Sprayed my rockers today

[lvin4jc]

Originally Posted by cummins724

That truck is awesome Tank. Did you just roll it on?

I'm not Tank, but i've done 2-3 truck beds, plus some accessories and an entire Suburban exterior with Herculiner and as far as I know rolling it on is the only option with Herculiner, I'd be surprised if you could shoot it on, it's extremely thick. Just try and get it off of your hands

__________________

2001 4X4 Auto SLT Laramie - DANA 60/DANA 70, 3.55's - Isspro Gauges, FP, Pyro, Boost, Trans. Temp. - HBS 2" Leveling Kit - Straight Pipe - Amsoil Nanofiber 4510 CAI - Quadzilla XZT+ - Debadged - 285/75/16 Firestone Destination M/T's

230,000 miles as of 08/09 - - All Cummins all the time!

[cummins724]

Originally Posted by lvin4jc

I'm not Tank, but i've done 2-3 truck beds, plus some accessories and an entire Suburban exterior with Herculiner and as far as I know rolling it on is the only option with Herculiner, I'd be surprised if you could shoot it on, it's extremely thick. Just try and get it off of your hands

I was looking into a product called Al's Liner. I posted a thread on 2 different forums showing the Al's kit. I had multiple pm saying "I am a herculiner dealer, Al's is rebadged herculiner". The Al's liner is tintable & sprays on with a gun.

__________________
99 QC 4x4, 5 speed, M5's, Super B Special, 3rd Gen E-Brake, ADRENALINE/SMARTY/Redline, AFE, Iron Giant, Fluidamper, Airdog, ARP, Orings, HD springs, DSS & 3rd Gen Bar, 607hp/1141lbft http://www.youtube.com/watch?v=XmQhCXQbedg

[12VRattler]

Has anyone tried this stuff?

Cote-L Distribution Company

Thats what I was planning to use!! I have used a lot of the rattle can products and they wear easy. Its cheap but just plan on patching the chips you will get.

[R_Zachs]

looks good though. shoot 89$ to do my rockers and bumpers. qouted 700 locally!

__________________
05 3500 QC LB 6spd Smarty JR(POD) -ISSPRO fuel/EGT/Boost|$50 4" intake|MIA silencer ring,cat,muff|2" Procomp LVL kit| 100w KC's, HB4 80w Fog bulbs|sprayed bed|diamond 5th wheel|PDI Manifold 4" DP 5"straight to 5"stacks

[kenny110482]

Cant beat that price for sure!!

__________________
Black 2003 Dodge 2500 QCSB, 4X4, 5 speed, 6" Aussies, Smarty, KC Customs intake manifold, 90HP Dragon Flow Injectors, AirDog 150 , Quad Boost Fooler, DiPricol FP Guage, Isspro Performax: Rail Pressure, Pyro, Boost, Few other interior goodies

[lvin4jc]

Originally Posted by cummins724

I was looking into a product called Al's Liner. I posted a thread on 2 different forums showing the Al's kit. I had multiple pm saying "I am a herculiner dealer, Al's is rebadged herculiner". The Al's liner is tintable & sprays on with a gun.

Cool beans, I stand corrected. I'd love to see the nozzle that can spray those little chunks of rubber, I bet that stuff splatters like crazy when you spray it? It'd be nice to spray though, I know from experience that if you get it on your skin, plan to have it for 2-3 days or stick your hand to the wire wheel on a bench grinder

Originally Posted by 12VRattler

Has anyone tried this stuff?

Cote-L Distribution Company

Thats what I was planning to use!! I have used a lot of the rattle can products and they wear easy. Its cheap but just plan on patching the chips you will get.

Dunno, but you can get the Duplicolor as a roll on too, I just did it to mine.

P.S. I love the before/after shot of that truck on their site, the bedliner even made the taillights look better

__________________

2001 4X4 Auto SLT Laramie - DANA 60/DANA 70, 3.55's - Isspro Gauges, FP, Pyro, Boost, Trans. Temp. - HBS 2" Leveling Kit - Straight Pipe - Amsoil Nanofiber 4510 CAI - Quadzilla XZT+ - Debadged - 285/75/16 Firestone Destination M/T's

230,000 miles as of 08/09 - - All Cummins all the time!

[TANK'S 250]

Originally Posted by lvin4jc

I know from experience that if you get it on your skin, plan to have it for 2-3 days or stick your hand to the wire wheel on a bench grinder

I know exactly what you mean...

__________________
2005 F-250, CC,SB,PSD, MANUAL TRANNY
Icon 4.5" lift, 41" IROKS, and some other stuff
MY PICS

[cummins724]

Originally Posted by TANK'S 250

I know exactly what you mean...

This pic was taken today Tank?

__________________
99 QC 4x4, 5 speed, M5's, Super B Special, 3rd Gen E-Brake, ADRENALINE/SMARTY/Redline, AFE, Iron Giant, Fluidamper, Airdog, ARP, Orings, HD springs, DSS & 3rd Gen Bar, 607hp/1141lbft http://www.youtube.com/watch?v=XmQhCXQbedg

[madtrucker66]

Guys I just want to know Hows Going to do my Truck HA HA

__________________
Madtrucker66 2006, 2500,quad.4x4 short box Str-8 with 6" tip. Edge-Att-hotlink.Mp-8,Volant intake, Air Force one Intake Horn.Blacked out lightsSome tranny Modds.

[12valvemafia]

kenny i am a professional auto body painter, that looks really good. Let me know if you wanna do mine lol.

__________________
1993 W250,bullydog fuel pin,366 spring and isspro guages borgenson steering upgrade.

[kenny110482]

Originally Posted by 12valvemafia

kenny i am a professional auto body painter, that looks really good. Let me know if you wanna do mine lol.

Hahaha. Thanks bud.

__________________
Black 2003 Dodge 2500 QCSB, 4X4, 5 speed, 6" Aussies, Smarty, KC Customs intake manifold, 90HP Dragon Flow Injectors, AirDog 150 , Quad Boost Fooler, DiPricol FP Guage, Isspro Performax: Rail Pressure, Pyro, Boost, Few other interior goodies

[dualinchevy]

hows it holding? any more abuse on them? I really want to use the stuff on my fenders! keep us updated!