cummins rat rod project - Page 2

1lowdiesel · 11-05-2008, 04:01 PM

that would look pretty sweet to have the IH logo on there. i know where there is an old ford grille that i'd be able to scoop up for nothing, but i like the tractor idea.

__________________
1950 international L110 2wd 92 cummins 12v

Build Thread: http://www.cumminsforum.com/forum/cu...d-project.html

Broke Down · 11-05-2008, 04:13 PM

it was something like this

__________________
DUKE<-- 2000 4x4 3/4 ton ex cab lwb ATS converter,suncoast heavyduty rebuild kit,ATS valve body, edge EZ, straight piped, 3rd gen cromeclads, isspro pyro boost fuel, FASS , coaltrain 150's

1lowdiesel · 11-05-2008, 04:30 PM

hmmm, now you got me thinking. i know of a junk yard around here that has a ton of old stuff like that.

__________________
1950 international L110 2wd 92 cummins 12v

Build Thread: http://www.cumminsforum.com/forum/cu...d-project.html

ChaseTruck754 · 11-07-2008, 08:49 PM

people have been using tractor grills on lots of rat rods lately. Some look cool and some REALLY don't

__________________
My cummins swap - 1974 Ford Crew cab http://www.cumminsforum.com/forum/cu...-crew-cab.html

Blue01Cummins · 11-07-2008, 08:52 PM

that is awsome cant wait to see it when it is done !!!

__________________
2001 Dodge Ram 2500, 6 speed, Gauges pyro and boost, Holley Blue, K&N, 4" downpipe to a single 5" stack, Edge comp, and a little juice for fun.

http://www.myspace.com/trperformance

1lowdiesel · 11-10-2008, 11:09 AM

well didn't get much done his weekend, started making more room by cutting up the chevy chassis i had laying around. i did manage to get my new bottom charger though, my buddy said it's not big enough but i think it'll work for me, the exhaust housing is huge and the wastegate is regd for 20psi, which should be enough for me.

__________________
1950 international L110 2wd 92 cummins 12v

Build Thread: http://www.cumminsforum.com/forum/cu...d-project.html

1lowdiesel · 11-16-2008, 11:38 PM

managed to work on the truck a bit this weekend, i did an egr delete on the dmax first though cause she needed it. if you have a truck w/ an egr system, do your truck a favor and take it out. look what it does to the intake manifold.

ok now for the truck. and i found a deal on CompD for some head studs too, $200 bucks.:thumbsup

__________________
1950 international L110 2wd 92 cummins 12v

Build Thread: http://www.cumminsforum.com/forum/cu...d-project.html

1lowdiesel · 12-15-2008, 01:10 PM

got a little done this weekend, didn't have my camera so phone pics it is. finally got the whole truck broken down and ready to start on the new frame. even had a little time to get the bed on the dmax.

__________________
1950 international L110 2wd 92 cummins 12v

Build Thread: http://www.cumminsforum.com/forum/cu...d-project.html

Broke Down · 12-15-2008, 01:18 PM

you going to run no top or are you going to keep it?

__________________
DUKE<-- 2000 4x4 3/4 ton ex cab lwb ATS converter,suncoast heavyduty rebuild kit,ATS valve body, edge EZ, straight piped, 3rd gen cromeclads, isspro pyro boost fuel, FASS , coaltrain 150's

1lowdiesel · 12-15-2008, 01:33 PM

what do ya mean top?

__________________
1950 international L110 2wd 92 cummins 12v

Build Thread: http://www.cumminsforum.com/forum/cu...d-project.html

**Diesel_Nuts** · 12-15-2008, 01:43 PM

Cool project, and I hope it turns out the way you want!!

__________________
07 2500 Ostrich QC (E B P) 4x4, 5.9L, HTS, 8" Rize on 37s, Amsoil w/ BMK-11, Gauges, SMARTY, AEM B.F., BD Manifold, 5" MBRP, CFM+, FTE Rail Cap, WICKED CP3, Airdog, Mag Hytec's....Hard Parts Waiting to go in!!!!

1lowdiesel · 12-17-2008, 10:22 AM

here are some better pics, i'm going to the steel yard this weekend so i can start on the frame.

anyone know what this rear is or could be?

__________________
1950 international L110 2wd 92 cummins 12v

Build Thread: http://www.cumminsforum.com/forum/cu...d-project.html

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

11-05-2008, 04:01 PM	#13 (permalink)
1lowdiesel Cummins Fanatic Join Date: Oct 2008 Location: carteret Posts: 101 Thanks: 0 Thanked 0 Times in 0 Posts 1lowdiesel's Truck Pics	that would look pretty sweet to have the IH logo on there. i know where there is an old ford grille that i'd be able to scoop up for nothing, but i like the tractor idea. __________________ 1950 international L110 2wd 92 cummins 12v Build Thread: http://www.cumminsforum.com/forum/cu...d-project.html

Remove Advertisements Sponsored Links
Dodge Cummins Diesel Forum Advertisement

11-05-2008, 04:13 PM	#14 (permalink)
Broke Down Super Moderator Join Date: May 2008 Location: Pineville,LA Posts: 5,562 Thanks: 53 Thanked 70 Times in 56 Posts Broke Down's Truck Pics	it was something like this __________________ DUKE<-- 2000 4x4 3/4 ton ex cab lwb ATS converter,suncoast heavyduty rebuild kit,ATS valve body, edge EZ, straight piped, 3rd gen cromeclads, isspro pyro boost fuel, FASS , coaltrain 150's

