Big twins!

TURBOLVR · 11-02-2009, 11:21 AM

Twins for sale!
Polished Turbonetics ball bearing 66/68/12 T4 w/38mm external gate over S480/83/1.10 w/race cover, HTT quickspool 3pc manifold, Huge AFE ProdryS filter, full 5" down pipe, cold pipe w/boost tap, divorced hotpipe ceramic coated and heat wrapped, bottom charger support bracket, 3rd gen style intake OR 2nd gen intake, IC pipe, SS oil feed lines, turbo drain hoses and fitting for rear drain.
These chargers spool well and make a LOT of boost fast, but are too much for my comfort. They are still on the truck and driven daily. T66 has 9k miles and the 480 has 3k both are in excellent condition. asking $3700. OBO.

__________________
'99 RAM 4x4 QC AFE

T66/S480 twins, Quad ADR, +250 stix, TUNNEL RAM intake plate

, FASS150, full 5" DUALS, BILLET AUTO from Northeast Performance ,

Last edited by TURBOLVR : 11-02-2009 at 11:23 AM.

ewatts2003 · 11-02-2009, 08:15 PM

What are you going with now? And pm me some info on how you did the breathers in the valve cover if you don't mind.

__________________
1998.5 Ram 2500 5-speed, DiPricols, ADR, S&B, 150hp Injectors, CFM+, AD 100, II 62/71/14, SBC 3250 DD, 4" MBRP, Modified DV's, BD Short Throw Soon: Water/Meth, 240's, 5" Exhaust, LED Lights

471 hp/968 tq 8/15/09 TST/EZ

TURBOLVR · 11-02-2009, 08:24 PM

prolly a 35/475 or S300G/475 or 62/475 IDK yet. This thing is an animal right now and I need to bring it back down a notch until I can afford to do it right.

The breathers are just Mr.gasket baffled VC breathers, I drilled a (1-1/4"IIRC) hole between the pushrods , smoothed the holes to protect the grommets and pressed the grommets and then the breathers in, added a couple feet of 5/8 hose to vent down past the frame/battery to the ground.

__________________
'99 RAM 4x4 QC AFE

T66/S480 twins, Quad ADR, +250 stix, TUNNEL RAM intake plate

, FASS150, full 5" DUALS, BILLET AUTO from Northeast Performance ,

S.O.B · 11-02-2009, 09:50 PM

interested in a partial trade on a big big single by any chance?

__________________
02' 2500, 24v, 5 spd, 4x4, straight 4" exhaust, 6 inch steele stacks,adren., ATS intake, Quad. monster air intake, Rp 100 fp,sbc 550hp,
THANKS ROLLIN SMOKE

TURBOLVR · 11-02-2009, 10:00 PM

I dont think I could ever run a single again! If you ever get the opportunity to drive a set like this, the boost from 1600rpm up is endless and super strong it just presses you into the seat and holds you there until you let off. It just KEEPS PULLING!
This is prolly the 8th or so set I've had on this truck and the biggest so far. Its darn impressive, but I need to tone it down a bit for a while so...

__________________
'99 RAM 4x4 QC AFE

T66/S480 twins, Quad ADR, +250 stix, TUNNEL RAM intake plate

, FASS150, full 5" DUALS, BILLET AUTO from Northeast Performance ,

flintstone · 11-03-2009, 01:22 PM

That set-up is a work of art!! Like many of us, I'm about 2 grand short though. Bump for ya, just the same.

__________________
1998.5 3500 dually.S300,AIRDOG 150, S&B INTAKE,JUICE W/ATTITUDE, 5" RSD w/ 6" MBRP tip, FLEXALITE, BILLET T.C. H.D. REBUILT TRANS, HAISLEY STUDS & O RINGS, 100 HP STICKS, Hopelessly Addicted

[][]==o==[][]

Dodgessmoke · 11-03-2009, 01:24 PM

awesome lookin! bump for ya!

__________________
05 3500 6 spd Blacked out, 750 hp South Bend dual disk competition clutch, HOT Edge Juice w/attitude, Airdog 150, AFE stage 2 intake, 4" turbo back to 8" single black stack, KORE leveling kit, stock wheels on 35" Mud Grapplers

olddodgetruck · 11-03-2009, 08:35 PM

i think you should just run em carl,whats the worst thing that can happen crack a cylinder.

__________________
99 rusty doors balanced engine s362/3b twins,ats manifold,drag comp,mach7 sticks,fass 150,pdr cam,o-ringed head, h-11 studs,dtt tranny,garmon vb, 6'' stacks,bald rear tires and a monster pump on the way

TURBOLVR · 11-03-2009, 08:43 PM

HA HA! I am running them, until I do something else.

