video on getting codes

***aaronesq*** · 05-09-2008, 09:54 PM

here's a short clip showing the procedure for reading codes on the dash display. It's not the best quality - but I think it'll help newcomers to the site.

howtoreadcodes.flv - Video - Photobucket - Video and Image Hosting

__________________
'07.5 3500 SLT 6.7L G56 QC LB, Airaid CAI, PMT, KMK Homebrew 5" TBE, Permanent CEL

Lorenz 2.25 Kit, Rollin on stockers. Cutting plates for the EGR/Cooler Delete....

DodgeCTDpower · 05-10-2008, 08:31 PM

Gee thanks i had no idea lol

__________________
2007.5 Dodge 3500 dually 4x4, 6spd auto, Inferno Red, Afe Mega Cannon intake

***mattpopp*** · 05-12-2008, 08:49 AM

does not read the codes all of the time though. when i had the cel light the dash came up with no codes for me at times. If you have pending codes it will not pick that up either. The edge insight has had the best luck for me to read codes and pending codes.

__________________
07.5 6.7l 2500 MegaCab 6sp Auto, 4x4 Inferno Red, Tough Country front Replacement, Browns Rear Replacement, NFab crappie 6 steps, Painted Pocket Flares, 20x10 4.56 backspacing Black Rockstars, 35" Toyo A/T's, 6" Superlift, Air Bags,
96' 2500 4wd, 47RE, Ext Cab,5" TBE,AFE Drop in, 134k ANTI-

Poor People have been voting for Democrats
for the last 50 years... and they are still poor.

pjesson · 05-12-2008, 09:05 AM

How many times has this been asked and answered. Please make this sticky!

Thanks MattPopp!

__________________
2007.5 6.7L 2WD Megacab. Inferno Red - Nerf bars, backup camera, power tailgate lock.
Hopefully: UConnect, foglights. After warrantee maybe homebrew then DPF & EGR delete?

***aaronesq*** · 05-12-2008, 07:00 PM

Mattpopp - thanks for the clarification - you're right on. (Happened to me more than a few times) Anyway - At least it's a place to start for new owners and cuts down on repeat questions.

__________________
'07.5 3500 SLT 6.7L G56 QC LB, Airaid CAI, PMT, KMK Homebrew 5" TBE, Permanent CEL

Lorenz 2.25 Kit, Rollin on stockers. Cutting plates for the EGR/Cooler Delete....

***mattpopp*** · 05-13-2008, 08:52 AM

correct, its a easy operation to start with, if it works great, if it does not ole well

__________________
07.5 6.7l 2500 MegaCab 6sp Auto, 4x4 Inferno Red, Tough Country front Replacement, Browns Rear Replacement, NFab crappie 6 steps, Painted Pocket Flares, 20x10 4.56 backspacing Black Rockstars, 35" Toyo A/T's, 6" Superlift, Air Bags,
96' 2500 4wd, 47RE, Ext Cab,5" TBE,AFE Drop in, 134k ANTI-

Poor People have been voting for Democrats
for the last 50 years... and they are still poor.

wcopp · 05-13-2008, 09:01 AM

I had a cel light today, did that and it said --done-- and the light is gone. weird!

rbmchief · 05-13-2008, 09:03 AM

made a sticky in the 6.7 tech section, thanks for the video.

__________________
02 2500 slt 4x4,auto,icebox cai,silencer ring mia, Quad xzt+,jhook, Pinnacle 4" turbo back exhaust,westach elec fuel guage, isspro transtemp,boost,egt guages in pillar, line x in bed, runnin 2 stroke.

xenowulf · 05-14-2008, 11:59 PM

Quote:

Originally Posted by wcopp

I had a cel light today, did that and it said --done-- and the light is gone. weird!

Did that myself and got the same result, so I took the truck to the dealer and had them read the code. I asked the dealer why I couldn't read it, they said that the key ignition code display only shows very basic codes.

__________________
07.5 6.7 black 2500HD quad cab Big Horn w/ nav, 35inch, Lorenz 3inch 2.5 kit, AMP steps, Warn Trans4mer mount with a M15000 winch, TS MP-8 and still building...

***Cummins 67*** · 05-15-2008, 03:12 PM

Quote:

Originally Posted by wcopp

I had a cel light today, did that and it said --done-- and the light is gone. weird!

Quote:

Originally Posted by xenowulf

Did that myself and got the same result, so I took the truck to the dealer and had them read the code. I asked the dealer why I couldn't read it, they said that the key ignition code display only shows very basic codes.

The reason you dont see them all is they only show active codes not stored codes.

__________________
2007 6.7L Cummins, 4x4, 2500, 6sp manual, std cab, 8ft bed

unimog2 · 08-09-2008, 10:04 AM

Quote:

Originally Posted by aaronesq

here's a short clip showing the procedure for reading codes on the dash display. It's not the best quality - but I think it'll help newcomers to the site.

howtoreadcodes.flv - Video - Photobucket - Video and Image Hosting

TKS much. Big help for us newbies.

__________________
2008 CTD 68RFE Big Horn Edition Quad Cab 4x4. HBS Leveling kit, NITTO Tera Grappler 305/70/17 "E" rated. LEER CAP w/THULE Rack. Juice w/Attitude, S&B intake, H&S 4" stage II

***mspivey*** · 09-21-2008, 03:25 PM

i have a problem getting dodge to fix my truck.the check engine light is on all the time.i take it in they clear it and before i get home it is back on. i removed the cold air box that i installed.no change. theyve already replaced dpf. its been in the shop 6 times in 25000 miles and the light is on again. dodge sure messed up agood truck with all this emissions crap. i dont think much of this 6.7L cummins. mine has no power. and my fuel mileage is down from 19.5mpg to 14.2.i thought this 2007.5 chassis cab would be as good as my 2002 but i was wrong

Last edited by mspivey : 09-21-2008 at 03:39 PM.

