BD vs Smarty Jr

[BBRam]

Originally Posted by dave@BD Power

maybe we are not selling to the US anymore

Allright, now we have a problem!

__________________
03-3500, DRW, QC, 4x4, DTT Trans, Mag-Hytec, R700 BD Twins, BD IC Boots, BD Billet Flexplate, Lockup Switch, SMARTY TNT-R BETA/TS MP-8, Eliminator Fuel System, Floor It Stage 3 CP3 & Rail Cap, BIG Stix's by FTE, ARP Head Stud's, Springs, Fluidampr, ATS ARC-FLOW, AFE, Boost, Drive Pressure, Pyro, Fuel Pressure, Tran's Temp, Rail Pressure Gauge, GDP Ladder Bars, GrandRock 7" Miters. Old #'s (R/T .021, 60' 1.76, 1/4 ET 13.14 @ 100.45 mph)

[dave@BD Power]

Originally Posted by BBRam

Allright, now we have a problem!

90% of our sales generate from the US, that would be a problem!!! I would be flippen burgers if that was the case

__________________
03 Dodge Ram 2500 2WD Reg Cab
BD X-Tuner stacked with BD X-Power
BD Super-B Turbo & Dual X-Hale Exhaust
BD Max Flow Lift Pump
Ice Box Cold Air Intake

Toll Free 800-887-5030 ext 105 Dave
www.dieselperformance.com
dave@bd-power.com

[BBRam]

Originally Posted by dave@BD Power

I would be flippen burgers if that was the case

If you don't stop actin up, that may be your next option.

__________________
03-3500, DRW, QC, 4x4, DTT Trans, Mag-Hytec, R700 BD Twins, BD IC Boots, BD Billet Flexplate, Lockup Switch, SMARTY TNT-R BETA/TS MP-8, Eliminator Fuel System, Floor It Stage 3 CP3 & Rail Cap, BIG Stix's by FTE, ARP Head Stud's, Springs, Fluidampr, ATS ARC-FLOW, AFE, Boost, Drive Pressure, Pyro, Fuel Pressure, Tran's Temp, Rail Pressure Gauge, GDP Ladder Bars, GrandRock 7" Miters. Old #'s (R/T .021, 60' 1.76, 1/4 ET 13.14 @ 100.45 mph)

[consumed]

-No Foot Print

For clarity, that means when set back to stock it will be hard for the average tec to see that I use a turner?


Also why would you want to stack two products if one does what you need?

[dave@BD Power]

Originally Posted by consumed

-No Foot Print

For clarity, that means when set back to stock it will be hard for the average tec to see that I use a turner?


Also why would you want to stack two products if one does what you need?

Thats correct, "footprint" meaning obvious evidence of a performance module.

For most a single chip or tuner is enough, for others... not so much, some cummins owners like to squeeze every ounce of power they can out of it. With that being said I get my best fuel economy with both my X-Tuner and X-Power on at the same time... stacked.

__________________
03 Dodge Ram 2500 2WD Reg Cab
BD X-Tuner stacked with BD X-Power
BD Super-B Turbo & Dual X-Hale Exhaust
BD Max Flow Lift Pump
Ice Box Cold Air Intake

Toll Free 800-887-5030 ext 105 Dave
www.dieselperformance.com
dave@bd-power.com

[consumed]

Thanks for the info.