Dodge-Cummins Items

[Rock-Hard]

I have a RV275 5.9 Cummins Diesel engine that fits a 98.5 to 2002 Dodge 2500 or 3500. This is a higher horse power version of the standard truck engine. It has approximately 35,000 miles on it. Everything under the hood can go with it, radiator,air-to-air cooler, everything. 2700.00 for the engine and anything under the hood you need. The engine was 9600.00 2 years ago when I bought it. This is a 275 HP 680 Lb Torque Engine out of the box with no mods.

Pretty nice electric Leather seats for same model year of Dodges, except seats will fit 1500's too. Charcoal gray. 700.00

Rear chrome stock bumper/heavy duty class IV hitch 400.00

Cooper 315 tires on Mickey Thompson Classic 2's 8 lug wheels 500.00

EDGE COMP Box Fits 98.5 to 2000 Dodge Cummins--300.00

---

Last edited by Rock-Hard : 10-18-2009 at 09:06 PM.

[Jerridcummins]

willing to sell just the injectors?

__________________
2001 6spd, power puck, AFE intake, 7" CAT stack, 4 1/2 lift, 35" toyo mt's, phantom 2 boost and EGT guages, boost elbo, silencer ring GONE!, BD lift pump, THE S.O.L.I.D CREW!

[cajflynn]

I want the injectors. Please call me at 303-570-4325. I am ready to pay today.

__________________
2001 qdcb, 4" mbrp, smarty, F1 stage 2, j-hook, k&n, 3 disk tc(400 under stock), 373 gears, ats co-pilot, pacbrake, 3rd gen Brake, mag hytec diff-trans-oil, currently 737k miles

[Rock-Hard]

PM's sent to both of you.

[Rock-Hard]

I also have the front & rear stock driveshafts available. Make a reasonable offer.

[farmboy458]

sell just the wheels?

__________________
99 24v extended cab..fass fuel system..4inch exhaust turbo back..k&n cold air intake....edge comp box...80 rear with detroit tru-trac/auto meter phantom 2 pyro and boost guage/sout bend 3250 12cb /new nv4500\ddp110's\431hp and 986tq on hurckstorf dyno DUKE

[texas503]

Would you be willing to take $250 shipped for the comp box? Asking for a buddy of mine.

__________________
'99 quad cab LWB 2500 auto w/shift kit, silencer ring MIA, Edge Comp hooked as EZ, B&W turnover, BHAF, Isspro mechanical FP and boost gauges; Airdog 100; DTT noise filter

[texas503]

Do you have a FASS or Airdog fuel system you want to sell?

__________________
'99 quad cab LWB 2500 auto w/shift kit, silencer ring MIA, Edge Comp hooked as EZ, B&W turnover, BHAF, Isspro mechanical FP and boost gauges; Airdog 100; DTT noise filter

[Rock-Hard]

Originally Posted by texas503

Do you have a FASS or Airdog fuel system you want to sell?

Tex I have always used a 4601 HP pump with half inch fuel line. I have the AN fittings with hose barbs nthat replace the banjo bolts. I still have about 3 or 4 of these fittings NEW that I never had to use. Changing the fuel line size is probably the single biggest improvement I made on my truck. It reduced changing the LP's from once a year to like once in 4 years I think. I haven't had to replace the VP44 since changing the fuel line size.

[RattleBox]

Is the coolant overflow tank good?

__________________
'01 2500 Quad Cab 4X4 5 Spd, Flatbed, AirDog 150, FBD 5" Straight Pipe, Silencer ring M.I.A. "If it don't blow black, Take It Back!

[Rock-Hard]

Originally Posted by RattleBox

Is the coolant overflow tank good?

YES it is....

[aerolithe]

could you send a pictures of those seats>
If the rear seat included also?
Thanks

__________________
short wheel, air dog 100, engine stock, 4x4, automatic, quad cab