Dodge Cummins Diesel Forum - View Single Post

Electric_Cowboy · 07-13-2008, 07:12 PM

I went through Transmission Exchange down off of MLK in Portland. I got a whole rebuild kit with the Red Alto Eagle clutches, a new heavy duty trans cooler, a low stall single disc TC, and Transgo shift kit for $1250.

Then it took me about a week to rebuild it in my garage. Runs great, the only thing I'd recommend is to go ahead and buy yourself a governor pressure solenoid and sensor, and if you think that your lock up solenoids might be on the way out get them too.

My lock up solenoids are fine but within the last 150 miles noticed that it was shifting a little weird, but I attribute that to my gov solenoid going out, or the sensor; so I plan on replacing them both within the week or so.

__________________
Chris -99 2500 Ext. Cab, 5" Straight pipe, 2 piece exhaust manifold, Smarty S03-REVO, TC lockup switch, Rebuilt 47RE by Me with goodies, Silencer M.I.A., Weld Typhoons, Jammer Stage 1's, BHAF, Gauges.

COUNTRY BOY CAN SURVIVE!

Last edited by Electric_Cowboy : 07-13-2008 at 07:18 PM.

07-13-2008, 07:12 PM	#6 (permalink)
Electric_Cowboy Cummins Fanatic Join Date: Nov 2007 Location: Bethany, OR Posts: 143 Electric_Cowboy's Truck Pics	I went through Transmission Exchange down off of MLK in Portland. I got a whole rebuild kit with the Red Alto Eagle clutches, a new heavy duty trans cooler, a low stall single disc TC, and Transgo shift kit for $1250. Then it took me about a week to rebuild it in my garage. Runs great, the only thing I'd recommend is to go ahead and buy yourself a governor pressure solenoid and sensor, and if you think that your lock up solenoids might be on the way out get them too. My lock up solenoids are fine but within the last 150 miles noticed that it was shifting a little weird, but I attribute that to my gov solenoid going out, or the sensor; so I plan on replacing them both within the week or so. __________________ Chris -99 2500 Ext. Cab, 5" Straight pipe, 2 piece exhaust manifold, Smarty S03-REVO, TC lockup switch, Rebuilt 47RE by Me with goodies, Silencer M.I.A., Weld Typhoons, Jammer Stage 1's, BHAF, Gauges. COUNTRY BOY CAN SURVIVE! Last edited by Electric_Cowboy : 07-13-2008 at 07:18 PM.