03 DRW Crew 4x4 6 Speed 29MPG!!!

Andrew Allen · 09-26-2009, 02:16 AM

Hey guys... got my 03 3500 Crew Cab for sale, looking to go to a 12 valve, or just put a motor in my 79 Ford F-350 but enough about that, the truck has/had done to it as follows

Bought it last fall with 230,000 miles on it never pulled a trailer except the dealer i bought it from used it once to get a classic car, truck now has 255,000, pull an 18 ft. bumper pull once a week on average, Truck was not drivin hard, it was/is my ride to and from school, i go to school 600 miles from home so i bought this because of the proven cummins MPG's and i made them better

6 Speed with Single Disk Prototype Feramic clutch with 3400 lb plate load (of course new throw out bearing)

Smarty TNT(so i can play with peramiters to get the 29 MPG)

New CP3 with Stage 1 BOP by Industrial Injection

FASS 150/150 Lift pump

Newer injectors, pulled them from my buddies wrecked truck with 40,000 miles on them

Gauge pod on A-Pillar (Boost, EGT, Oil Temp)

Big K&N Air Filter

Put new Nitto Tera Grapplers on it last fall, still got 60% tread or more on them now, they are 295/70/17's 1/2" spacers inside duals, and 1.5" spacer between duals

2" leveling kit

New Ball joints this spring, U-Joints in front axle

New brake pads in the rear, have new ones for front that i will include with truck, also bought all new steering(Tie Rod ends, drag links etc that i paid over $300 for but never put on, i will include them for $200 or return them)

All parts are NAPA PREMIUM!! i will only use the best on my trucks!

The bad :/ the truck got keyed at school, its hard to see unless you are up close, but my dad would not let me file an insurance claim

It has 3:73 gears and has enough Power/Torque to pull anything you could ever imagine!! It will beat up on ricers and some american cars too!! beat a 5.0 Fox Body Mustang from 15 MPH to 120 MPH!! truck is very safe and i would not hesitate to drive to california tomorrow!

Its got all the power goodies, power/heated mirrors, power windows, door locks, AC, CC it all works!!

I have over $21,000 into this truck and am asking $17,000

Here are pictures and if you have any questions feel free to email me at Arallen@mtu.edu or call/text me at 269 - 579 - 9890

__________________
03 Dually with Smarty W/ TNT, FASS 150/150, Stage 1 CP3, K&N, 6 speed W/ Prototype Single Disk Feramic Clutch, Boost Elbow, 2" leveling kit, 295/70/r17 Nitto Terra Grapplers, A-Pillar Triple Gauge pod

devolver · 09-26-2009, 09:02 AM

is that a pulling hitch? did you make it yourself?

__________________
05 QCSB 4x4 G56-tnt/mp8- FBD 5"-AD150-studs-twins-dual cp3-3850dd-dipricol- quad RP, 20" hulks w/x-muds

5/31/09 558.69hp & 1014.93tq w/ stock fuel system
94 4x4 5 spd- getting a 54 power wagon body

02 Cummin Then Stroken · 09-26-2009, 12:03 PM

I got $12,500

__________________
04 Dodge 2500 quad cab, 6"stack,pillar,Edge pro.Stock-
95 Dodge 3500 12v ext cab 5sp,Stock New Paint and custom int.Sold:02 2500 Custom dually-flatbed

WonderBoy · 09-26-2009, 12:50 PM

Ever pulled a gooseneck with it? got my 12 valve for sell right now. How close are you to Detroit?

PM me if you are interested.

__________________
98 12 valve, Vannest Performance Tune, Dunrite Valve Body, TC toggle, KDP'd, fuel plate slid, star wheel maxxed, ISSPRO pillar guages, MBRP exhaust, Optima Red Tops, Dacco Single Disk Billet w/ custom low stall, AFC tweaked,

Andrew Allen · 09-26-2009, 01:53 PM

Devolver - yeah, its a pullin hitch i made when i had my ford, i had an 02 ford F-350 with big injectors and trans and stacks and all that good stuff that i pulled with, this truck i got 1 hook with and never made it very far, i blew the intercooler boot off after 10 feet haha so it never got abused

02 - Anything a little better??

Wonderboy - Nope! no Gooseneck no 5th Wheel no nothin! the dealer pulled a car hauler once with it, i pulled my dads John Deere 4400 occasionaly because his 97 250 Powerjoke needs more nuts and bigger springs in the rear

__________________
03 Dually with Smarty W/ TNT, FASS 150/150, Stage 1 CP3, K&N, 6 speed W/ Prototype Single Disk Feramic Clutch, Boost Elbow, 2" leveling kit, 295/70/r17 Nitto Terra Grapplers, A-Pillar Triple Gauge pod

**sofakingbad** · 09-28-2009, 09:09 PM

so how does the truck look now? each picture is different?

