500+hp stroker motor

[AZCOWBOY09]

Hello All,

I'm making this post for a Friend of mind who is going through some tough times. He owns a sandcar business and business is extremely slow right now. He was in the process of building his personal sandcar when the economy went south. At this point that project has been put on hold indefinitely. He needs to sell his motor that he had built for the car. It's a small block chevy, 383 stroker, iron head/iron block, has dynoed at 500+hp at the fly wheel, comes complete with a carb intake and ignition. Motor has only run on the dyno after being built. This motor would be perfect for either a sand car or a drag car. If anybody is interested in this please pm me and I will get you his contact info. I know he has over $8500 in this motor but he is very motivated to sell this ASAP. Like I said he is in a very tough position. Please only local AZ inquiries.

If the motor is something your not looking for, he also builds some of the best cages for rhino's rangers, etc. Also builds long travel suspensions, accessories, front/rear bumpers, exhaust all for utv's. So if this is something you have interest in again please pm me and I will put you in contact with him. Hope something comes of this, I'm just trying to help a friend in desperate need.

Thanks everyone
Bob

__________________
2004.5 DODGE 3500 DRW CUMMINS
Some go-fast stuff from AutoZone's performance aisle.
"FASTER THEN MOST, SLOWER THEN SOME" WANNA RACE?

[NWTDIESEL]

Originally Posted by AZCOWBOY09

Hello All,

I'm making this post for a Friend of mind who is going through some tough times. He owns a sandcar business and business is extremely slow right now. He was in the process of building his personal sandcar when the economy went south. At this point that project has been put on hold indefinitely. He needs to sell his motor that he had built for the car. It's a small block chevy, 383 stroker, iron head/iron block, has dynoed at 500+hp at the fly wheel, comes complete with a carb intake and ignition. Motor has only run on the dyno after being built. This motor would be perfect for either a sand car or a drag car. If anybody is interested in this please pm me and I will get you his contact info. I know he has over $8500 in this motor but he is very motivated to sell this ASAP. Like I said he is in a very tough position. Please only local AZ inquiries.

If the motor is something your not looking for, he also builds some of the best cages for rhino's rangers, etc. Also builds long travel suspensions, accessories, front/rear bumpers, exhaust all for utv's. So if this is something you have interest in again please pm me and I will put you in contact with him. Hope something comes of this, I'm just trying to help a friend in desperate need.

Thanks everyone
Bob

I would be interested in a price with that motor in a basic long travel rolling chassis. Please.

Also, i need a cage in my dmax if thats something he can do.

__________________

76mm turbo,cam,crowers,cut pistons,ATS dual cp3,60% nozzles,SoCal heads,ATS trans,Yukon locker,6" stack,Proxes
791hp #2 only/11.44@121 #2 only

[smoked05]

Ill talk to some of my gearhead friends down here. Ill talk to my old boss that owns a machine shop if he knows anyone. PM me his info might be interested in a bumper, and some other stuff.

__________________
2005 dodge 2500 rancho 4in lift, 37" interco vortracs, debadged, smarty, 5" mbrp exhaust, no silencer, swiss cheesed airbox, in dash dvd player for those long trips. oops and almost forgot all smoked out

[Nemo]

Originally Posted by NWTDIESEL

I would be interested in a price with that motor in a basic long travel rolling chassis. Please.

Also, i need a cage in my dmax if thats something he can do.

UMS Tuning in Tempe can probably do a cage for you... They did the cage in my Evo...