BD RAD issues

**IC-Smoke** · 05-05-2008, 01:43 AM

BD RAD issues.... I picked one up awhile back (December) and went to install it in January but had issues so I didnt get it installed, Then on my way home the headgasket went soooo I havent touched it since.

Im now getting around to put it back together and get the RAD installed.

Im going to put in on a 2001 auto BUT the directions and such show a 3rd gen and says "2003 dodge 5.9 cummins automatic".... Issues I had was it shows a blue wire in the diagram but I dont have one in my wiring harness... 2nd it says to trace the Violet/yellow (If I remember right) between the ECM /PCM (where the wire loom goes down to the ECM but I coudlnt find it.... but when we looked at SIXINAROW's truck (2004 CTD) it was right where in plane sight...

The # on the box is torn up (last digit) from tape but the # on the ziploc bag that the wiring was in is : 1031155

Do I have the right RAD? any input?

Thanks
Ian

PS I need this to override the torque management to beat BBRam!

__________________
IAN COLEMAN - President Great Lakes CUMMINS Crew

1990 W350 4x4 LE std cab auto Project Restoration
2001 2500 4x4 3rd gen head, Twin Turbo, DTT trans, Monster pump
2006 2500 4x4 Smarty JR, H2's, B&W, AFE, 5" exhaust, meyer plow

Last edited by IC-Smoke : 05-05-2008 at 01:46 AM.

**dave@BD Power** · 05-05-2008, 01:21 PM

"PS I need this to override the torque management to beat BBRam!"

In that case, lets not waste time!

Try this...

Attached Images

Anti-De-fueler-(RAD).jpg (28.7 KB, 48 views)

__________________
03 Dodge Ram 2500 "Reg Cab"
Fuel: BD X-Tuner - BD X-Power - Max Flow Lift Pump
Air: BD Super-B Turbo - BD Intercooler - Dual X-Hale Exhaust - BD Exhaust Manifold - BD X-Power Intake Elbow - Ice Box Air Intake
Power Train: BD Transmission - BD Low Stall Convertor

Dave Dias
dave@bernhausendiesel.com

**IC-Smoke** · 05-05-2008, 01:44 PM

Thanks Dave!!

Do I have the right RAD though? your diagram shows a 3 position switch and Ive got a 2 position....

None of the wires have been spliced, want to trade?

__________________
IAN COLEMAN - President Great Lakes CUMMINS Crew

1990 W350 4x4 LE std cab auto Project Restoration
2001 2500 4x4 3rd gen head, Twin Turbo, DTT trans, Monster pump
2006 2500 4x4 Smarty JR, H2's, B&W, AFE, 5" exhaust, meyer plow

BBRam · 05-05-2008, 01:53 PM

Quote:

Originally Posted by IC-Smoke

PS I need this to override the torque management to beat BBRam!

Your going to need more then that!!!!!!!!

__________________

03-3500, DRW, QC, 4x4, R850 BD Twins, BD IC Boots, BD Billet Flexplate, Full Billet DTT Trans, Lockup Switch, SMARTY TNT-R / TS MP-8, Wicked Diesels Eliminator Fuel System & Coolant Bypass, Floor It Stage 3 CP3 & Rail Cap, BIG Stix's by FTE, ARP Head Stud's, Springs, Fluidampr, ATS ARC-FLOW, Mag-Hytec, AFE, Boost, Drive Pressure, Pyro, Fuel Pressure, Tran's Temp, Rail Pressure Gauge, GDP Ladder Bars, GrandRock 7" Miters. (R/T .021, 60' 1.76, 1/4 ET 13.03 @ 102.05 mph)

July 2009 Cummins Forum ROTM Winner

95 1500 Sport 2wd Cummins Drag Truck under construction.

"In search of the Magic Dyno"

**dave@BD Power** · 05-05-2008, 02:12 PM

Quote:

Originally Posted by BBRam

Your going to need more then that!!!!!!!!

Here try this, page 11

Attached Images

1057650-5 Dodge Speed Elimanator.pdf (569.3 KB, 43 views)

__________________
03 Dodge Ram 2500 "Reg Cab"
Fuel: BD X-Tuner - BD X-Power - Max Flow Lift Pump
Air: BD Super-B Turbo - BD Intercooler - Dual X-Hale Exhaust - BD Exhaust Manifold - BD X-Power Intake Elbow - Ice Box Air Intake
Power Train: BD Transmission - BD Low Stall Convertor

Dave Dias
dave@bernhausendiesel.com

***Graphic Man*** · 05-05-2008, 02:43 PM

don't worry Ian.....i am the only one you need to fear

__________________
08 Mega cab is on it's way
SOLD01 4X4 Q-cab Sport Monster VP, Redline Injectors, twins 66/S480 with race cover, full billet trans etc,
Special thanks to: Redline diesel and Diesel Dr.s

**IC-Smoke** · 05-05-2008, 06:42 PM

Quote:

Originally Posted by dave@BD Power

Here try this, page 11

Thank you!!!

thumbsup

Once I get it running Ill install and see if it works:thumbsup

hahahah Nothing a little "Goo Gone" cant fix

__________________
IAN COLEMAN - President Great Lakes CUMMINS Crew

1990 W350 4x4 LE std cab auto Project Restoration
2001 2500 4x4 3rd gen head, Twin Turbo, DTT trans, Monster pump
2006 2500 4x4 Smarty JR, H2's, B&W, AFE, 5" exhaust, meyer plow

SIXINAROW · 05-05-2008, 09:55 PM

can't wait to test all these trucks out, hay

I have an Idea

lets try it next weekend oh we have to wait for Ian!!