__________________

05 Cummins 4x4 auto
01 cummins 2wd 6speed
06 Duramax LBZ- sold

Andrew Allen · 09-28-2009, 10:45 PM

its got the black wheels on it right now, but i still got the chrome hubbys for it, it also has the black valance on it but i can take it off

__________________
03 Dually with Smarty W/ TNT, FASS 150/150, Stage 1 CP3, K&N, 6 speed W/ Prototype Single Disk Feramic Clutch, Boost Elbow, 2" leveling kit, 295/70/r17 Nitto Terra Grapplers, A-Pillar Triple Gauge pod

***12vredneck*** · 10-13-2009, 10:09 AM

would you be interested in trading for a 1994 dodge ram 2500 4x4:

ENGINE
150gph airdog fuel system with drawstraw
435 pure diesel power injectors
191 schide laser cut delivery valves
HTT Prostreet 66/71/16 charger with stainless exhaust housing. May not be on for long may go to twins.
AFC Housing gutted
No fuel plate
5" Exhaust
17* Timing
LOTS of pump work
4k PDR Gov springs
Bhaf intake
ATS 3 piece exhaust manifold
New intake horn gaskets
New valve cover gaskets
New Turbo gaskets
New exhaust manifold gaskets
New rear main seal

TRANSMISSON/DRIVETRAIN
Goerends Triple disk convertor
Billet input shaft
red clay clutches
Valve body with shift kit
Built Front driveshaft
New HD U-joints
Traction Bars
Moog Ball Joints
Dana 70 Rear with new axle seals and 4.10 gears
Dana 60 Front with 4.10 gears
procomp suspension
4x4 posi lock system

Cosmetic/Body
20x10" moto metal wheels
33x13.50 mickey thomson atz's
Newer custom paint
Cowl induction hood (needs painted)
Tow mirrors
2.5" leveling kit
New 5% window tint DOUBLE BANNER windshield tint strips
New passenger side fender (not installed yet)
Glowshift gauges triple piller gauge pod and steering colum pod w/pyro, boost, fuel pressure, and trans temp
1998 style seats
Smoked L.E.D. tail lights
Tint head lights and thrid brake light
Painted black bumpers
Black billet style grille
new style emblems
gooseneck ball
reese hitch
trailer brake controller

__________________
1994 2500 4x4 goerend auto,new paintjob,20" rims,5" exhaust,no fuel plate,pro comp suspension,4:10 gears,triple gauge pod, ,l.e.d lights,tow mirrors,, LOTS OF PUMP WORK, 191 SCHIDE LASER CUT DELIVERY VALVES, John Deere intake, 2.5" leveling kit, 435 Injectors, 4k gov springs, airdog 150gph fuel system, HTT PROSTREET 66/71/16 TURBO, ATS manifold, 12MM STUDS, 6OLB SPRINGS, DEEP TRANNY PAN, TRACTION BARS

OHIO COAL ROLLERS

Andrew Allen · 10-13-2009, 12:51 PM

Quote:

Originally Posted by Bad-Duvall

I Call BS on ur MPG

like i said, set the cruise at 60, 61 and have the timing set high, rail pressure set low, plus its a 6 speed not an auto.. and i just found out on my 10 hr trip last night, to get 28 mpg its gotta be somewhat warm, when its 40 or below i cant get engine oil above 178 degrees so my mpg was only 24

__________________
03 Dually with Smarty W/ TNT, FASS 150/150, Stage 1 CP3, K&N, 6 speed W/ Prototype Single Disk Feramic Clutch, Boost Elbow, 2" leveling kit, 295/70/r17 Nitto Terra Grapplers, A-Pillar Triple Gauge pod

Andrew Allen · 10-13-2009, 12:54 PM

Quote:

Originally Posted by 12vredneck

would you be interested in trading for a 1994 dodge ram 2500 4x4:

ENGINE
150gph airdog fuel system with drawstraw
435 pure diesel power injectors
191 schide laser cut delivery valves
HTT Prostreet 66/71/16 charger with stainless exhaust housing. May not be on for long may go to twins.
AFC Housing gutted
No fuel plate
5" Exhaust
17* Timing
LOTS of pump work
4k PDR Gov springs
Bhaf intake
ATS 3 piece exhaust manifold
New intake horn gaskets
New valve cover gaskets
New Turbo gaskets
New exhaust manifold gaskets
New rear main seal

TRANSMISSON/DRIVETRAIN
Goerends Triple disk convertor
Billet input shaft
red clay clutches
Valve body with shift kit
Built Front driveshaft
New HD U-joints
Traction Bars
Moog Ball Joints
Dana 70 Rear with new axle seals and 4.10 gears
Dana 60 Front with 4.10 gears
procomp suspension
4x4 posi lock system

