Smoked lights

[jmorris89]

How do I go about smoking lights on my truck? do I spray the inside or outside? Cause I smoke a set of lights on my old 97 chevy once upon a time but I did the insides...I have read a few threads and it seems you some of you guys are smoking the outsides...I would also like to do the thrid brake light...And the headlights...I saw a guy that did his headlights around the reflective surface...looked nice....any info you guys can give would be greatly appreciated....

Thanks

__________________
2004.5 laramie-magnaflow muffler,silencer ring...long gone, Bully Dog PMT (no crazy larry yet) , AFE stage 2 cold air. more on the way........

[TexasHemi]

I know you can buy them smoked... but I didn't know you could do that yourself.

__________________
What I want:
2000-2002 Ram 2500 - 4x4, FASS, 4" TBE, Smarty, stacks, and other extras (need )

Bear Creek Car Repair

[BBRam]

I believe you can buy tint in a can.

__________________
03-3500, DRW, QC, 4x4, DTT Trans, Mag-Hytec, R700 BD Twins, BD IC Boots, BD Billet Flexplate, Lockup Switch, SMARTY TNT-R BETA/TS MP-8, Eliminator Fuel System, Floor It Stage 3 CP3 & Rail Cap, BIG Stix's by FTE, ARP Head Stud's, Springs, Fluidampr, ATS ARC-FLOW, AFE, Boost, Drive Pressure, Pyro, Fuel Pressure, Tran's Temp, Rail Pressure Gauge, GDP Ladder Bars, GrandRock 7" Miters. Old #'s (R/T .021, 60' 1.76, 1/4 ET 13.14 @ 100.45 mph)

[Brentc]

I have a buddy who put Tint on the outside and did a clear coat..Also another buddy who just painted his third light, and both tail lights and head lights and both ways looked really good i can get pics...
This Pic is the one who tented and clear coated his tail lights... i will work on getting the other guys truck for you.

__________________
2007, 3500 , Smarty REVO, with a Leveling Kit, 2" rear Spacers, Rockstar with the 305 Nitto's, 4" Straight Pipe...
More to come with a little bit of

[jmorris89]

Originally Posted by BBRam

I believe you can buy tint in a can.

Yes I did a search on here and it pulled up a few threads...basically if was scuff the outside with some like 2000 grit paper...clean it off with some paint thinner or something like that....then get the VHT-night shades stuff.....a couple of thin coats...and maybe a coat of clear or two......I can do that....but what I am really interested in was doing my headlights...I havent pulled one out yet to take a look at it but how do you get them apart....and when you do....I didnt want to tent the lens itself...I wanted to paint the chrome part of the lights...around the reflective surfaces for the headlights...black.....I know it can be done...I just would like to know who has done it if they have any advise to give because I am going to attempt it one way or another..I would just rather not have to buy another headlight if I screw one up....

__________________
2004.5 laramie-magnaflow muffler,silencer ring...long gone, Bully Dog PMT (no crazy larry yet) , AFE stage 2 cold air. more on the way........

[Kyle@XDP]

yea the VHT stuff is great and cheap, the pn# is sp-999.

__________________

Ask Me About Our Monthly Specials

Special pricing on DDP products
New Lower pricing on Mag-Hytec pans

**Be Sure To Ask About Our Forum Discounts**

Kyle x200

[jmorris89]

hmmmmm did you just order it online...or would an O'riely's or Autozone be able to get it for me?

__________________
2004.5 laramie-magnaflow muffler,silencer ring...long gone, Bully Dog PMT (no crazy larry yet) , AFE stage 2 cold air. more on the way........

[A_White]

Summit carries it.

__________________
FOR SALE-2001 Dodge 2500 5.5 Fabtech long arm, banks high ram, Summit 4 inch exhaust, Airaid intake, EDGE EZ, DiPricol pyro, fuel, boost, and trans, 17-in American Racing Victor, 35-12.50 BFG KM2s, tinted windows, tails, and 3rd brake.

[dom42]

look at what this guy did. they are awsome. but he seem like he doesn't want any1 to know where or how he did it..........i would want to as well. they are sweet.

smoke lights.

__________________
2006 2500 QCLB 4x4 auto-5" SilverLine TBE - cfm plus- s&b CAI system- 6 inch superlift- kore components- 325/60/20 bfg AT's- 20" motometal- fs2500 on engine & tranny- maghytec all around- 4.10gears- edge juiced/w attitude- truckcoverusa roll out cover- rhino linings- firestone bags- Nfab 6step- Thuren trackbar
k7gsxr1000- full race bike- ohlins all around-brembo masters-full ti arata exh-pretty much everything

[J-Mo]

anyone got any info on what those lights are?

__________________
Black 08 6.7 QC auto 4x4 sport, AFE stage2, PDI 5" TBE 6" tip, Edge Jucie/att./hot, mp-8, egr delete, 4.5 fabtech, dual bilstiens, thuren trackbar, fox stabilizer, 35"toyo mt's, 20" black rockstars, tint, bed cover, srt hood.....more on the way

[TexasHemi]

I'd say the blacked stock lights with the halos and LED bar at the bottom off of aftermarket lights...

__________________
What I want:
2000-2002 Ram 2500 - 4x4, FASS, 4" TBE, Smarty, stacks, and other extras (need )

Bear Creek Car Repair

[Blktaws6]

Originally Posted by dom42

look at what this guy did. they are awsome. but he seem like he doesn't want any1 to know where or how he did it..........i would want to as well. they are sweet.

smoke lights.

I too would like to know where he got those or what he actually did do to make them. But it seems as if he only gets online to start a new post of what he did and doesn't come back online until he does something different.

__________________
2007 5.9 2500 Mega Cab 4x4, Black.