![]() |
|
|
- HOME
- FORUMS
- GARAGE
- TECH
- ARTICLES
- CHAT
- CLASSIFIEDS
- REVIEWS
- VIDEOS
- MEMBER MAP
- STORE
- - REGISTER - CALENDAR - INFO - SITE HELP - RULES - STAFF - MEMBERSHIP - CONTACT US - |
|
Welcome to the Dodge Cummins Diesel Forum, the fastest growing Dodge Diesel Community on the internet. You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact contact us |
|
|||||||
| Register | Forums | FAQ | Members List | Calendar | Active Topics | Mark Forums Read |
| 98.5-02 Technical & Diagnostics What is it, what does it do... Pretty much the learning center for the 98.5-2002 Dodge Diesel's. |
![]() |
|
|
LinkBack | Thread Tools | Display Modes |
|
|
#1 (permalink) |
|
Posts: n/a
|
Power Control Module (PCM)
Other wise known as JTEC??? Dont ask me why. The PCM is under the hood on 98.5 and up electronic controled Cummins motors. It is mounted to the firewall near the passenger hood hinge, As input signals to the PCM change the PCM adjustes its response to the output devices, The PCM controls charging system speed control transmission air conditioning APPS CPS Auto shut down (ASD) Battery temp Battery voltage Brake switch CCD+ CCD- CPS Data link port for scan tool fuel level Alternator output Ignition Output shaft speed Overdrive if auto Cruze control Tranny temp auto Tranny pressure auto ABS braking SO next time you have the high pressure washer fired up stay away from the PCM or it will bite you Cheers, Kevin Last edited by Andy : 03-24-2007 at 02:49 PM. |
|
| Sponsored Links | |
Advertisement |
|
|
|
#2 (permalink) |
|
Newbie
|
JTEC stands for Jeep Truck Engine Controller. :thumbsup
|
|
|
|
| The Following User Says Thank You to 8V92TA For This Useful Post: | keolamuerte (08-11-2009) |
|
|
#3 (permalink) |
|
Cummins Enthusiast
Join Date: Aug 2006
Location: Houston, Texas
Posts: 286
Thanks: 0
Thanked 0 Times in 0 Posts
|
Hey Whitmore where is the best place to get a replacement PCM? I have already purchased one from a dealership located near me only to find that the part was faulty. Come to find out the dealership and general manager are refusing to warranty the faulty part. So I have filed complaints through the BBB and Chrsyler so we will see what happens there. Anywho I am out $550 for the PCM and my truck is still down so I was just curious if you knew anyone who you would vouch for that might have a new/used PCM. Thanks Josh :fist: |
|
|
|
| Sponsored Links | |
Advertisement |
|
![]() |
| Thread Tools | |
| Display Modes | |
|
|