Cosmetic/Body
20x10" moto metal wheels
33x13.50 mickey thomson atz's
Newer custom paint
Cowl induction hood (needs painted)
Tow mirrors
2.5" leveling kit
New 5% window tint DOUBLE BANNER windshield tint strips
New passenger side fender (not installed yet)
Glowshift gauges triple piller gauge pod and steering colum pod w/pyro, boost, fuel pressure, and trans temp
1998 style seats
Smoked L.E.D. tail lights
Tint head lights and thrid brake light
Painted black bumpers
Black billet style grille
new style emblems
gooseneck ball
reese hitch
trailer brake controller

I just did the rockers... but ill send ya a PM on the trade offer

__________________
03 Dually with Smarty W/ TNT, FASS 150/150, Stage 1 CP3, K&N, 6 speed W/ Prototype Single Disk Feramic Clutch, Boost Elbow, 2" leveling kit, 295/70/r17 Nitto Terra Grapplers, A-Pillar Triple Gauge pod

Grr · 10-15-2009, 03:14 AM

A 1-ton drw 4x4 on nobbies/at tires getting close to 30mpg running pump diesel? Do you know of anybody else getting anywhere close to that?

***Cummins6speed*** · 10-15-2009, 03:22 AM

I remember reading the thread on the valence you made after you lost MPG taking the stock one and lost even more after levelling it then gained it all back with the custom made one

__________________
My truck: 06 5.9 G56 4x4 Quad Cab Short Bed Patriot Blue. Smarty TNT, Valair 3600DD, DiPricol's, Home made intake w/ amsoil filter, Straight Piped w/ 7" tip, silencer ring MIA, glove box sticker MIA 2/28/09-470hp/980tq

IBEW 551-PACIFIC COAST DIESEL

09-26-2009, 02:16 AM	#1 (permalink)
Andrew Allen Diesel Freak Join Date: Dec 2008 Location: Marshall, MI Posts: 941 Thanks: 2 Thanked 6 Times in 6 Posts Andrew Allen's Truck Pics	03 DRW Crew 4x4 6 Speed 29MPG!!! Hey guys... got my 03 3500 Crew Cab for sale, looking to go to a 12 valve, or just put a motor in my 79 Ford F-350 but enough about that, the truck has/had done to it as follows Bought it last fall with 230,000 miles on it never pulled a trailer except the dealer i bought it from used it once to get a classic car, truck now has 255,000, pull an 18 ft. bumper pull once a week on average, Truck was not drivin hard, it was/is my ride to and from school, i go to school 600 miles from home so i bought this because of the proven cummins MPG's and i made them better 6 Speed with Single Disk Prototype Feramic clutch with 3400 lb plate load (of course new throw out bearing) Smarty TNT(so i can play with peramiters to get the 29 MPG) New CP3 with Stage 1 BOP by Industrial Injection FASS 150/150 Lift pump Newer injectors, pulled them from my buddies wrecked truck with 40,000 miles on them Gauge pod on A-Pillar (Boost, EGT, Oil Temp) Big K&N Air Filter Put new Nitto Tera Grapplers on it last fall, still got 60% tread or more on them now, they are 295/70/17's 1/2" spacers inside duals, and 1.5" spacer between duals 2" leveling kit New Ball joints this spring, U-Joints in front axle New brake pads in the rear, have new ones for front that i will include with truck, also bought all new steering(Tie Rod ends, drag links etc that i paid over $300 for but never put on, i will include them for $200 or return them) All parts are NAPA PREMIUM!! i will only use the best on my trucks! The bad :/ the truck got keyed at school, its hard to see unless you are up close, but my dad would not let me file an insurance claim It has 3:73 gears and has enough Power/Torque to pull anything you could ever imagine!! It will beat up on ricers and some american cars too!! beat a 5.0 Fox Body Mustang from 15 MPH to 120 MPH!! truck is very safe and i would not hesitate to drive to california tomorrow! Its got all the power goodies, power/heated mirrors, power windows, door locks, AC, CC it all works!! I have over $21,000 into this truck and am asking $17,000 Here are pictures and if you have any questions feel free to email me at Arallen@mtu.edu or call/text me at 269 - 579 - 9890 __________________ 03 Dually with Smarty W/ TNT, FASS 150/150, Stage 1 CP3, K&N, 6 speed W/ Prototype Single Disk Feramic Clutch, Boost Elbow, 2" leveling kit, 295/70/r17 Nitto Terra Grapplers, A-Pillar Triple Gauge pod

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Remove Advertisements Sponsored Links
Dodge Cummins Diesel Forum Advertisement

