shaved door handles - Page 2

Nevr2Loe · 10-11-2008, 01:28 PM

The Street Scene Part Number for the Handle Kit is 95061126 and Belltech also makes one, But Im not sure of the Part Number....

Also The Part Number on the Ball is 53300, Its a Valley Tow Part Number, any place that sells Hitches should be able to get it....

__________________
2000 Dodge Ram 3500 2wd 5 Speed/ MBRP Exhaust/AFE CAI/Silencer Ring MIA/ BD Diesel Lift Pump/Bully Dog OutLook w/ Power Adder... To Be Continued.......

Rajkalkat · 10-11-2008, 04:25 PM

i have my tailgate done, i think it makes it look so much better

__________________

2006 Dodge Ram 2500 Cummins
Single Pump, Single Turbo, and Lots of Powder and Chrome making close to 700hp and running 12.03 at 121 with a .102 jet

fordkiller43 · 10-11-2008, 04:35 PM

that hitch ball is freakin huge!!!!!!!!!!!

__________________
Justin '02 2500 4X4; Built trans, Drag Comp, 150's, AFE stg II, Airdog 150, 5" str8 pipe, 5" lift w/ 35's, frontier bumper..

**Neel** · 10-11-2008, 07:21 PM

maybe ill just do the tail gate it looks a lot cleaner, i like it

__________________
2006 cummins 3500 laramie murdered out
13.5'' lift, 20x12's on 41'' iroks
TURBO ENGINEERING CORP. 617hp, stock cp3,stock lift pump, and on 41's
custom paint and amp step getting done

major beat in the bed

fordkiller43 · 10-11-2008, 07:27 PM

i think shaving the tailgate would look good but the door handles is a little too ricey IMO.

__________________
Justin '02 2500 4X4; Built trans, Drag Comp, 150's, AFE stg II, Airdog 150, 5" str8 pipe, 5" lift w/ 35's, frontier bumper..

Rajkalkat · 10-12-2008, 12:51 AM

here is a picture of mine

this picture is kinda of old, i didnt have my painted plastic bumper pad on for this picture

__________________

2006 Dodge Ram 2500 Cummins
Single Pump, Single Turbo, and Lots of Powder and Chrome making close to 700hp and running 12.03 at 121 with a .102 jet

Luvnacummins · 10-12-2008, 12:52 AM

Quote:

Originally Posted by fordkiller43

i think shaving the tailgate would look good but the door handles is a little too ricey IMO.

I agree!!

__________________
I turn wrenches....

**Neel** · 10-12-2008, 02:45 AM

yeah you made a good point then ill be oredering a tailgate kit

__________________
2006 cummins 3500 laramie murdered out
13.5'' lift, 20x12's on 41'' iroks
TURBO ENGINEERING CORP. 617hp, stock cp3,stock lift pump, and on 41's
custom paint and amp step getting done

major beat in the bed

***Cummins6speed*** · 10-12-2008, 01:35 PM

Quote:

Originally Posted by Rajkalkat

here is a picture of mine

this picture is kinda of old, i didnt have my painted plastic bumper pad on for this picture

That looks really good :thumbsup. And that red truck needs bigger tires

__________________
My truck: 06 5.9 G56 4x4 Quad Cab Short Bed Patriot Blue. Smarty TNT, Valair 3600DD, DiPricol's, Home made intake w/ amsoil filter, Straight Piped w/ 7" tip, silencer ring MIA, glove box sticker MIA 2/28/09-470hp/980tq
FOR SALE: PM ME
"Calling an illegal alien an 'undocumented immigrant' is like calling a drug dealer an 'unlicensed pharmasist'"

Megadeth · 10-12-2008, 03:17 PM

How doesn't it leave a hole in the tailgate where the original handle was?

__________________
07 5.9 G56 with a few goodies.

JDiepstra · 10-12-2008, 03:34 PM

You fill it in with "bondo".

__________________
2004.5, 2500, Cummins 600, 4x4, SLT, QC, SB, 4.10's, 315's, Molten Red. 48RE by HTS

. BullyDog Crazy Larry + MP-8 stack, AFE PG7 and Blade Runner, Silverline and Magnaflow mufflers into 6" mitre, DiPricol pyro, boost, trans, fuel, and rail. Train Horns for

Rajkalkat · 10-13-2008, 12:56 AM

Quote:

Originally Posted by Cummins6speed

That looks really good :thumbsup. And that red truck needs bigger tires

that was sitting on stocks but normally it rides on 38s

__________________

2006 Dodge Ram 2500 Cummins
Single Pump, Single Turbo, and Lots of Powder and Chrome making close to 700hp and running 12.03 at 121 with a .102 jet

