94 cummins motor parts for sale

[jason]

Originally Posted by SmokinRamMike

How about the transmission kick down cable from the pump?

Sorry, no kickdown cable. Plenty of other stuff though.

__________________
2000,4x4, quad, 315procompAT's, XZT+ to big hoss level 5,banks high ram,banks wastegate,100hp injectors,4"tbe,TAG,ranch hand bull nose,leveling kit, auto with hughes perf. TC and VB,pillar gauges- trans,pyro,boost,fuel press, BHAF, 2 LP's @28psi

[jason]

Originally Posted by weldmachine

if its an auto i need the wiring harness, i also need the pasenger side intercooler boot attached to the intercooler, i also need the throttle position sensor, and fuel shut off solenoid

I do have the intercooler boot for the pass. side. I'll have to check if it is the one for the turbo or the intercooler. I sold the wiring harness and the fuel shut off solenoid went with the pump. I'll check on the boot for ya.

__________________
2000,4x4, quad, 315procompAT's, XZT+ to big hoss level 5,banks high ram,banks wastegate,100hp injectors,4"tbe,TAG,ranch hand bull nose,leveling kit, auto with hughes perf. TC and VB,pillar gauges- trans,pyro,boost,fuel press, BHAF, 2 LP's @28psi

[smokie07]

do you have the pump brackets, throttle linkage pump oil line or throttle cable?

__________________
98 24v flatbed straight pipe air inrake after market clutch

[jason]

Originally Posted by smokie07

do you have the pump brackets, throttle linkage pump oil line or throttle cable?

The pump oil line, is it braided stainless with a female threaded connection on each side? If so I have that, I'll check tomorrow on the rest of the stuff.

__________________
2000,4x4, quad, 315procompAT's, XZT+ to big hoss level 5,banks high ram,banks wastegate,100hp injectors,4"tbe,TAG,ranch hand bull nose,leveling kit, auto with hughes perf. TC and VB,pillar gauges- trans,pyro,boost,fuel press, BHAF, 2 LP's @28psi

[smokie07]

yeah i think thats it and did you figure out if you had the other stuff

__________________
98 24v flatbed straight pipe air inrake after market clutch

[jason]

Originally Posted by smokie07

yeah i think thats it and did you figure out if you had the other stuff

I looked and all I found was the steel braided line with the threaded ends. Give me your zip so I can see about shipping.

__________________
2000,4x4, quad, 315procompAT's, XZT+ to big hoss level 5,banks high ram,banks wastegate,100hp injectors,4"tbe,TAG,ranch hand bull nose,leveling kit, auto with hughes perf. TC and VB,pillar gauges- trans,pyro,boost,fuel press, BHAF, 2 LP's @28psi