__________________
'99 RAM 4x4 QC AFE

T66/S480 twins, Quad ADR, +250 stix, TUNNEL RAM intake plate

, FASS150, full 5" DUALS, BILLET AUTO from Northeast Performance ,

***stevewes2004*** · 11-04-2009, 07:46 AM

bump b/c they're purdy

01Grizzly · 11-04-2009, 02:31 PM

interested in a partial trade on a 40? 40 only has about 3000 miles on it.

__________________
Kyle2001 Dodge 2500 Cummins HX40, 150 Sticks, BHAF, Fass 150, Edge Drag Comp, Dual 6 in. Miter Cuts, Gauges, Billet Input, Billet Output, ATS Triple Disk, Valve Body, Deep Dish Pan, Clutches, Shift Kit, and alot of electronics that I don't want anymore

powermad · 11-04-2009, 05:36 PM

so i need to block this thread because if i keep looking at those twins im gonna end up 3800 bucks in dept! lol

__________________
MY TRUCKS FOR SALE!2001.5 cummins sport SOVP44 afe stage 2, edge comp, 200hp injectors, silver bullet 66/74/14 and a built tranny with goerend and bd internals.
http://www.youtube.com/user/powermad2001

11-02-2009, 11:21 AM	#1 (permalink)
TURBOLVR Diesel Freak Join Date: Jun 2007 Location: Thompson, CT. Posts: 563 Thanks: 9 Thanked 23 Times in 20 Posts TURBOLVR's Truck Pics	Big twins! Twins for sale! Polished Turbonetics ball bearing 66/68/12 T4 w/38mm external gate over S480/83/1.10 w/race cover, HTT quickspool 3pc manifold, Huge AFE ProdryS filter, full 5" down pipe, cold pipe w/boost tap, divorced hotpipe ceramic coated and heat wrapped, bottom charger support bracket, 3rd gen style intake OR 2nd gen intake, IC pipe, SS oil feed lines, turbo drain hoses and fitting for rear drain. These chargers spool well and make a LOT of boost fast, but are too much for my comfort. They are still on the truck and driven daily. T66 has 9k miles and the 480 has 3k both are in excellent condition. asking $3700. OBO. __________________ '99 RAM 4x4 QC AFE T66/S480 twins, Quad ADR, +250 stix, TUNNEL RAM intake plate , FASS150, full 5" DUALS, BILLET AUTO from Northeast Performance , Last edited by TURBOLVR : 11-02-2009 at 11:23 AM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Remove Advertisements Sponsored Links
Dodge Cummins Diesel Forum Advertisement

11-02-2009, 08:15 PM	#2 (permalink)
ewatts2003 Diesel Freak Join Date: Jul 2006 Location: Blair, NE Posts: 685 Thanks: 9 Thanked 8 Times in 8 Posts ewatts2003's Truck Pics	What are you going with now? And pm me some info on how you did the breathers in the valve cover if you don't mind. __________________ 1998.5 Ram 2500 5-speed, DiPricols, ADR, S&B, 150hp Injectors, CFM+, AD 100, II 62/71/14, SBC 3250 DD, 4" MBRP, Modified DV's, BD Short Throw Soon: Water/Meth, 240's, 5" Exhaust, LED Lights 471 hp/968 tq 8/15/09 TST/EZ

11-02-2009, 08:24 PM	#3 (permalink)
TURBOLVR Diesel Freak Join Date: Jun 2007 Location: Thompson, CT. Posts: 563 Thanks: 9 Thanked 23 Times in 20 Posts TURBOLVR's Truck Pics	prolly a 35/475 or S300G/475 or 62/475 IDK yet. This thing is an animal right now and I need to bring it back down a notch until I can afford to do it right. The breathers are just Mr.gasket baffled VC breathers, I drilled a (1-1/4"IIRC) hole between the pushrods , smoothed the holes to protect the grommets and pressed the grommets and then the breathers in, added a couple feet of 5/8 hose to vent down past the frame/battery to the ground. __________________ '99 RAM 4x4 QC AFE T66/S480 twins, Quad ADR, +250 stix, TUNNEL RAM intake plate , FASS150, full 5" DUALS, BILLET AUTO from Northeast Performance ,

11-02-2009, 09:50 PM	#4 (permalink)
S.O.B Cummins Enthusiast Join Date: Jun 2008 Location: South Texas Posts: 226 Thanks: 1 Thanked 0 Times in 0 Posts S.O.B's Truck Pics	interested in a partial trade on a big big single by any chance? __________________ 02' 2500, 24v, 5 spd, 4x4, straight 4" exhaust, 6 inch steele stacks,adren., ATS intake, Quad. monster air intake, Rp 100 fp,sbc 550hp, THANKS ROLLIN SMOKE