10-11-2008, 07:21 PM	#16 (permalink)
Neel Northern CA Chapter President Join Date: Sep 2008 Location: red bluff, california Posts: 3,513 Thanks: 9 Thanked 17 Times in 16 Posts Neel's Truck Pics	maybe ill just do the tail gate it looks a lot cleaner, i like it __________________ 2006 cummins 3500 laramie murdered out 13.5'' lift, 20x12's on 41'' iroks TURBO ENGINEERING CORP. 617hp, stock cp3,stock lift pump, and on 41's custom paint and amp step getting donemajor beat in the bed

10-12-2008, 02:45 AM	#20 (permalink)
Neel Northern CA Chapter President Join Date: Sep 2008 Location: red bluff, california Posts: 3,513 Thanks: 9 Thanked 17 Times in 16 Posts Neel's Truck Pics	yeah you made a good point then ill be oredering a tailgate kit __________________ 2006 cummins 3500 laramie murdered out 13.5'' lift, 20x12's on 41'' iroks TURBO ENGINEERING CORP. 617hp, stock cp3,stock lift pump, and on 41's custom paint and amp step getting donemajor beat in the bed

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

10-11-2008, 01:28 PM	#13 (permalink)
Nevr2Loe Cummins Fan Join Date: Aug 2008 Posts: 30 Thanks: 0 Thanked 0 Times in 0 Posts Nevr2Loe's Truck Pics	The Street Scene Part Number for the Handle Kit is 95061126 and Belltech also makes one, But Im not sure of the Part Number.... Also The Part Number on the Ball is 53300, Its a Valley Tow Part Number, any place that sells Hitches should be able to get it.... __________________ 2000 Dodge Ram 3500 2wd 5 Speed/ MBRP Exhaust/AFE CAI/Silencer Ring MIA/ BD Diesel Lift Pump/Bully Dog OutLook w/ Power Adder... To Be Continued.......

Remove Advertisements Sponsored Links
Dodge Cummins Diesel Forum Advertisement

10-11-2008, 04:25 PM	#14 (permalink)
Rajkalkat Diesel Freak Join Date: Jan 2007 Location: Yuba City Posts: 629 Thanks: 3 Thanked 3 Times in 3 Posts Rajkalkat's Truck Pics	i have my tailgate done, i think it makes it look so much better __________________ 2006 Dodge Ram 2500 Cummins Single Pump, Single Turbo, and Lots of Powder and Chrome making close to 700hp and running 12.03 at 121 with a .102 jet

10-11-2008, 04:35 PM	#15 (permalink)
fordkiller43 Diesel Head Join Date: Aug 2007 Location: Copperas Cove, TX Posts: 1,705 Thanks: 13 Thanked 7 Times in 6 Posts fordkiller43's Truck Pics	that hitch ball is freakin huge!!!!!!!!!!! __________________ Justin '02 2500 4X4; Built trans, Drag Comp, 150's, AFE stg II, Airdog 150, 5" str8 pipe, 5" lift w/ 35's, frontier bumper..

10-11-2008, 07:27 PM	#17 (permalink)
fordkiller43 Diesel Head Join Date: Aug 2007 Location: Copperas Cove, TX Posts: 1,705 Thanks: 13 Thanked 7 Times in 6 Posts fordkiller43's Truck Pics	i think shaving the tailgate would look good but the door handles is a little too ricey IMO. __________________ Justin '02 2500 4X4; Built trans, Drag Comp, 150's, AFE stg II, Airdog 150, 5" str8 pipe, 5" lift w/ 35's, frontier bumper..

10-12-2008, 12:51 AM	#18 (permalink)
Rajkalkat Diesel Freak Join Date: Jan 2007 Location: Yuba City Posts: 629 Thanks: 3 Thanked 3 Times in 3 Posts Rajkalkat's Truck Pics	here is a picture of mine this picture is kinda of old, i didnt have my painted plastic bumper pad on for this picture __________________ 2006 Dodge Ram 2500 Cummins Single Pump, Single Turbo, and Lots of Powder and Chrome making close to 700hp and running 12.03 at 121 with a .102 jet

10-12-2008, 03:17 PM	#22 (permalink)
Megadeth Diesel Freak Join Date: Apr 2008 Location: Draper, UT Posts: 979 Thanks: 78 Thanked 28 Times in 23 Posts Megadeth's Truck Pics	How doesn't it leave a hole in the tailgate where the original handle was? __________________ 07 5.9 G56 with a few goodies.

10-12-2008, 03:34 PM	#23 (permalink)
JDiepstra Diesel Head Join Date: Sep 2007 Location: MI Posts: 4,664 Thanks: 13 Thanked 163 Times in 133 Posts JDiepstra's Truck Pics	You fill it in with "bondo". __________________ 2004.5, 2500, Cummins 600, 4x4, SLT, QC, SB, 4.10's, 315's, Molten Red. 48RE by HTS . BullyDog Crazy Larry + MP-8 stack, AFE PG7 and Blade Runner, Silverline and Magnaflow mufflers into 6" mitre, DiPricol pyro, boost, trans, fuel, and rail. Train Horns for