Regen problem

VTGrad · 07-16-2008, 12:00 PM

I'm having trouble with my truck going into regen, even with the dpf delete. H&S Performance was good enough to overnight me their updated black boxes, the three that plug in. However, the problem is still there. They suggested I have a flash done, anyone???

MuscleHead · 07-16-2008, 04:02 PM

Quote:

Originally Posted by VTGrad

I'm having trouble with my truck going into regen, even with the dpf delete. H&S Performance was good enough to overnight me their updated black boxes, the three that plug in. However, the problem is still there. They suggested I have a flash done, anyone???

What did you do with the hoses to the pressure sensor?

__________________
07 2500 TRX4 Offroad, 6.7L Cummins, 5" Pro-Comp Lift, 37" Toyo M/Ts, 18x10 Mickey Thompson Wheels,4:10 gearing,Amp Research Electric Steps,MIA Intake Baffle,Husky Liners front and rear,Bully Dog PMT ,H&S 5" Dpf Delete,K2 EGR Delete

***Compcowboy*** · 07-16-2008, 10:14 PM

Quote:

Originally Posted by MuscleHead

What did you do with the hoses to the pressure sensor?

Yeah What he said?

Make sure they are left unplugged but the sensor is connected to the wiring harness.

__________________
429 Hp 832 Tq - 2007 6.7 2500 Bighorn Edition 4x4 6-spd Manual, Airdog 150, "HOT" Edge Juice w/ Attitude, TS MP-8, Airbags with Dual Control Air Compressor, H&S Delete & Downpipe, What EGR?, Valair Dual Disk, Amsoil Bmk-11 Bypass, 6" Aussies & Hushpower Muffler Thanks to Wally At FTEDiesel!!!!!

VTGrad · 07-22-2008, 11:15 AM

Sorry--left the computer behind for a trip to Vegas. Anyway, I left the sensors in place and unhooked. I then hooked the black boxes into the wiring harness. The problem continued, my Edge would not clear the codes but then I used my PPE. Knock on wood--that cleared the problem even though I removed the black boxes after the regen continued. ???

MuscleHead · 07-22-2008, 08:09 PM

Are you changing the settings on the PPE alot? Wasnt there something at one point about changing the setting would make the ecm look for the dpf?

__________________
07 2500 TRX4 Offroad, 6.7L Cummins, 5" Pro-Comp Lift, 37" Toyo M/Ts, 18x10 Mickey Thompson Wheels,4:10 gearing,Amp Research Electric Steps,MIA Intake Baffle,Husky Liners front and rear,Bully Dog PMT ,H&S 5" Dpf Delete,K2 EGR Delete

VTGrad · 07-25-2008, 12:18 AM

No, I generally leave the settings on the PPE alone but .... Now the damn thing is throwing a P242F, P1451, and a P0106 which my Edge won't clear the first two. I took it by my dealer today and the service manager tried to clear them but was unable to. I was running without the three black boxes on the exhaust from H&S and it was just throwing codes. When I put them back on it went into regen and has stayed in regen? I'm afraid I might have to put my EGR and exhaust back on and schedule a visit to the dealership.

07-16-2008, 12:00 PM	#1 (permalink)
VTGrad Newbie Join Date: Apr 2008 Posts: 21 VTGrad's Truck Pics	Regen problem I'm having trouble with my truck going into regen, even with the dpf delete. H&S Performance was good enough to overnight me their updated black boxes, the three that plug in. However, the problem is still there. They suggested I have a flash done, anyone???

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Remove Advertisements Sponsored Links
Dodge Cummins Diesel Forum Advertisement

07-22-2008, 11:15 AM	#4 (permalink)
VTGrad Newbie Join Date: Apr 2008 Posts: 21 VTGrad's Truck Pics	Sorry--left the computer behind for a trip to Vegas. Anyway, I left the sensors in place and unhooked. I then hooked the black boxes into the wiring harness. The problem continued, my Edge would not clear the codes but then I used my PPE. Knock on wood--that cleared the problem even though I removed the black boxes after the regen continued. ???

07-22-2008, 08:09 PM	#5 (permalink)
MuscleHead Diesel Freak Join Date: Dec 2007 Location: Jackson,TN Posts: 723 MuscleHead's Truck Pics	Are you changing the settings on the PPE alot? Wasnt there something at one point about changing the setting would make the ecm look for the dpf? __________________ 07 2500 TRX4 Offroad, 6.7L Cummins, 5" Pro-Comp Lift, 37" Toyo M/Ts, 18x10 Mickey Thompson Wheels,4:10 gearing,Amp Research Electric Steps,MIA Intake Baffle,Husky Liners front and rear,Bully Dog PMT ,H&S 5" Dpf Delete,K2 EGR Delete

07-25-2008, 12:18 AM	#6 (permalink)
VTGrad Newbie Join Date: Apr 2008 Posts: 21 VTGrad's Truck Pics	No, I generally leave the settings on the PPE alone but .... Now the damn thing is throwing a P242F, P1451, and a P0106 which my Edge won't clear the first two. I took it by my dealer today and the service manager tried to clear them but was unable to. I was running without the three black boxes on the exhaust from H&S and it was just throwing codes. When I put them back on it went into regen and has stayed in regen? I'm afraid I might have to put my EGR and exhaust back on and schedule a visit to the dealership.