__________________
Charles built trans, SDX 5X16, soon to be mounted silver bullet
6>8

**IC-Smoke** · 05-06-2008, 08:18 AM

It will be running this week, Im just waiting on UPS to deliver some parts

__________________
IAN COLEMAN - President Great Lakes CUMMINS Crew

1990 W350 4x4 LE std cab auto Project Restoration
2001 2500 4x4 3rd gen head, Twin Turbo, DTT trans, Monster pump
2006 2500 4x4 Smarty JR, H2's, B&W, AFE, 5" exhaust, meyer plow

05-05-2008, 01:43 AM	#1 (permalink)
IC-Smoke MI Chapter President Join Date: Nov 2005 Location: PITTSFORD, MI Posts: 5,296 Thanks: 14 Thanked 49 Times in 37 Posts IC-Smoke's Truck Pics	BD RAD issues BD RAD issues.... I picked one up awhile back (December) and went to install it in January but had issues so I didnt get it installed, Then on my way home the headgasket went soooo I havent touched it since. Im now getting around to put it back together and get the RAD installed. Im going to put in on a 2001 auto BUT the directions and such show a 3rd gen and says "2003 dodge 5.9 cummins automatic".... Issues I had was it shows a blue wire in the diagram but I dont have one in my wiring harness... 2nd it says to trace the Violet/yellow (If I remember right) between the ECM /PCM (where the wire loom goes down to the ECM but I coudlnt find it.... but when we looked at SIXINAROW's truck (2004 CTD) it was right where in plane sight... The # on the box is torn up (last digit) from tape but the # on the ziploc bag that the wiring was in is : 1031155 Do I have the right RAD? any input? Thanks Ian PS I need this to override the torque management to beat BBRam! __________________ IAN COLEMAN - President Great Lakes CUMMINS Crew 1990 W350 4x4 LE std cab auto *Project Restoration* 2001 2500 4x4 3rd gen head, Twin Turbo, DTT trans, Monster pump 2006 2500 4x4 Smarty JR, H2's, B&W, AFE, 5" exhaust, meyer plow Last edited by IC-Smoke : 05-05-2008 at 01:46 AM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Remove Advertisements Sponsored Links
Dodge Cummins Diesel Forum Advertisement

05-05-2008, 01:44 PM	#3 (permalink)
IC-Smoke MI Chapter President Join Date: Nov 2005 Location: PITTSFORD, MI Posts: 5,296 Thanks: 14 Thanked 49 Times in 37 Posts IC-Smoke's Truck Pics	Thanks Dave!! Do I have the right RAD though? your diagram shows a 3 position switch and Ive got a 2 position.... None of the wires have been spliced, want to trade? __________________ IAN COLEMAN - President Great Lakes CUMMINS Crew 1990 W350 4x4 LE std cab auto *Project Restoration* 2001 2500 4x4 3rd gen head, Twin Turbo, DTT trans, Monster pump 2006 2500 4x4 Smarty JR, H2's, B&W, AFE, 5" exhaust, meyer plow

05-05-2008, 02:43 PM	#6 (permalink)
*Graphic Man* Go for Broke Join Date: Nov 2005 Location: Mississauga ont. Canada Posts: 7,788 Thanks: 1 Thanked 14 Times in 13 Posts Graphic Man's Truck Pics	don't worry Ian.....i am the only one you need to fear __________________ 08 Mega cab is on it's way SOLD01 4X4 Q-cab Sport Monster VP, Redline Injectors, twins 66/S480 with race cover, full billet trans etc, Special thanks to: Redline diesel and Diesel Dr.s

05-05-2008, 09:55 PM	#8 (permalink)
SIXINAROW Diesel Head Join Date: Jul 2006 Location: Jackson, MI Posts: 1,012 Thanks: 2 Thanked 5 Times in 4 Posts SIXINAROW's Truck Pics	can't wait to test all these trucks out, hay I have an Idea lets try it next weekend oh we have to wait for Ian!! __________________ Charles built trans, SDX 5X16, soon to be mounted silver bullet 6>8

05-06-2008, 08:18 AM	#9 (permalink)
IC-Smoke MI Chapter President Join Date: Nov 2005 Location: PITTSFORD, MI Posts: 5,296 Thanks: 14 Thanked 49 Times in 37 Posts IC-Smoke's Truck Pics	It will be running this week, Im just waiting on UPS to deliver some parts __________________ IAN COLEMAN - President Great Lakes CUMMINS Crew 1990 W350 4x4 LE std cab auto *Project Restoration* 2001 2500 4x4 3rd gen head, Twin Turbo, DTT trans, Monster pump 2006 2500 4x4 Smarty JR, H2's, B&W, AFE, 5" exhaust, meyer plow