2009-10 Dyno Days results and pictures - Page 5

Deanson · 10-25-2009, 02:09 PM

385hp......i never dyno good there....i'v put down 440hp with the everything but the twins, i had a super b special at the time.

i'm going to be changing my setup a bit over winter, hopefully adding some 140-160hp injectors and i'v got a s474 sitting here, just waiting for some parts on order to put it all together!

i thoght you had a 62mm secondary smokin6spd? i'd like to upgrade to a 62/65/14 with a ext. gate eventually

__________________
1997 Dodge Ram 3500 3k GSK, custom plate, 80hp Injectors, Laser cut DV's,16.5*, ARP 12mm studs, Custom Cold Air , 5" TBE Dual Exhaust, TCS Triple Disk, DTS Tranny, 35's , Leveled, HE351/S400 Twins , Flex-a-lite fans

smkin6spd · 10-25-2009, 05:38 PM

Quote:

Originally Posted by Deanson

385hp......i never dyno good there....i'v put down 440hp with the everything but the twins, i had a super b special at the time.

i'm going to be changing my setup a bit over winter, hopefully adding some 140-160hp injectors and i'v got a s474 sitting here, just waiting for some parts on order to put it all together!

i thoght you had a 62mm secondary smokin6spd? i'd like to upgrade to a 62/65/14 with a ext. gate eventually

wish i could have a s475... what are you going to run for the top turbo?

i used to run a single 66/71/16...but the opportunity came and i traded for a 64/65/14 over an s400

it seems to be working ok for me. if i was to do it again i'd get a 64/71/14 over an s480w/race cover and external gate!!!

i'd be pushing over 700hp on #2 only! oh well....i have twins now, i like them, and i can't afford anything better. plus with everything turned down i'm only running 60psi so that's a safe level....don't need to lose my 3rd head gasket already.

__________________
2002 silver 2500 - 6spd w/ SBC 3850 12CB DD, ARB locker, AFE stage II, AFE Bladerunner, FASS 150gph, Hurricane 2's, .093 tubes, htb2 64/14 & S400, 4in exhaust, Snow Performance stage 3, Edge Drag Comp, o-ring head, arp studs, MONSTER VP44! 661hp

Deanson · 10-25-2009, 05:43 PM

what size s400 you running?

__________________
1997 Dodge Ram 3500 3k GSK, custom plate, 80hp Injectors, Laser cut DV's,16.5*, ARP 12mm studs, Custom Cold Air , 5" TBE Dual Exhaust, TCS Triple Disk, DTS Tranny, 35's , Leveled, HE351/S400 Twins , Flex-a-lite fans

smkin6spd · 10-30-2009, 12:09 AM

Quote:

Originally Posted by Deanson

what size s400 you running?

74mm wheel i'm pretty sure. got the setup from a buddy and he doesn't know but i know it's a smaller s400

__________________
2002 silver 2500 - 6spd w/ SBC 3850 12CB DD, ARB locker, AFE stage II, AFE Bladerunner, FASS 150gph, Hurricane 2's, .093 tubes, htb2 64/14 & S400, 4in exhaust, Snow Performance stage 3, Edge Drag Comp, o-ring head, arp studs, MONSTER VP44! 661hp

Deanson · 10-31-2009, 02:57 PM

hmmm could be anything from a 66mm-74mm lol i'm just working on my piping right now for the upgrade soo i'll let you know how it works!

__________________
1997 Dodge Ram 3500 3k GSK, custom plate, 80hp Injectors, Laser cut DV's,16.5*, ARP 12mm studs, Custom Cold Air , 5" TBE Dual Exhaust, TCS Triple Disk, DTS Tranny, 35's , Leveled, HE351/S400 Twins , Flex-a-lite fans

jr22 · 11-01-2009, 08:33 PM

really nice pics

__________________
"Grounds for Divorce" 2008 Dodge Ram 3500 grey with line-x rockers and box. 6.7l cummins 6spd mt 4x4 quad cab long box. lift,gears and 2nd turbo in the works. Looking for sponsorship help for 2010 season.

smkin6spd · 11-02-2009, 10:43 PM

Quote:

Originally Posted by Deanson

hmmm could be anything from a 66mm-74mm lol i'm just working on my piping right now for the upgrade soo i'll let you know how it works!

you better be putting down more than me!

