spd HO CTD
Mostly stock with a couple things like stacks, 33's, and a big black bumper!

***DevilDogDiesel*** · 09-03-2008, 09:11 AM

That doesnt look like it would fly here. Your opening looks too small. Here the opening has to be 3" x 3.75". If its big enough it looks good though.

__________________
2000 2500 ext. cab short bed, AFE cold air intake, single 6 inch stack, high tech turbo, FASS 95, Scheid injectors, Adrenaline, HP intercooler boots, fully built trans., custom trac. bars, HAISLEY MACHINE ALL THE WAY!!

***nick03*** · 09-03-2008, 09:51 AM

You have to check with the rules of the pulling club that is running the pulling event. They are all different! And most of the time guys are nice enough to let you brough a hitch for your first pull!

__________________
07 Dodge 3500 6.7 6spd Manual, Inferno Red, ProComps Extreme AT 305-65-17, AFE intake w/ torque tube. MP-8 & Edge Juice W/ Attitude! Valair New12.25" 3400# Dual Disk Ceramic/Ceramic on stock Hydro's, 10 months old w/28,500+miles. A big thank you to John at Holland Court Diesel & Dan at Valair

!

09-03-2008, 09:51 AM	#18 (permalink)
*nick03* Diesel Head Join Date: Mar 2008 Location: Lakewood,CO Posts: 1,039 nick03's Truck Pics	You have to check with the rules of the pulling club that is running the pulling event. They are all different! And most of the time guys are nice enough to let you brough a hitch for your first pull! __________________ 07 Dodge 3500 6.7 6spd Manual, Inferno Red, ProComps Extreme AT 305-65-17, AFE intake w/ torque tube. MP-8 & Edge Juice W/ Attitude! Valair New12.25" 3400# Dual Disk Ceramic/Ceramic on stock Hydro's, 10 months old w/28,500+miles. A big thank you to John at Holland Court Diesel & Dan at Valair!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

08-19-2008, 05:19 PM	#13 (permalink)
puffthemagicgoat Cummins Fanatic Join Date: Feb 2008 Location: Hertford N.C. Posts: 140 puffthemagicgoat's Truck Pics	make sure you reinforce it and gusset hitch very very well i have bent alot of different setups __________________ 2005 4dr 2500 4x4 II Super Phat Shaft 66 ,120's, Scarry Larry stack with Edge Juice with Attitude,Built Tranny, BD flywheel, BD lift pump,4'' exhaust,2nd gen intake, II modded cp3, Airaid intake, traction bars, weight rack, zex nitrous,17x12 pacers 33'' truxus

Remove Advertisements Sponsored Links
Dodge Cummins Diesel Forum Advertisement

09-02-2008, 04:24 AM	#14 (permalink)
FST_DSL Cummins Fan Join Date: Aug 2008 Location: Del Rio, TX Posts: 57 FST_DSL's Truck Pics	Man nice work!!

09-03-2008, 06:14 AM	#15 (permalink)
farmboy3510 Newbie Join Date: Aug 2008 Posts: 16 farmboy3510's Truck Pics	I've got one that I just machined and used this past weekend and worked very good I'll get the pic's up today. __________________ 2001, 3500, 3:55 gears, 6sp, FASS, H11 studs, O-Ringed, Edge W/ Attitude Hot, DDP 110 Injectors, k&n, 4in exhaust, South Bend DDC, BFG KO's, Silverline turn down

09-03-2008, 08:21 AM	#16 (permalink)
getblown5.9 Diesel Freak Join Date: Dec 2005 Location: Baltimore, md Posts: 542 getblown5.9's Truck Pics	this one seems to work well for me. __________________ 2002 Dodge Ram 2500 QCLB, 4x4, 3.54LS, 6spd HO CTD Mostly stock with a couple things like stacks, 33's, and a big black bumper!

09-03-2008, 09:11 AM	#17 (permalink)
*DevilDogDiesel* Cummins CrAzY Join Date: Apr 2008 Location: Marion, Indiana Posts: 706 DevilDogDiesel's Truck Pics	That doesnt look like it would fly here. Your opening looks too small. Here the opening has to be 3" x 3.75". If its big enough it looks good though. __________________ 2000 2500 ext. cab short bed, AFE cold air intake, single 6 inch stack, high tech turbo, FASS 95, Scheid injectors, Adrenaline, HP intercooler boots, fully built trans., custom trac. bars, HAISLEY MACHINE ALL THE WAY!!