Trying to Make Power

Nevr2Loe · 09-04-2008, 08:46 AM

Hows it goin, Im new to the Diesel thing and I am trying to make some power. My goal is 800 ft lb of torque and whatever HP Number comes with that. I have a 2000 Ram 3500 Single Cab Dually 5.9L Cummins 5-Speed 2wd... Any Help yall could give would be awesome... By the way, I have a Cold air Intake, MBRP Turbo Back Exhaust, and BD Diesel Lift Pump Replacement.

**Meyer** · 09-04-2008, 08:48 AM

I would get a Quadzilla adrenaline it will put you very close to that then a small set or injectors, and a turbo if the temps get out of control.

Tyler
MPF,LLC

__________________
Meyer Performance & Fabrication,LLC
Home of your diesel performance and off-road needs.
www.meyerperformance.com
(812)-344-4421-Tyler

***nick03*** · 09-04-2008, 08:51 AM

Some injectors and a Adrenaline you should be there maybe a little over!

__________________
07 Dodge 3500 6.7 6spd Manual, Inferno Red, ProComps Extreme AT 305-65-17, AFE intake w/ torque tube. MP-8 & Edge Juice W/ Attitude! Valair New12.25" 3400# Dual Disk Ceramic/Ceramic on stock Hydro's, 10 months old w/28,500+miles. A big thank you to John at Holland Court Diesel & Dan at Valair

!

**Meyer** · 09-04-2008, 08:54 AM

Ya it should be over 900 pretty easy.

__________________
Meyer Performance & Fabrication,LLC
Home of your diesel performance and off-road needs.
www.meyerperformance.com
(812)-344-4421-Tyler

Nevr2Loe · 09-04-2008, 09:02 AM

Now with Just the Injectors and Adrenaline, Do I need Head Studs? and what kind of HP Numbers would I be looking at? Sorry for all the questions, Like I said, This is my first Diesel and Im trying to do what I can do...

Nevr2Loe · 09-04-2008, 09:06 AM

Also, Will any of that Hurt my VP44? I dont have the Cash to replace that thing right now, LOL.....

***DevilDogDiesel*** · 09-04-2008, 09:07 AM

No buddy no head studs yet. With like some 100 sticks and the Adrenaline with a stock turbo I am going to guess at 380.

__________________
2000 2500 ext. cab short bed, AFE cold air intake, single 6 inch stack, high tech turbo, FASS 95, Scheid injectors, Adrenaline, HP intercooler boots, fully built trans., custom trac. bars, HAISLEY MACHINE ALL THE WAY!!

Nevr2Loe · 09-04-2008, 09:11 AM

What about the Edge Comp Box? Thats the one I was lookin at...

Nevr2Loe · 09-04-2008, 09:13 AM

Thanks Guys, I really Appreciate the Help. I have been looking at all this stuff and the truck is my Daily so I dont want anything that is going to hinder me from going, I come from a MiniTruckin Background so Im not scared to Go Big with my Daily, Just dont want anything thats gonna break my truck....

**Meyer** · 09-04-2008, 09:16 AM

With the BD lift pump you should not have any problems. And the Quadzilla Adren is lots better imo, beause you can download all sorts of tunes for your needs.

Tyler
MPF,LLC

__________________
Meyer Performance & Fabrication,LLC
Home of your diesel performance and off-road needs.
www.meyerperformance.com
(812)-344-4421-Tyler

***nick03*** · 09-04-2008, 09:21 AM

Quote:

Originally Posted by Meyer

With the BD lift pump you should not have any problems. And the Quadzilla Adren is lots better imo, beause you can download all sorts of tunes for your needs.

Tyler
MPF,LLC

you won't need headstuds until you are pushing more the 45-50psi of boost. Just watch the egt's you really don't want to run over 1400 degrees.

__________________
07 Dodge 3500 6.7 6spd Manual, Inferno Red, ProComps Extreme AT 305-65-17, AFE intake w/ torque tube. MP-8 & Edge Juice W/ Attitude! Valair New12.25" 3400# Dual Disk Ceramic/Ceramic on stock Hydro's, 10 months old w/28,500+miles. A big thank you to John at Holland Court Diesel & Dan at Valair

!

BBRam · 09-04-2008, 09:24 AM

Do you have Gauges?

__________________

03-3500, DRW, QC, 4x4, DTT Trans, Mag-Hytec, R700 BD Twins, BD IC Boots, BD Billet Flexplate, Lockup Switch, SMARTY TNT-R BETA/TS MP-8, Eliminator Fuel System, Floor It Stage 3 CP3 & Rail Cap, BIG Stix's by FTE, ARP Head Stud's, Springs, Fluidampr, ATS ARC-FLOW, AFE, Boost, Drive Pressure, Pyro, Fuel Pressure, Tran's Temp, Rail Pressure Gauge, GDP Ladder Bars, GrandRock 7" Miters. Old #'s (R/T .021, 60' 1.76, 1/4 ET 13.14 @ 100.45 mph)

09-04-2008, 08:46 AM	#1 (permalink)
Nevr2Loe Newbie Join Date: Aug 2008 Posts: 27 Nevr2Loe's Truck Pics	Trying to Make Power Hows it goin, Im new to the Diesel thing and I am trying to make some power. My goal is 800 ft lb of torque and whatever HP Number comes with that. I have a 2000 Ram 3500 Single Cab Dually 5.9L Cummins 5-Speed 2wd... Any Help yall could give would be awesome... By the way, I have a Cold air Intake, MBRP Turbo Back Exhaust, and BD Diesel Lift Pump Replacement.