__________________
2002 silver 2500 - 6spd w/ SBC 3850 12CB DD, ARB locker, AFE stage II, AFE Bladerunner, FASS 150gph, Hurricane 2's, .093 tubes, htb2 64/14 & S400, 4in exhaust, Snow Performance stage 3, Edge Drag Comp, o-ring head, arp studs, MONSTER VP44! 661hp

Deanson · 11-03-2009, 07:12 PM

haha i'd love to have solid 800hp , but i think i'd have to upgrade to a 62mm at least on the top charger, i'm also debating getting a ext. wastegate , i dunno i'll play around with the setup now once i get it back together and then upgrade to some bigger injectors

__________________
1997 Dodge Ram 3500 3k GSK, custom plate, 80hp Injectors, Laser cut DV's,16.5*, ARP 12mm studs, Custom Cold Air , 5" TBE Dual Exhaust, TCS Triple Disk, DTS Tranny, 35's , Leveled, HE351/S400 Twins , Flex-a-lite fans

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

10-25-2009, 02:09 PM	#49 (permalink)
Deanson Cummins Enthusiast Join Date: Sep 2008 Posts: 248 Thanks: 1 Thanked 2 Times in 2 Posts Deanson's Truck Pics	385hp......i never dyno good there....i'v put down 440hp with the everything but the twins, i had a super b special at the time. i'm going to be changing my setup a bit over winter, hopefully adding some 140-160hp injectors and i'v got a s474 sitting here, just waiting for some parts on order to put it all together! i thoght you had a 62mm secondary smokin6spd? i'd like to upgrade to a 62/65/14 with a ext. gate eventually __________________ 1997 Dodge Ram 3500 3k GSK, custom plate, 80hp Injectors, Laser cut DV's,16.5*, ARP 12mm studs, Custom Cold Air , 5" TBE Dual Exhaust, TCS Triple Disk, DTS Tranny, 35's , Leveled, HE351/S400 Twins , Flex-a-lite fans

Remove Advertisements Sponsored Links
Dodge Cummins Diesel Forum Advertisement

10-25-2009, 05:43 PM	#51 (permalink)
Deanson Cummins Enthusiast Join Date: Sep 2008 Posts: 248 Thanks: 1 Thanked 2 Times in 2 Posts Deanson's Truck Pics	what size s400 you running? __________________ 1997 Dodge Ram 3500 3k GSK, custom plate, 80hp Injectors, Laser cut DV's,16.5*, ARP 12mm studs, Custom Cold Air , 5" TBE Dual Exhaust, TCS Triple Disk, DTS Tranny, 35's , Leveled, HE351/S400 Twins , Flex-a-lite fans

10-31-2009, 02:57 PM	#53 (permalink)
Deanson Cummins Enthusiast Join Date: Sep 2008 Posts: 248 Thanks: 1 Thanked 2 Times in 2 Posts Deanson's Truck Pics	hmmm could be anything from a 66mm-74mm lol i'm just working on my piping right now for the upgrade soo i'll let you know how it works! __________________ 1997 Dodge Ram 3500 3k GSK, custom plate, 80hp Injectors, Laser cut DV's,16.5*, ARP 12mm studs, Custom Cold Air , 5" TBE Dual Exhaust, TCS Triple Disk, DTS Tranny, 35's , Leveled, HE351/S400 Twins , Flex-a-lite fans

11-01-2009, 08:33 PM	#54 (permalink)
jr22 Diesel Head Join Date: Jul 2007 Location: Wisconsin/Idaho/Alaska Posts: 1,055 Thanks: 0 Thanked 10 Times in 10 Posts jr22's Truck Pics	really nice pics __________________ "Grounds for Divorce" 2008 Dodge Ram 3500 grey with line-x rockers and box. 6.7l cummins 6spd mt 4x4 quad cab long box. lift,gears and 2nd turbo in the works. Looking for sponsorship help for 2010 season.

11-03-2009, 07:12 PM	#56 (permalink)
Deanson Cummins Enthusiast Join Date: Sep 2008 Posts: 248 Thanks: 1 Thanked 2 Times in 2 Posts Deanson's Truck Pics	haha i'd love to have solid 800hp , but i think i'd have to upgrade to a 62mm at least on the top charger, i'm also debating getting a ext. wastegate , i dunno i'll play around with the setup now once i get it back together and then upgrade to some bigger injectors __________________ 1997 Dodge Ram 3500 3k GSK, custom plate, 80hp Injectors, Laser cut DV's,16.5*, ARP 12mm studs, Custom Cold Air , 5" TBE Dual Exhaust, TCS Triple Disk, DTS Tranny, 35's , Leveled, HE351/S400 Twins , Flex-a-lite fans