California diese smog requirments!!!! EVERYONE SHOULD READ THIS!!!

[redmonster_2005]

the govt should fear the people not the people fearing the govt.

__________________
04.5 QCSB 6spd afe intake, smarty, optix boost, pyrro and rp gauges, straight piped to 8" stack grid heater delete

[Chevy-Eater]

Ok lets assume that this smog crap happens. For all of you running programmers cant you just take them off? Also would a smog tech even be able to tell the difference between a stock turbo and a performance one? (The only snag here is for those that are running twins.) And for the smoke, theres gotta be a way to make a trap in our exhaust that looks like a muffler/ cat.

__________________
94 regular cab 4x4, no plate, 90hp sticks, 191's, 2095 rack plug, 20* timing , Modded AFC, 5000gsk, Goerend Trans, Lockup switch, WH1C/HT60 Twins 34mm internal gate

[SmokinTheHippies]

Originally Posted by Chevy-Eater

Ok lets assume that this smog crap happens. For all of you running programmers cant you just take them off? Also would a smog tech even be able to tell the difference between a stock turbo and a performance one? (The only snag here is for those that are running twins.) And for the smoke, theres gotta be a way to make a trap in our exhaust that looks like a muffler/ cat.

woudlnt twins be a good thing cuz it will help with the smoke?? i hate this crap!!!

also, i was thinking bout buying a used cat, cutting it in half and hollowing it, putting it over the exhaust up near where it should be, then welding it to the exhuast, the welds will make it look like it actually is being used, but it wont actually be doing anything, basically like gutting your cat, only doing it over the existing piping...

__________________
2002 2500 HO 6 spd 4x4 -433HP- Feb '09 ROTM. Gone to new home!
Thanks Holland Court Diesel!
In search of my next Pig.

http://www.youtube.com/watch?v=axAEF...=youtube_gdata
...."your half a maaaaannn!"

[redmonster_2005]

Originally Posted by Chevy-Eater

Ok lets assume that this smog crap happens. For all of you running programmers cant you just take them off? Also would a smog tech even be able to tell the difference between a stock turbo and a performance one? (The only snag here is for those that are running twins.) And for the smoke, theres gotta be a way to make a trap in our exhaust that looks like a muffler/ cat.

heres the issue the bpu guys are easy to take care of. when you start doing injectors and inj pumps or turbos it gets harder to conceal that your modded. also with the smoke test being subjective like it is one tech may pass you another may fail the same truck for the same smoke.

__________________
04.5 QCSB 6spd afe intake, smarty, optix boost, pyrro and rp gauges, straight piped to 8" stack grid heater delete

[dezl]

Im glad everyone is finally starting to take this stuff serious, I am going to form a petition, if you are interested please let me know!!! Send me a PM with your name and I will put it all together! I am going to post this other forums as well.

It may be a total waste of time but I sure would like to at least give it a chance!

And everyone again, please call and raise hell. The least we can do is make this guys life miserable, considering thats what hes gonna do to all of us!

__________________
08 Chevy LMM 6" lift 20" monsters w/35's, other than that all stock.

69 Chevelle, BB 427, Ported and polished heads, Custom cam, 10.5/1 compression, Forged TRW pistons, 1.7 Roller rockers, Holley 750 double pumper, Stage 2 TH 400, 12 bolt rear end

[slagburn]

Originally Posted by Chevy-Eater

theres gotta be a way to make a trap in our exhaust that looks like a muffler/ cat.

It's called a DPF.... mine might be for rent now.

__________________
07.5, 6.7, Auto, QC, 4x4, Lots of gauges - ISSPRO (Pyro, Boost, Trans Temp) PriCol Optix (Fuel Pressure Lift/Rail) AutoMeter (Oil Pressure) - Dynatrac Free-Spin Hub Conversion Kit - RETRAX bed cover - homebrew stealth shaved bluetec badge - plugged up EGR - Baldwin BF1212 water separator and CAT 1R0750 fuel filter - MSD Dashhawk - Baldwin B164 Bypass Filter - BD SBS - TS MP8
When a strong man armed keepeth his palace, his goods are in peace - Luke 11:21

[dezl]

Possibly a G2G, for the actual signing of the petition?

__________________
08 Chevy LMM 6" lift 20" monsters w/35's, other than that all stock.

69 Chevelle, BB 427, Ported and polished heads, Custom cam, 10.5/1 compression, Forged TRW pistons, 1.7 Roller rockers, Holley 750 double pumper, Stage 2 TH 400, 12 bolt rear end

[redmonster_2005]

Originally Posted by dezl

Possibly a G2G, for the actual signing of the petition?

i'm down for that. i called him this morning. got the run around.

__________________
04.5 QCSB 6spd afe intake, smarty, optix boost, pyrro and rp gauges, straight piped to 8" stack grid heater delete

[SmokinTheHippies]

Originally Posted by dezl

Possibly a G2G, for the actual signing of the petition?

well we're gonna have a gtg around april 18th at diesel nuts in sac town. bring it there! and pismo the end of the month, bring it there too! we'll get all the signatures we can !

Originally Posted by redmonster_2005

i'm down for that. i called him this morning. got the run around.

i'm gonna try calling on my lunch break. which is.....$hit, its still an hour an half away. damn.

__________________
2002 2500 HO 6 spd 4x4 -433HP- Feb '09 ROTM. Gone to new home!
Thanks Holland Court Diesel!
In search of my next Pig.

http://www.youtube.com/watch?v=axAEF...=youtube_gdata
...."your half a maaaaannn!"

[dezl]

Originally Posted by redmonster_2005

i'm down for that. i called him this morning. got the run around.

like I said when we talked last night, nothing but a bunch of BS! Did you get the "its good for the trees" talk?

__________________
08 Chevy LMM 6" lift 20" monsters w/35's, other than that all stock.

69 Chevelle, BB 427, Ported and polished heads, Custom cam, 10.5/1 compression, Forged TRW pistons, 1.7 Roller rockers, Holley 750 double pumper, Stage 2 TH 400, 12 bolt rear end

[dezl]

ARB Aftermarket Executive Order - Search results.

here are some legal turbo upgrades, as you can see the only who has gone through ARB is Gale banks.

__________________
08 Chevy LMM 6" lift 20" monsters w/35's, other than that all stock.

69 Chevelle, BB 427, Ported and polished heads, Custom cam, 10.5/1 compression, Forged TRW pistons, 1.7 Roller rockers, Holley 750 double pumper, Stage 2 TH 400, 12 bolt rear end

[Chevy-Eater]

3rd time I got the answering machine!!!!!!

__________________
94 regular cab 4x4, no plate, 90hp sticks, 191's, 2095 rack plug, 20* timing , Modded AFC, 5000gsk, Goerend Trans, Lockup switch, WH1C/HT60 Twins 34mm internal gate