Hood Scoops

[cabanaman]

Originally Posted by DIESELDAWG05

get the real one from dodge...aftermarket dnt seeem 2 fit right

If this one didn't fit right it wouldn't be on my truck.

__________________
2007.5 2500 SLT sport 2wd, Rumble bee hood scoop,6 spd auto,exhaust brake, EGR delete, Gen1 DPF delete, Intake baffle pulled, AX flash, 19mpg city 23mpg highway.
hypertech Econ program B

[bmorgan]

I have the one that you have to drill holes, i would be careful with that 3m tape one, cause change in heat and even the heat from the motor could cause the tape to lose it stickyness and going down the road at 65mph will lift that bad boy off. Just my past experience...

__________________
07.5 Mega Cab 6" Lift w/ Dual Fox Shox, 37x13.50x20, Mag Hytec covers, AMP Power Steps, Tire Gate, BiXenon 8000K, AFE Intake, H&S 5" STRAIGHT pipe to dual MBRP, K2 MP-8, K2 EGR & Cooler delete, Edge Juice w/ Attitude, shimmed fuel rail.more to come.

[cabanaman]

Originally Posted by bmorgan

I have the one that you have to drill holes, i would be careful with that 3m tape one, cause change in heat and even the heat from the motor could cause the tape to lose it stickyness and going down the road at 65mph will lift that bad boy off. Just my past experience...

I've learned to trust the 3M tape if properly installed on a clean surface. I installed a bugflecter and window shields on my 2000 durango when it was new, it's nine years and 225,000 miles and they are still there. Good enough for me:thumbsup

__________________
2007.5 2500 SLT sport 2wd, Rumble bee hood scoop,6 spd auto,exhaust brake, EGR delete, Gen1 DPF delete, Intake baffle pulled, AX flash, 19mpg city 23mpg highway.
hypertech Econ program B

[bmorgan]

If that works for you. I have seen them pop off before, if temps are warm and installed properly. All i know is i would rather put a couple holes in my hood being that i am not going to remove the scoop. I am not trying to get a mangled hood scoop and broken windshield, but just personal prefrence...

__________________
07.5 Mega Cab 6" Lift w/ Dual Fox Shox, 37x13.50x20, Mag Hytec covers, AMP Power Steps, Tire Gate, BiXenon 8000K, AFE Intake, H&S 5" STRAIGHT pipe to dual MBRP, K2 MP-8, K2 EGR & Cooler delete, Edge Juice w/ Attitude, shimmed fuel rail.more to come.

[RedRum]

Originally Posted by 07HighLife

Anybody have any ideas on hood scoops. ive seen some pics on some of your truck and they look bad . if you can, let me know some brands and maybe prices too. thanks

I too am searching for a hood scoop.
I found this place. Think I am going to go with the double scoop (HS002) and paint it myself.

Dodge Hood Scoops

__________________
2007 3500 QCLB, 5.9, ISSPRO, AFE Stage 2, AF1 intake horn, Smarty, SB 3600#, Straight Piped with 6" Mitres, 6" lift, Bilstein 5100s/dual steering stabs., trac bars 37" BFG M/Ts, CUMMINS FORUM STICKER!May 2009 ROTM-Thanks to James @ RSD for stepping up!
2006 3500 QC Bighorn, 6 speed, No silencer ring, B&W turnover, other than that, stock
"I Caught that diesel thing, now it stings when I pee"

[SmokinRam01]

heres mine.......I know its a 2nd gen.......but theres something going on under there!! :thumbsup

__________________
2001 Sport Quad 4X4, Edge Juice w/Attitude "Hot",stacks with soft bed cover, 315x75x16 M.T. ATZs,level kit,Airdog 150,FBD's 150's, Sliver Bullet 62,BHAF with Outterwears,SunCoast Tripple Lock Converter and TorqLoc switch 865-806-8151, Blackberry PIN# 31C52156

[06dodge360]

"but theres something going on under there"

Ya like cracks in your hood, what's up with that.

__________________
2006 Mega Cab, Volant CAI, 4.5" Fabtech Lift, Incubus 20" wheels, 35" Toyo Open Country AT's, Smarty, Quad Boost Fooler, AFE muffler, Tinted out, Truxedo Tonneau cover

[SmokinRam01]

its not finished yet.............still have some work to be done and then paint............been puttin money else where

__________________
2001 Sport Quad 4X4, Edge Juice w/Attitude "Hot",stacks with soft bed cover, 315x75x16 M.T. ATZs,level kit,Airdog 150,FBD's 150's, Sliver Bullet 62,BHAF with Outterwears,SunCoast Tripple Lock Converter and TorqLoc switch 865-806-8151, Blackberry PIN# 31C52156

[cabanaman]

Originally Posted by SmokinRam01

its not finished yet.............still have some work to be done and then paint............been puttin money else where

That cracking really caught my eye also. Probably should have posted that after it was done.
It has potential:thumbsup

__________________
2007.5 2500 SLT sport 2wd, Rumble bee hood scoop,6 spd auto,exhaust brake, EGR delete, Gen1 DPF delete, Intake baffle pulled, AX flash, 19mpg city 23mpg highway.
hypertech Econ program B

---

Last edited by cabanaman : 12-10-2008 at 09:44 AM.

[Chuckoffshore]

Did the scoop have a particular name. I have priced one at a dealership in central texas and that priced it at 700 and billet grile was 300.

[Nitrous340]

How about rockin one of these!! I had one on my "Nascar"..... It was a 91 Hyundia Excel 1.5L 4spd with 2.5 striaght pipe and every kinda of automotive aftermarket sticker I could get my hands on...

__________________
2001 2500 4x4
PDR HX-40, PSC brace, Hamilton 110 springs, Fluidamper, ARP studs, Adrenalin, DDP 150, custom intake, 4" straight pipe, AIRDOG 150, BD black FP, Suncoast billet trans, 3-disc converter, 3rd Gen Brakes, Thuren 3rd Gen track bar. RIP grandpa "Red" 10-11-08
WAGNAAR MOTORSPORTS

[silvercummins31]

I have a pair i will sell for $50 plus shipping they are 2 single that you 3m to attach them and are the ram air style was on a truck for 2 weeks. Pm me if you are interested

__________________
01.5 2500 6 spd. HO silver, Quad Cab Short Bed. 120k, Edge Juice w/ Attitude HOT, amsoil 4510, 4 inch Straight pipe, silencer ring gone DISCOUNT TIRE