Died!!! - Page 2

r_anderson65 · 07-11-2008, 11:43 AM

I talked to banks and ith hooks in after the cumputer so it leaves no trace. And doesnt effect the lift pump at all. So i answered my own question. And i do have free towing so that is a go

__________________
Robert Anderson-04.5 Qc/Sb 4x4 9" Lift, 37's on 18's, Mag Hytec Covers,Full Synthetics Everywhere, S&B CAI, 4" Banks Exhaust, Banks 6 Gun w/PDA

***05sltcummins*** · 07-11-2008, 01:00 PM

just take the chip off the truck be for it go's in trust me

__________________
2005 2500 QC 2wd lwb
afe stage 2,silencer ring MIA,muffler MIA,kitty Mia boost,pryo, trans temp,bdtd,boost fooler ,circle d trans

07cumminsdodge · 07-11-2008, 01:42 PM

i had some tranny troubles and took to dealer for warranty, had no troubles at all with dealer and i left my banks six gun on the truck.

__________________
07 5.9 2500 4x4,qc,48re smarty revo, banks six gun,banks 4 in. exhaust,isspro pyro, boost, trans temp,no cat,no silencer,aem torque tube,modified air box,suncoast tc & vb, maghitech trans pan, more to come

**patracy** · 07-11-2008, 02:10 PM

Quote:

Originally Posted by r_anderson65

Does a chip effect anything with the lift pump??

Chips/programmers do not increase voltage to the pump or increase the lift pumps pressure. The only thing a chip/programmer can do (indirectly) to a lift pump is require more of it. When chips increase the power of the engine from the IP, the IP needs more fuel.

__________________
1999 2500 4x4 Club Cab Sport. ADRENALINE/pulse , BHAF, FBD 150 sticks, full set of gauges, FP light, Holley Blue pump, 1/2" big line kit, Draw straw, 3" glasspack, TC lockup switch, Stealth VP plate, Heated WVO setup, poor man's 'pane setup, BD TC, BD VB, Billet input, Derale pan.
Parts to come: turbo and bigger exhaust, both seriously needed now!

r_anderson65 · 07-11-2008, 03:01 PM

I called banks and none of the chips change or do anything to effect the lift pump and he said it wont show on the computer so i ripped out the banks and the cai but in the stocker and the flat bed comes to pick me up tommorrow.

__________________
Robert Anderson-04.5 Qc/Sb 4x4 9" Lift, 37's on 18's, Mag Hytec Covers,Full Synthetics Everywhere, S&B CAI, 4" Banks Exhaust, Banks 6 Gun w/PDA

r_anderson65 · 07-11-2008, 03:03 PM

Yea now its totally dead. Fuel gauge doesnt budge and it doesnt even try to start up, it just keeps on cranking....and cranking

Well the work on it monday so well see

__________________
Robert Anderson-04.5 Qc/Sb 4x4 9" Lift, 37's on 18's, Mag Hytec Covers,Full Synthetics Everywhere, S&B CAI, 4" Banks Exhaust, Banks 6 Gun w/PDA

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

07-11-2008, 11:43 AM	#13 (permalink)
r_anderson65 Cummins Nut Join Date: Aug 2007 Posts: 421 r_anderson65's Truck Pics	I talked to banks and ith hooks in after the cumputer so it leaves no trace. And doesnt effect the lift pump at all. So i answered my own question. And i do have free towing so that is a go __________________ Robert Anderson-04.5 Qc/Sb 4x4 9" Lift, 37's on 18's, Mag Hytec Covers,Full Synthetics Everywhere, S&B CAI, 4" Banks Exhaust, Banks 6 Gun w/PDA

Remove Advertisements Sponsored Links
Dodge Cummins Diesel Forum Advertisement

07-11-2008, 01:00 PM	#14 (permalink)
*05sltcummins* DIESEL FREAK Join Date: Jan 2008 Location: spring,tx Posts: 134 05sltcummins's Truck Pics	just take the chip off the truck be for it go's in trust me __________________ 2005 2500 QC 2wd lwb afe stage 2,silencer ring MIA,muffler MIA,kitty Mia boost,pryo, trans temp,bdtd,boost fooler ,circle d trans

07-11-2008, 01:42 PM	#15 (permalink)
07cumminsdodge Cummins Fan Join Date: Apr 2008 Location: BRASELTON, GA. Posts: 73 07cumminsdodge's Truck Pics	i had some tranny troubles and took to dealer for warranty, had no troubles at all with dealer and i left my banks six gun on the truck. __________________ 07 5.9 2500 4x4,qc,48re smarty revo, banks six gun,banks 4 in. exhaust,isspro pyro, boost, trans temp,no cat,no silencer,aem torque tube,modified air box,suncoast tc & vb, maghitech trans pan, more to come

07-11-2008, 03:01 PM	#17 (permalink)
r_anderson65 Cummins Nut Join Date: Aug 2007 Posts: 421 r_anderson65's Truck Pics	I called banks and none of the chips change or do anything to effect the lift pump and he said it wont show on the computer so i ripped out the banks and the cai but in the stocker and the flat bed comes to pick me up tommorrow. __________________ Robert Anderson-04.5 Qc/Sb 4x4 9" Lift, 37's on 18's, Mag Hytec Covers,Full Synthetics Everywhere, S&B CAI, 4" Banks Exhaust, Banks 6 Gun w/PDA

07-11-2008, 03:03 PM	#18 (permalink)
r_anderson65 Cummins Nut Join Date: Aug 2007 Posts: 421 r_anderson65's Truck Pics	Yea now its totally dead. Fuel gauge doesnt budge and it doesnt even try to start up, it just keeps on cranking....and cranking Well the work on it monday so well see __________________ Robert Anderson-04.5 Qc/Sb 4x4 9" Lift, 37's on 18's, Mag Hytec Covers,Full Synthetics Everywhere, S&B CAI, 4" Banks Exhaust, Banks 6 Gun w/PDA