09-04-2008, 08:51 AM	#3 (permalink)
*nick03* Diesel Head Join Date: Mar 2008 Location: Lakewood,CO Posts: 1,034 nick03's Truck Pics	Some injectors and a Adrenaline you should be there maybe a little over! __________________ 07 Dodge 3500 6.7 6spd Manual, Inferno Red, ProComps Extreme AT 305-65-17, AFE intake w/ torque tube. MP-8 & Edge Juice W/ Attitude! Valair New12.25" 3400# Dual Disk Ceramic/Ceramic on stock Hydro's, 10 months old w/28,500+miles. A big thank you to John at Holland Court Diesel & Dan at Valair!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Remove Advertisements Sponsored Links
Dodge Cummins Diesel Forum Advertisement

09-04-2008, 08:48 AM	#2 (permalink)
Meyer Meyer Performance & Fabrication Join Date: Apr 2008 Location: Columbus,IN Posts: 1,476 Meyer's Truck Pics	I would get a Quadzilla adrenaline it will put you very close to that then a small set or injectors, and a turbo if the temps get out of control. Tyler MPF,LLC __________________ Meyer Performance & Fabrication,LLC Home of your diesel performance and off-road needs. www.meyerperformance.com (812)-344-4421-Tyler

09-04-2008, 08:54 AM	#4 (permalink)
Meyer Meyer Performance & Fabrication Join Date: Apr 2008 Location: Columbus,IN Posts: 1,476 Meyer's Truck Pics	Ya it should be over 900 pretty easy. __________________ Meyer Performance & Fabrication,LLC Home of your diesel performance and off-road needs. www.meyerperformance.com (812)-344-4421-Tyler

09-04-2008, 09:02 AM	#5 (permalink)
Nevr2Loe Newbie Join Date: Aug 2008 Posts: 27 Nevr2Loe's Truck Pics	Now with Just the Injectors and Adrenaline, Do I need Head Studs? and what kind of HP Numbers would I be looking at? Sorry for all the questions, Like I said, This is my first Diesel and Im trying to do what I can do...

09-04-2008, 09:06 AM	#6 (permalink)
Nevr2Loe Newbie Join Date: Aug 2008 Posts: 27 Nevr2Loe's Truck Pics	Also, Will any of that Hurt my VP44? I dont have the Cash to replace that thing right now, LOL.....

09-04-2008, 09:07 AM	#7 (permalink)
*DevilDogDiesel* Cummins CrAzY Join Date: Apr 2008 Location: Marion, Indiana Posts: 706 DevilDogDiesel's Truck Pics	No buddy no head studs yet. With like some 100 sticks and the Adrenaline with a stock turbo I am going to guess at 380. __________________ 2000 2500 ext. cab short bed, AFE cold air intake, single 6 inch stack, high tech turbo, FASS 95, Scheid injectors, Adrenaline, HP intercooler boots, fully built trans., custom trac. bars, HAISLEY MACHINE ALL THE WAY!!

09-04-2008, 09:11 AM	#8 (permalink)
Nevr2Loe Newbie Join Date: Aug 2008 Posts: 27 Nevr2Loe's Truck Pics	What about the Edge Comp Box? Thats the one I was lookin at...

09-04-2008, 09:13 AM	#9 (permalink)
Nevr2Loe Newbie Join Date: Aug 2008 Posts: 27 Nevr2Loe's Truck Pics	Thanks Guys, I really Appreciate the Help. I have been looking at all this stuff and the truck is my Daily so I dont want anything that is going to hinder me from going, I come from a MiniTruckin Background so Im not scared to Go Big with my Daily, Just dont want anything thats gonna break my truck....

09-04-2008, 09:16 AM	#10 (permalink)
Meyer Meyer Performance & Fabrication Join Date: Apr 2008 Location: Columbus,IN Posts: 1,476 Meyer's Truck Pics	With the BD lift pump you should not have any problems. And the Quadzilla Adren is lots better imo, beause you can download all sorts of tunes for your needs. Tyler MPF,LLC __________________ Meyer Performance & Fabrication,LLC Home of your diesel performance and off-road needs. www.meyerperformance.com (812)-344-4421-Tyler

09-04-2008, 09:24 AM	#12 (permalink)
BBRam Super Administrator Join Date: Jan 2006 Location: Chelsea MI Posts: 16,270 BBRam's Truck Pics	Do you have Gauges? __________________ 03-3500, DRW, QC, 4x4, DTT Trans, Mag-Hytec, R700 BD Twins, BD IC Boots, BD Billet Flexplate, Lockup Switch, SMARTY TNT-R BETA/TS MP-8, Eliminator Fuel System, Floor It Stage 3 CP3 & Rail Cap, BIG Stix's by FTE, ARP Head Stud's, Springs, Fluidampr, ATS ARC-FLOW, AFE, Boost, Drive Pressure, Pyro, Fuel Pressure, Tran's Temp, Rail Pressure Gauge, GDP Ladder Bars, GrandRock 7" Miters. Old #'s (R/T .021, 60' 1.76, 1/4 ET 13.14 @ 100.45 mph)