79 Crewcab F-350 conversion

[ChaseTruck754]

Nice to see you over here Dave. Is that red truck the one you went to look at yesterday - or one you bought a while back?

__________________
My cummins swap - 1974 Ford Crew cab http://www.cumminsforum.com/forum/cu...-crew-cab.html

[crazyredneckanyhow]

I bought it awhile back. I looked at two the other day but neither had a 60f so i didnt bother.

[crazyredneckanyhow]

Ok so i made a booboo. I scrapped the dodge without asking if i needed to keep anything else. Does anyone know how to hook up the heater grid? The guy at the Cummins dealer told me i needed solinoids off the firewall but all that went bye byes.

[ChaseTruck754]

you danged red neck. So quick to haul everything to the scrapper...

__________________
My cummins swap - 1974 Ford Crew cab http://www.cumminsforum.com/forum/cu...-crew-cab.html

[FOverRebuiltDodge]

Yeah, you'll need the solinoids. And if you scrapped them already, well then you could always go to eBay!

__________________
78 Ford F250, 24 valve from a 2001, NV4500, NP241dhd, 6” lift, 35” tires, holley blue pump, homemade fuel filter setup(think fass or airdog), apps inside cab. You can buy what they think you want or you can make it yourself. F.O.R.D. build and truck Pics

[plumb crazy ford]

you can use a ford solinoid instaed of the two. I have mine on a switch so I can heat when I want.

__________________
79 F-350 sc.flat bed,dana 60 front dana 80 ltd.slip rear.95 cummins/5spd and transfer case.custom ground #10 plate.

[ChaseTruck754]

got a part # or anything on that solenoid?

__________________
My cummins swap - 1974 Ford Crew cab http://www.cumminsforum.com/forum/cu...-crew-cab.html

[1800joedaddy]

Originally Posted by plumb crazy ford

you can use a ford solinoid instaed of the two. I have mine on a switch so I can heat when I want.

You just made my day! I kept my ford solenoid hooked-up hoping I could use it instead.

Get busy redneck, we're ALL going going to have to get together when these get road-trip worthy! Call it a Crew Cab Cummins Quiters ralley!

__________________
95' DRW Cummins auto - 96' PSD - 79' F-350 Cummins Crewcab shortbed dually And Oh Yah, Ohio State SUCKS!!! My build http://www.cumminsforum.com/forum/cu...ins-build.html

[JWH_03_Dodge]

looking good man... this thing is turning out great so far!!

__________________
John - 03 QC/LB 4x4 5sp
Visit the Hoosier Truck Club
FTE Diesel FASS giveaway Click here!!!

Originally Posted by Broke Down

come on Steve....my nuts hurt and i am stuck on the couch

[plumb crazy ford]

Originally Posted by ChaseTruck754

got a part # or anything on that solenoid?

no part #, there all pretty much the same, will try to get a pic later.

__________________
79 F-350 sc.flat bed,dana 60 front dana 80 ltd.slip rear.95 cummins/5spd and transfer case.custom ground #10 plate.

[plumb crazy ford]

Originally Posted by 1800joedaddy

You just made my day! I kept my ford solenoid hooked-up hoping I could use it instead.

Get busy redneck, we're ALL going going to have to get together when these get road-trip worthy! Call it a Crew Cab Cummins Quiters ralley!

i use my originl solinoid to send power to the cummins starter. i use one for my heater grid and one more to isolate my second battery.

__________________
79 F-350 sc.flat bed,dana 60 front dana 80 ltd.slip rear.95 cummins/5spd and transfer case.custom ground #10 plate.

[4wydnr]

Originally Posted by 1800joedaddy

You just made my day! I kept my ford solenoid hooked-up hoping I could use it instead.

Get busy redneck, we're ALL going going to have to get together when these get road-trip worthy! Call it a Crew Cab Cummins Quiters ralley!

Is this for crewcab guys only? What about us regular cab dent side guys?

__________________
2001 F-250 7.3 with some add ons
1977 F-250 12v conversion in progress