11-02-2009, 10:00 PM	#5 (permalink)
TURBOLVR Diesel Freak Join Date: Jun 2007 Location: Thompson, CT. Posts: 563 Thanks: 9 Thanked 23 Times in 20 Posts TURBOLVR's Truck Pics	I dont think I could ever run a single again! If you ever get the opportunity to drive a set like this, the boost from 1600rpm up is endless and super strong it just presses you into the seat and holds you there until you let off. It just KEEPS PULLING! This is prolly the 8th or so set I've had on this truck and the biggest so far. Its darn impressive, but I need to tone it down a bit for a while so... __________________ '99 RAM 4x4 QC AFE T66/S480 twins, Quad ADR, +250 stix, TUNNEL RAM intake plate , FASS150, full 5" DUALS, BILLET AUTO from Northeast Performance ,

11-03-2009, 01:22 PM	#6 (permalink)
flintstone Cummins Enthusiast Join Date: Oct 2008 Location: flint, MI Posts: 298 Thanks: 112 Thanked 1 Time in 1 Post flintstone's Truck Pics	That set-up is a work of art!! Like many of us, I'm about 2 grand short though. Bump for ya, just the same. __________________ 1998.5 3500 dually.S300,AIRDOG 150, S&B INTAKE,JUICE W/ATTITUDE, 5" RSD w/ 6" MBRP tip, FLEXALITE, BILLET T.C. H.D. REBUILT TRANS, HAISLEY STUDS & O RINGS, 100 HP STICKS, Hopelessly Addicted [][]==o==[][]

11-03-2009, 01:24 PM	#7 (permalink)
Dodgessmoke Diesel Freak Join Date: Dec 2008 Posts: 655 Thanks: 0 Thanked 9 Times in 8 Posts Dodgessmoke's Truck Pics	awesome lookin! bump for ya! __________________ 05 3500 6 spd Blacked out, 750 hp South Bend dual disk competition clutch, HOT Edge Juice w/attitude, Airdog 150, AFE stage 2 intake, 4" turbo back to 8" single black stack, KORE leveling kit, stock wheels on 35" Mud Grapplers

11-03-2009, 08:35 PM	#8 (permalink)
olddodgetruck Newbie Join Date: May 2008 Location: foster RI Posts: 9 Thanks: 0 Thanked 0 Times in 0 Posts olddodgetruck's Truck Pics	i think you should just run em carl,whats the worst thing that can happen crack a cylinder. __________________ 99 rusty doors balanced engine s362/3b twins,ats manifold,drag comp,mach7 sticks,fass 150,pdr cam,o-ringed head, h-11 studs,dtt tranny,garmon vb, 6'' stacks,bald rear tires and a monster pump on the way

11-03-2009, 08:43 PM	#9 (permalink)
TURBOLVR Diesel Freak Join Date: Jun 2007 Location: Thompson, CT. Posts: 563 Thanks: 9 Thanked 23 Times in 20 Posts TURBOLVR's Truck Pics	HA HA! I am running them, until I do something else. __________________ '99 RAM 4x4 QC AFE T66/S480 twins, Quad ADR, +250 stix, TUNNEL RAM intake plate , FASS150, full 5" DUALS, BILLET AUTO from Northeast Performance ,

11-04-2009, 07:46 AM	#10 (permalink)
*stevewes2004* Carolina Coal Rollers Join Date: Jun 2008 Location: Concord, NC Posts: 635 Thanks: 13 Thanked 10 Times in 8 Posts stevewes2004's Truck Pics	bump b/c they're purdy __________________ 2002 6spd H.O. Drag Comp \| DDP 200s \| HE351/HT3B Twins IN PROGRESS \| 5" Ex. \| ISSPRO Guages \| Leveled=325/60/18 \| Raptor 100 \| SB Hydros \| SB Con OFE http://www.gorowan.com/2002ram/

11-04-2009, 02:31 PM	#11 (permalink)
01Grizzly Cummins Nut Join Date: Oct 2008 Location: Marion,Ohio Posts: 419 Thanks: 6 Thanked 3 Times in 3 Posts 01Grizzly's Truck Pics	interested in a partial trade on a 40? 40 only has about 3000 miles on it. __________________ Kyle2001 Dodge 2500 Cummins HX40, 150 Sticks, BHAF, Fass 150, Edge Drag Comp, Dual 6 in. Miter Cuts, Gauges, Billet Input, Billet Output, ATS Triple Disk, Valve Body, Deep Dish Pan, Clutches, Shift Kit, and alot of electronics that I don't want anymore

11-04-2009, 05:36 PM	#12 (permalink)
powermad Diesel Freak Join Date: Feb 2008 Location: east bay Posts: 996 Thanks: 19 Thanked 52 Times in 33 Posts powermad's Truck Pics	so i need to block this thread because if i keep looking at those twins im gonna end up 3800 bucks in dept! lol __________________ MY TRUCKS FOR SALE!2001.5 cummins sport SOVP44 afe stage 2, edge comp, 200hp injectors, silver bullet 66/74/14 and a built tranny with goerend and bd internals. http://www.youtube.com/user/powermad2001