05-09-2008, 09:54 PM	#1 (permalink)
*aaronesq* 6.7 = lil bit of heaven Join Date: Nov 2007 Location: Eastern Oregon Posts: 184 aaronesq's Truck Pics	video on getting codes here's a short clip showing the procedure for reading codes on the dash display. It's not the best quality - but I think it'll help newcomers to the site. howtoreadcodes.flv - Video - Photobucket - Video and Image Hosting __________________ '07.5 3500 SLT 6.7L G56 QC LB, Airaid CAI, PMT, KMK Homebrew 5" TBE, Permanent CEL Lorenz 2.25 Kit, Rollin on stockers. Cutting plates for the EGR/Cooler Delete....

05-12-2008, 09:05 AM	#4 (permalink)
pjesson Cummins Fanatic Join Date: Mar 2008 Location: SoCal but going to NC Posts: 114 pjesson's Truck Pics	Oh please please sticky this How many times has this been asked and answered. Please make this sticky! Thanks MattPopp! __________________ 2007.5 6.7L 2WD Megacab. Inferno Red - Nerf bars, backup camera, power tailgate lock. Hopefully: UConnect, foglights. After warrantee maybe homebrew then DPF & EGR delete?

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Remove Advertisements Sponsored Links
Dodge Cummins Diesel Forum Advertisement

05-10-2008, 08:31 PM	#2 (permalink)
DodgeCTDpower Cummins Fan Join Date: Jan 2008 Location: Cresco, IA Posts: 74 DodgeCTDpower's Truck Pics	Gee thanks i had no idea lol __________________ 2007.5 Dodge 3500 dually 4x4, 6spd auto, Inferno Red, Afe Mega Cannon intake

05-12-2008, 08:49 AM	#3 (permalink)
*mattpopp* UR FRIENDSHIP DUES R LATE Join Date: Oct 2007 Location: Cypress Texas Posts: 2,132 mattpopp's Truck Pics	does not read the codes all of the time though. when i had the cel light the dash came up with no codes for me at times. If you have pending codes it will not pick that up either. The edge insight has had the best luck for me to read codes and pending codes. __________________ 07.5 6.7l 2500 MegaCab 6sp Auto, 4x4 Inferno Red, Tough Country front Replacement, Browns Rear Replacement, NFab crappie 6 steps, Painted Pocket Flares, 20x10 4.56 backspacing Black Rockstars, 35" Toyo A/T's, 6" Superlift, Air Bags, 96' 2500 4wd, 47RE, Ext Cab,5" TBE,AFE Drop in, 134k ANTI- Poor People have been voting for Democrats for the last 50 years... and they are still poor.

05-12-2008, 07:00 PM	#5 (permalink)
*aaronesq* 6.7 = lil bit of heaven Join Date: Nov 2007 Location: Eastern Oregon Posts: 184 aaronesq's Truck Pics	Mattpopp - thanks for the clarification - you're right on. (Happened to me more than a few times) Anyway - At least it's a place to start for new owners and cuts down on repeat questions. __________________ '07.5 3500 SLT 6.7L G56 QC LB, Airaid CAI, PMT, KMK Homebrew 5" TBE, Permanent CEL Lorenz 2.25 Kit, Rollin on stockers. Cutting plates for the EGR/Cooler Delete....

05-13-2008, 08:52 AM	#6 (permalink)
*mattpopp* UR FRIENDSHIP DUES R LATE Join Date: Oct 2007 Location: Cypress Texas Posts: 2,132 mattpopp's Truck Pics	correct, its a easy operation to start with, if it works great, if it does not ole well __________________ 07.5 6.7l 2500 MegaCab 6sp Auto, 4x4 Inferno Red, Tough Country front Replacement, Browns Rear Replacement, NFab crappie 6 steps, Painted Pocket Flares, 20x10 4.56 backspacing Black Rockstars, 35" Toyo A/T's, 6" Superlift, Air Bags, 96' 2500 4wd, 47RE, Ext Cab,5" TBE,AFE Drop in, 134k ANTI- Poor People have been voting for Democrats for the last 50 years... and they are still poor.

05-13-2008, 09:01 AM	#7 (permalink)
wcopp Newbie Join Date: Mar 2008 Location: Corpus Christi TX Posts: 15 wcopp's Truck Pics	I had a cel light today, did that and it said --done-- and the light is gone. weird!

05-13-2008, 09:03 AM	#8 (permalink)
rbmchief Super Moderator Join Date: Jan 2007 Location: casper wy Posts: 2,320 rbmchief's Truck Pics	made a sticky in the 6.7 tech section, thanks for the video. __________________ 02 2500 slt 4x4,auto,icebox cai,silencer ring mia, Quad xzt+,jhook, Pinnacle 4" turbo back exhaust,westach elec fuel guage, isspro transtemp,boost,egt guages in pillar, line x in bed, runnin 2 stroke.

09-21-2008, 03:25 PM	#12 (permalink)
*mspivey* Newbie Join Date: Sep 2008 Posts: 2 mspivey's Truck Pics	i have a problem getting dodge to fix my truck.the check engine light is on all the time.i take it in they clear it and before i get home it is back on. i removed the cold air box that i installed.no change. theyve already replaced dpf. its been in the shop 6 times in 25000 miles and the light is on again. dodge sure messed up agood truck with all this emissions crap. i dont think much of this 6.7L cummins. mine has no power. and my fuel mileage is down from 19.5mpg to 14.2.i thought this 2007.5 chassis cab would be as good as my 2002 but i was wrong Last edited by mspivey : 09-21-2008 at 03:39 PM.