- HOME - FORUMS - GARAGE - TECH - ARTICLES - CHAT - CLASSIFIEDS - REVIEWS - VIDEOS - MEMBER MAP - STORE -
- REGISTER - CALENDAR - INFO - SITE HELP - RULES - STAFF - MEMBERSHIP - CONTACT US -


Welcome to the Dodge Cummins Diesel Forum, the fastest growing Dodge Diesel Community on the internet.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact contact us

Go Back   Dodge Cummins Diesel Forum > Technical Articles - Writeups - Guides Section > 94-98 Tech Articles
Register Forums FAQ Members List Calendar Active Topics Mark Forums Read

94-98 Tech Articles Tech Articles for the 94-98 12V Dodge Cummins Diesel...NO ADVERTISING

 


Reply
 
LinkBack Thread Tools Display Modes
Old 12-30-2008, 03:37 AM   #1 (permalink)
Cummins Fanatic
 
96_cumminsPower's Avatar
 
Join Date: Oct 2008
Location: Fort Collins, CO..Rocksprings, WY
Posts: 154
Thanks: 1
Thanked 1 Time in 1 Post
2nd gen engine specs 94-95

Did some research on internet and threw manuals..hope this helps any...or at least educates you bout your 94-95 12v cummins engine


For 94-95 manual cummins

Compression Ratio: 17.5:1
Power: 175 bhp @ 2500 rpm
Torque: 420 lb-ft @ 1500 rpm
BHP/Liter: 29.7
Max. Engine Speed (Governed Speed*) : 2700 rpm
Max. No Load High Idle Engine Speed: 3000 RPM

For 94-95 automatic cummins

Compression Ratio: 17.5:1
Power: 160 bhp @ 2500 rpm
Torque: 400 lb-ft @ 1500 rpm
BHP/Liter: 27.1
Max. Engine Speed (Governed Speed*) : 2700 rpm
Max. No Load High Idle Engine Speed: 3000 RPM

1994/1995 12 Valve General Engine Specifications

Engine: 5.9-Liter, OHV, Diesel Six-Cylinder
Type & Description: Six cylinder, in line, liquid cooled, turbocharged, intercooled
Displacement: 359 cu. in. (5.9 L)
Bore x Stroke: 4.02 x 4.72 (102.1 x 119.9)
Valve System: OHV, 12 valves, solid sliding tappet lifter/followers
Valve Adjustment (engine cold)
Intake = 0.010" Exhaust = 0.020"
Adjustment interval - 24,000 miles
Fuel Injection: Bosch P7100 High-pressure direct injection, mechanical
Fuel Pressure: 18-24 psi at idle, 28-36 at 2000 rpm with no load.
Max Fuel Pressure drop accross filter: 5 psi
Max allowable fuel return line restriction : 20.4" Hg
Maximum Inlet Restriction to fuel transfer pump: 4" Hg
Construction: Cast iron block & head
Fuel Requirement: Diesel #1 or #2
Oil Capacity 1994: 10 qt. (9.5 L) with filter
11 quarts using Cummins p/n 3928740 or Dodge p/n 4796874 dipstick
11 qts by marking the dipstick 1 3/16" above the "ADD" mark
Oil Capacity 1995: 11 qt. (10.4 L) with filter
Oil Flow Rate: 20 GPM
Minimum Oil Pressure @ Idle: 10 psi
Minimum Oil Pressure @ Rated: 30 psi
Regulated Oil Pressure: 65 psi
Oil Filter Bypass Diff. Pressure: 20 psi
Coolant Capacity: 24 qt. (22.7 L)
Emission Controls: Engine modifications, oxidation catalyst (after 1/1/94)
Alternator: 120 A
Battery: Maintenance-free, dual 750 CCA


Ram Diesel Turbocharger Specifications

1994 160, 175 HP 15-18 psi Holset WH1C 12 sq cm turbine housing
1995 160, 175, 180 HP 15-18 psi Holset HX35W 12 sq cm turbine housing

Pyro Probe Location l Max Temp At Rated Power l

ehaust manifold = 1250 Degrees F

exhaust elbow = 950 Degrees F
__________________
got all mods an perform. parts planned out 4 the 12v
1982 Camaro..350..4spd manual..runnin straight headers
96_cumminsPower is offline   Reply With Quote
The Following User Says Thank You to 96_cumminsPower For This Useful Post:
stuntjake (08-06-2009)
Sponsored Links
Advertisement
 
Old 12-30-2008, 03:41 AM   #2 (permalink)
Cummins Fanatic
 
96_cumminsPower's Avatar
 
Join Date: Oct 2008
Location: Fort Collins, CO..Rocksprings, WY
Posts: 154
Thanks: 1
Thanked 1 Time in 1 Post
also found this to be interesting....enjoy


94-98 12 Valve Recommended Fuel

Diesel no 2 minimum cetane rating
40 for temp above 32 degrees F
45 for temp below 32 degrees F
45 with prolonged heavy loads (towing, max GVWR, etc)
Acceptable emergency alternative fuels for 1994 & later 12 Valve trucks:
#1 and #2 Diesel
1K and 2K Kerosene
Jet -A, Jet A-1, JP-5, JP-8
NOT Acceptable
Jet-B, JP-4, Cite
__________________
got all mods an perform. parts planned out 4 the 12v
1982 Camaro..350..4spd manual..runnin straight headers
96_cumminsPower is offline   Reply With Quote
Old 12-30-2008, 04:48 AM   #3 (permalink)
Cummins Junky
 
tdcummins's Avatar
 
Join Date: Aug 2008
Location: Evans, Colorado a.k.a Kansas with a view.
Posts: 306
Thanks: 14
Thanked 4 Times in 4 Posts
Smile

Very nice thread man! Looks like you have done a little home work!
__________________
2002 CTD LWB EXTC, T409 Motoblue 4" exhaust, Auto meter gauges(Boost, Tranny, lift pump, & EGT),Smarty SO3 Programmer, FASS 150/95
tdcummins is offline   Reply With Quote
Sponsored Links
Advertisement
 
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -4. The time now is 07:28 AM.

Powered by vBulletin® Version 3.6.8
Copyright ©2000 - 2009, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.1.0
vB.Sponsors