11-05-2008, 04:30 PM	#15 (permalink)
1lowdiesel Cummins Fanatic Join Date: Oct 2008 Location: carteret Posts: 101 Thanks: 0 Thanked 0 Times in 0 Posts 1lowdiesel's Truck Pics	hmmm, now you got me thinking. i know of a junk yard around here that has a ton of old stuff like that. __________________ 1950 international L110 2wd 92 cummins 12v Build Thread: http://www.cumminsforum.com/forum/cu...d-project.html

11-07-2008, 08:49 PM	#16 (permalink)
ChaseTruck754 Diesel Freak Join Date: Aug 2007 Location: Costa Mesa, CA Posts: 847 Thanks: 0 Thanked 9 Times in 9 Posts ChaseTruck754's Truck Pics	people have been using tractor grills on lots of rat rods lately. Some look cool and some REALLY don't __________________ My cummins swap - 1974 Ford Crew cab http://www.cumminsforum.com/forum/cu...-crew-cab.html

11-07-2008, 08:52 PM	#17 (permalink)
Blue01Cummins Cummins Nut Join Date: Feb 2008 Posts: 381 Thanks: 0 Thanked 0 Times in 0 Posts Blue01Cummins's Truck Pics	that is awsome cant wait to see it when it is done !!! __________________ 2001 Dodge Ram 2500, 6 speed, Gauges pyro and boost, Holley Blue, K&N, 4" downpipe to a single 5" stack, Edge comp, and a little juice for fun. http://www.myspace.com/trperformance

11-10-2008, 11:09 AM	#18 (permalink)
1lowdiesel Cummins Fanatic Join Date: Oct 2008 Location: carteret Posts: 101 Thanks: 0 Thanked 0 Times in 0 Posts 1lowdiesel's Truck Pics	well didn't get much done his weekend, started making more room by cutting up the chevy chassis i had laying around. i did manage to get my new bottom charger though, my buddy said it's not big enough but i think it'll work for me, the exhaust housing is huge and the wastegate is regd for 20psi, which should be enough for me. __________________ 1950 international L110 2wd 92 cummins 12v Build Thread: http://www.cumminsforum.com/forum/cu...d-project.html

11-16-2008, 11:38 PM	#19 (permalink)
1lowdiesel Cummins Fanatic Join Date: Oct 2008 Location: carteret Posts: 101 Thanks: 0 Thanked 0 Times in 0 Posts 1lowdiesel's Truck Pics	managed to work on the truck a bit this weekend, i did an egr delete on the dmax first though cause she needed it. if you have a truck w/ an egr system, do your truck a favor and take it out. look what it does to the intake manifold. ok now for the truck. and i found a deal on CompD for some head studs too, $200 bucks.:thumbsup __________________ 1950 international L110 2wd 92 cummins 12v Build Thread: http://www.cumminsforum.com/forum/cu...d-project.html

12-15-2008, 01:10 PM	#20 (permalink)
1lowdiesel Cummins Fanatic Join Date: Oct 2008 Location: carteret Posts: 101 Thanks: 0 Thanked 0 Times in 0 Posts 1lowdiesel's Truck Pics	got a little done this weekend, didn't have my camera so phone pics it is. finally got the whole truck broken down and ready to start on the new frame. even had a little time to get the bed on the dmax. __________________ 1950 international L110 2wd 92 cummins 12v Build Thread: http://www.cumminsforum.com/forum/cu...d-project.html

12-15-2008, 01:18 PM	#21 (permalink)
Broke Down Super Moderator Join Date: May 2008 Location: Pineville,LA Posts: 5,562 Thanks: 53 Thanked 70 Times in 56 Posts Broke Down's Truck Pics	you going to run no top or are you going to keep it? __________________ DUKE<-- 2000 4x4 3/4 ton ex cab lwb ATS converter,suncoast heavyduty rebuild kit,ATS valve body, edge EZ, straight piped, 3rd gen cromeclads, isspro pyro boost fuel, FASS , coaltrain 150's

12-15-2008, 01:33 PM	#22 (permalink)
1lowdiesel Cummins Fanatic Join Date: Oct 2008 Location: carteret Posts: 101 Thanks: 0 Thanked 0 Times in 0 Posts 1lowdiesel's Truck Pics	what do ya mean top? __________________ 1950 international L110 2wd 92 cummins 12v Build Thread: http://www.cumminsforum.com/forum/cu...d-project.html

12-15-2008, 01:43 PM	#23 (permalink)
Diesel_Nuts TEXAS EAST VP Join Date: Oct 2007 Location: Spring Tx. Posts: 3,030 Thanks: 73 Thanked 22 Times in 19 Posts Diesel_Nuts's Truck Pics	Cool project, and I hope it turns out the way you want!! __________________ 07 2500 Ostrich QC (E B P) 4x4, 5.9L, HTS, 8" Rize on 37s, Amsoil w/ BMK-11, Gauges, SMARTY, AEM B.F., BD Manifold, 5" MBRP, CFM+, FTE Rail Cap, WICKED CP3, Airdog, Mag Hytec's....Hard Parts Waiting to go in!!!!

12-17-2008, 10:22 AM	#24 (permalink)
1lowdiesel Cummins Fanatic Join Date: Oct 2008 Location: carteret Posts: 101 Thanks: 0 Thanked 0 Times in 0 Posts 1lowdiesel's Truck Pics	here are some better pics, i'm going to the steel yard this weekend so i can start on the frame. anyone know what this rear is or could be? __________________ 1950 international L110 2wd 92 cummins 12v Build Thread: http://www.cumminsforum.com/forum/cu...d-project.html