Custom Gauge cluster

[-lenny-]

UPS sucks for going to Canada as well. You get gouged with brokerage fees. USPS, no fees. Its worth the extra couple days it takes. Sometimes I have bought stuff from US vendor shipped UPS and brokerage/shipping was more than the part I ordered! Crazy!

__________________
08 MC 3500 68RFE
Mostly Stock

[CW6.7]

Originally Posted by -lenny-

UPS sucks for going to Canada as well. You get gouged with brokerage fees. USPS, no fees. Its worth the extra couple days it takes. Sometimes I have bought stuff from US vendor shipped UPS and brokerage/shipping was more than the part I ordered! Crazy!

Ouch.... lenny your price just went up to $300 to cover shippping....

__________________
07.5 - QCSB - 6.7L - Smarty - Suncoast 44-3D 68RFE - Afe intake - TS MP8 - 5in Magnaflow TBE - Blocked EGR - 22's - Bilstien 5100s - Fox Stabilizer - Optix (Boost, Drive, Trans, Pyro, RP) - Pioneer D3 - Fleece Boost Controler

[Dudgy]

Originally Posted by CW6.7

Ouch.... lenny your price just went up to $300 to cover shippping....

then ship ours in one package haha
usps isn't bad at all, and we don't get raped when we get the parts. You can actually send it as a gift and there is no border fees at all.

__________________

2007.5 Inferno Red 2500 SLT - 6.7L Cummins - 68RFE Auto - Sunroof - 33" MudGrapplers on 17" Core Wheels - DUDGY Bumpers - Bushwacker Pocket Flares - H&S XRT - 5" TBE 6" Mitre Cut Stacks - ISSPRO EV2 Pyro/Boost/Rail/Trans - EGR&Cooler delete - S&B CAI - 3.5" Boost Tube - MagHytec Trans Pan - AMSOIL - HI&LO HID's in Projector Headlights - Recon Clear CabLights - Blue LED Dash Lights

[CW6.7]

Originally Posted by Dudgy

then ship ours in one package haha
usps isn't bad at all, and we don't get raped when we get the parts. You can actually send it as a gift and there is no border fees at all.

I'm about ready to ship you guys both one. I'm hanging on to 3 pods from the first list with no response..... after today i'm moving down the list.

__________________
07.5 - QCSB - 6.7L - Smarty - Suncoast 44-3D 68RFE - Afe intake - TS MP8 - 5in Magnaflow TBE - Blocked EGR - 22's - Bilstien 5100s - Fox Stabilizer - Optix (Boost, Drive, Trans, Pyro, RP) - Pioneer D3 - Fleece Boost Controler

[-lenny-]

Originally Posted by CW6.7

I'm about ready to ship you guys both one. I'm hanging on to 3 pods from the first list with no response..... after today i'm moving down the list.

And I'm not a smiley guy!!!

Sounds great Curt, can't believe it may be so soon! Gonna have to grab a gear and get some gauges!!!!

__________________
08 MC 3500 68RFE
Mostly Stock

[Cummins 67]

You guys are gonna love it.

Got mine today.

Gauges going in tommarrow.

Curt

__________________
2007 6.7L Cummins, 4x4, 2500, 6sp manual, std cab, 8ft bed, SBC clutch OFE, Air Dog, Fluiddamper, Wild Card Customs intake, Smarty ME, 5" TBE, Banks intake w/ SS, Banks Intercooler, BD Steering box brace, Custom gauge Cluster by CW6.7, Isspro Performax gauges
Dynoed @425hp and 1182ft/lbs tq

[-lenny-]

Originally Posted by Cummins 67

You guys are gonna love it.

Got mine today.

Gauges going in tommarrow.

Curt

How about some pics when you get it done? And let us know how you like the Performax gauges. I am going to get the EV2s for my pod.

__________________
08 MC 3500 68RFE
Mostly Stock

[CumminsCowboy]

Got mine in today!

Started playin with it a little figurin out how I want to hook it all up and run the wiring. Got all the electrical run but now I have to run the boost tube. Got dark out so had to quit.

Timed it just right too, goin tomorrow to get the exhaust manifold drilled and tapped for the egt probe.

I will take some pictures tomorrow morning of where and how I ran my wiring to give you all some ideas. As it is I didn't have to drill or anything although I might take a dremel and make a little depression to make sure it doesn't end up pinching any wires.

I'll post them up here as soon as I can. Not sure what my internet abilities are going to be for the next few days.

John

__________________
09 2500 SRW 4X4, Auto, DiPricol Boost/EGT/FP/RP, EGR Unplugged.
Thanks to FTE and Farm Truck Diesel that will change!
06 3500 DRW 4X4, 6 Spd, CFM+ Intake Horn, Silencer Ring MIA, DIY CAI Mod, Cool Hose, TBE Pro Flo 5 to 4 in Duals!~Traded it in...R.I.P. Ole Blue

[Cummins 67]

Originally Posted by -lenny-

How about some pics when you get it done? And let us know how you like the Performax gauges. I am going to get the EV2s for my pod.

Will do.

I will get lots of pics.

__________________
2007 6.7L Cummins, 4x4, 2500, 6sp manual, std cab, 8ft bed, SBC clutch OFE, Air Dog, Fluiddamper, Wild Card Customs intake, Smarty ME, 5" TBE, Banks intake w/ SS, Banks Intercooler, BD Steering box brace, Custom gauge Cluster by CW6.7, Isspro Performax gauges
Dynoed @425hp and 1182ft/lbs tq

[-lenny-]

Thanks guys. I like pics! Can't wait till my pod shows up. Gonna be kick a$$!

__________________
08 MC 3500 68RFE
Mostly Stock

[CD in NM]

I plan on getting mine in as soon as it arrives too. I will be glad to get rid of the a-pillar that my gauges are in presently, be happy to have my grab handle return.

I picked up a pair of multiple wire connectors plugs from Radio Shack that I'm wiring into my setup so I will have a quick disconnect at the pod. It will make it real easy to unplug if I need to tear into the dash components or fix/replace a gauge. I also got a terminal strip that can be used to tie all the gauge lighting together, then 1 wire from there to the source.

I look forward to everyone's pics of their installs.

CD

__________________
2006 Dodge 3500 SLT MC, 6-spd, 3.73 L/S, 4x4, SRW. ISSPRO gauges, Opie, Ice Box,Blue Hose,GDP intake horn,Fab Shop Header, PacBrake,ME. Amsoil BMK-11, GDP 2-micron-big lines. KORE Leveling, MaxxLinks, DefiantSS and shield, RideRites, Helwig Sway,H2's/BFG315's,MagHytek-F/R. Road Armor-Mile Marker, RanchHand HeadacheRack and rear bumper, PopUp GN, Prodigy, Galaxy DX94HP-Wilson 1K roofmount.

[-lenny-]

Originally Posted by CD in NM

I also got a terminal strip that can be used to tie all the gauge lighting together, then 1 wire from there to the source.

I look forward to everyone's pics of their installs.

CD

I never thought about that. I guess otherwise you would need a line going from each gauge to a power source? But this way, you run all the gauges to the terminal strip, and then run a line from the terminal strip to the power source?

__________________
08 MC 3500 68RFE
Mostly Stock