3 gauge pod pillar

[NITROUSC5]

does anyone even make these, I could only find single and double pods. How do you guys mount your gauges?

[Lake Murray Viper]

Banks has full A-pillar replacements for 3

Banks Power | Instrumentation Mountings >> Pillar-mount Consoles - Dodge Truck

__________________
2007 RAM 3500 SRW QC SB 4X4, Banks monster exhaust, Edge HOT juice w/ attitude, Go Rhino Dominator III bars...future mods ahead

[NITROUSC5]

do they make them for a 91?

[Lake Murray Viper]

Originally Posted by NITROUSC5

do they make them for a 91?

I would assume they do but you can call and ask 800-601-8072

__________________
2007 RAM 3500 SRW QC SB 4X4, Banks monster exhaust, Edge HOT juice w/ attitude, Go Rhino Dominator III bars...future mods ahead

[wjones]

I've never seen a triple for a first gen other than a double and a single someone put together.

__________________
1991.0 W250, 727
1992 W250, Getrag Club Cab

[Begle1]

Nobody makes one, as far as I've ever heard of seen in the last 5 years of following 1st gen performance.

__________________
1990 D-250 Regular Cab: Full power screw; stout TC and A518 w/ manual valve body; ratchet shifter; piston LP; Ramcharger tank; manual off; computer-programmable 40 GPH water/meth fumigation; gauges

[winkdemon84]

do there make a daul pod ??? and if so were canu get one

__________________
1993 hot rod standard 4x4,1993 auto stock 4x4,1993 1 ton standard 4x4,
1992 standard 2wd ,1993 standard 4x4 body beat off !!!looking for a ve pump for core !!

[Gatekeeper]

Summit sells the Autometer 2 pod a-pillar mount. I bought mine a few months back.

__________________
90 250 2wd auto Bone Stock.

[Paccool]

I have a dual pod. Don't remember where I got it though!

__________________
Stan

93 D250, PDR Twins HX35&HT3B, 60+# boost,PDR stage 2 head w/o-rings, PDR Cam, modified VE Pump, piston style lift pump, modified 5" intake w/AFE, ATS ported manifold,DTT 89% converter, 4" RIP exhaust, modified tranny, EGT/boost/tranny/tach gauges, TPS removed, a little chrome under the hood. Mag-Hitec tranny and diff. covers. Rear sway bar. Line-x bed liner, after market seats. Front end rebuilt with new springs - 2 " taller now. Single stage Water/Meth system installed. Oversized intercooler w/3" IC lines.

05 Chevy 2500 HD, Duramax W/Allison, 17" Hummer wheels w/285-70-17 BFG's, modified air box, ported turbo mouthpiece. Predator programmer.

[92 smokin blacky]

I have an Autometer Dual pillar pod, i got it from PDR... 2 gauges is all you really need, pyro, and boost, unless your producin some serious horsepower... and then you could put in more gauges i guess, like fuel pressure, trans temp and a tach i guess would be pretty nice to have, I've seen some dash mounts but don't remember where i saw them...so you could get the dual pillar pod and some dash mounts if you need that many gauges

__________________
Black 92' Cummins, Intercooled, auto, Bully Dog fuel pin with washer removed, Full Power screw: around 2 turns, smoke screw:3 1/4 turns, AFC Starwheel:almost 1/2 turn, stock turbo and injectors for now, straight piped, ASA Modified cold air intake with AFE filter, Isspro boost and pyro gauges, Trail Mark M/S Radial tires, 229K and rollin...

[kgeiger81]

The only ones I have seen are the dual and single pods. I know that Autometer makes one and I believe summitracing.com carries them.

__________________
"Squeaky"
ACDC
'07 2500 5.9L, K&N intake, Magnaflow exhaust, Cat and silencer ring MIA,
Autometer Phantom II's, Bully Dog Triple Dog, B&W Turnover Ball
My old truck: 1999 Dodge 2500 CTD Click here to go to my myspace page



ACDC

[Begle1]

I got my dual from Summit.

__________________
1990 D-250 Regular Cab: Full power screw; stout TC and A518 w/ manual valve body; ratchet shifter; piston LP; Ramcharger tank; manual off; computer-programmable 40 GPH water/meth fumigation; gauges