- HOME - FORUMS - GARAGE - TECH - ARTICLES - CHAT - CLASSIFIEDS - REVIEWS - VIDEOS - MEMBER MAP - STORE -
- REGISTER - CALENDAR - INFO - SITE HELP - RULES - STAFF - MEMBERSHIP - CONTACT US -


Welcome to the Dodge Cummins Diesel Forum, the fastest growing Dodge Diesel Community on the internet.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact contact us

Go Back   Dodge Cummins Diesel Forum > Technical Articles - Writeups - Guides Section > 94-98 Tech Articles
Register Forums FAQ Members List Calendar Active Topics Mark Forums Read

94-98 Tech Articles Tech Articles for the 94-98 12V Dodge Cummins Diesel...NO ADVERTISING

 


Reply
 
LinkBack Thread Tools Display Modes
Old 03-29-2009, 06:14 PM   #1 (permalink)
Cummins Fanatic
 
96_cumminsPower's Avatar
 
Join Date: Oct 2008
Location: Fort Collins, CO..Rocksprings, WY
Posts: 154
Thanks: 1
Thanked 1 Time in 1 Post
2nd gen engine specs 1996-1998 12v

finally did some more research and got the rest of the 2nd generation 12v specs, so hope now you know more bout your 96-98 12v cummins engine



Power (SAE net)

215 bhp @ 2600 rpm - 49 state manual
180 bhp @ 2500 rpm - all auto. trans
180 bhp @ 2500 rpm - CA man. trans

Torque (SAE net)

440 lb-ft @ 1600 rpm - 49 state manual
420 lb-ft @ 1500 rpm - all auto. trans
420 lb-ft @ 1500 rpm - CA man. trans

Compression Ratio: 17.5:1



Engine: 5.9-Liter, OHV, Diesel Six-Cylinder
Type & Description: Six cylinder, in line, liquid cooled, turbocharged, intercooled
Displacement: 359 cu. in. (5.9 L)
Bore x Stroke: 4.02 x 4.72 (102.1 x 119.9)
Valve System: OHV, 12 valves, solid sliding tappet lifter/followers
Valve Adjustment (engine cold)
Intake = 0.010" Exhaust = 0.020"
Adjustment interval - 24,000 miles
Fuel Injection: High-pressure direct injection, mechanical
Fuel Pressure: 18-24 psi at idle, 28-36 at 2000 rpm with no load.
Construction: Cast iron block & head
Fuel Requirement: Diesel #1 or #2
Oil Capacity: 11 qt. (10.4 L) with filter
Oil Flow Rate: 20 GPM
Coolant Capacity: 24 qt. (22.7 L)
Emission Controls: Engine modifications, oxidation catalyst (after 1/1/94)
Alternator: 136 A
Battery: Maintenance-free, dual 750 CCA


94-98 Valve Specs

seat angle(degree) = 30

face angle(degree) = 45

spring test pressure(lbs.@in.) = 81@1.64

spring installed height(in.) = 2.36

stem-to-guide clearance(in)
intake = 0.002-
exhaust = 0.006

stem diameter(in.)
intake = 0.313
0.314
exhaust = 0.313
0.314

Ram Diesel Turbocharger Specifications

1996-1988 engine:160, 175, 180 HP max boost:15-18 psi turbocharger: Holset HX35W 12 sq cm turbine housing
1996-1998 engine: 215HP max boost: 21-23 psi turbocharger: Holset HX35W 12 sq cm turbine housing

Pyro Probe Location l Max Temp At Rated Power l

ehaust manifold = 1250 Degrees F

exhaust elbow = 950 Degrees F
__________________
got all mods an perform. parts planned out 4 the 12v
1982 Camaro..350..4spd manual..runnin straight headers
96_cumminsPower is offline   Reply With Quote
Sponsored Links
Advertisement
 
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -4. The time now is 11:10 PM.

Powered by vBulletin® Version 3.6.8
Copyright ©2000 - 2009, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.1.0
vB.Sponsors