09-26-2009, 09:02 AM	#2 (permalink)
devolver Cummins Nut Join Date: Apr 2008 Location: honesdale, pa Posts: 331 Thanks: 1 Thanked 4 Times in 4 Posts devolver's Truck Pics	is that a pulling hitch? did you make it yourself? __________________ 05 QCSB 4x4 G56-tnt/mp8- FBD 5"-AD150-studs-twins-dual cp3-3850dd-dipricol- quad RP, 20" hulks w/x-muds 5/31/09 558.69hp & 1014.93tq w/ stock fuel system 94 4x4 5 spd- getting a 54 power wagon body

09-26-2009, 12:03 PM	#3 (permalink)
02 Cummin Then Stroken Cummins Fan Join Date: Feb 2009 Location: Ocala,Florida Posts: 90 Thanks: 0 Thanked 0 Times in 0 Posts 02 Cummin Then Stroken's Truck Pics	I got $12,500 __________________ 04 Dodge 2500 quad cab, 6"stack,pillar,Edge pro.Stock- 95 Dodge 3500 12v ext cab 5sp,Stock New Paint and custom int.Sold:02 2500 Custom dually-flatbed

09-26-2009, 12:50 PM	#4 (permalink)
WonderBoy Newbie Join Date: Dec 2008 Location: Proctorville,Ohio Posts: 20 Thanks: 2 Thanked 0 Times in 0 Posts WonderBoy's Truck Pics	Ever pulled a gooseneck with it? got my 12 valve for sell right now. How close are you to Detroit? PM me if you are interested. __________________ 98 12 valve, Vannest Performance Tune, Dunrite Valve Body, TC toggle, KDP'd, fuel plate slid, star wheel maxxed, ISSPRO pillar guages, MBRP exhaust, Optima Red Tops, Dacco Single Disk Billet w/ custom low stall, AFC tweaked,

09-26-2009, 01:53 PM	#5 (permalink)
Andrew Allen Diesel Freak Join Date: Dec 2008 Location: Marshall, MI Posts: 941 Thanks: 2 Thanked 6 Times in 6 Posts Andrew Allen's Truck Pics	Devolver - yeah, its a pullin hitch i made when i had my ford, i had an 02 ford F-350 with big injectors and trans and stacks and all that good stuff that i pulled with, this truck i got 1 hook with and never made it very far, i blew the intercooler boot off after 10 feet haha so it never got abused 02 - Anything a little better?? Wonderboy - Nope! no Gooseneck no 5th Wheel no nothin! the dealer pulled a car hauler once with it, i pulled my dads John Deere 4400 occasionaly because his 97 250 Powerjoke needs more nuts and bigger springs in the rear __________________ 03 Dually with Smarty W/ TNT, FASS 150/150, Stage 1 CP3, K&N, 6 speed W/ Prototype Single Disk Feramic Clutch, Boost Elbow, 2" leveling kit, 295/70/r17 Nitto Terra Grapplers, A-Pillar Triple Gauge pod

09-28-2009, 09:09 PM	#6 (permalink)
sofakingbad New Mexico Chapter President Join Date: May 2008 Location: Las Cruces,NM Posts: 4,263 Thanks: 0 Thanked 35 Times in 32 Posts sofakingbad's Truck Pics	so how does the truck look now? each picture is different? __________________ 05 Cummins 4x4 auto 01 cummins 2wd 6speed 06 Duramax LBZ- sold

09-28-2009, 10:45 PM	#7 (permalink)
Andrew Allen Diesel Freak Join Date: Dec 2008 Location: Marshall, MI Posts: 941 Thanks: 2 Thanked 6 Times in 6 Posts Andrew Allen's Truck Pics	its got the black wheels on it right now, but i still got the chrome hubbys for it, it also has the black valance on it but i can take it off __________________ 03 Dually with Smarty W/ TNT, FASS 150/150, Stage 1 CP3, K&N, 6 speed W/ Prototype Single Disk Feramic Clutch, Boost Elbow, 2" leveling kit, 295/70/r17 Nitto Terra Grapplers, A-Pillar Triple Gauge pod

10-13-2009, 10:09 AM	#8 (permalink)
*12vredneck* PROUD COAL ROLLER Join Date: Dec 2008 Location: waynesville, ohio Posts: 610 Thanks: 1 Thanked 3 Times in 3 Posts 12vredneck's Truck Pics	would you be interested in trading for a 1994 dodge ram 2500 4x4: ENGINE 150gph airdog fuel system with drawstraw 435 pure diesel power injectors 191 schide laser cut delivery valves HTT Prostreet 66/71/16 charger with stainless exhaust housing. May not be on for long may go to twins. AFC Housing gutted No fuel plate 5" Exhaust 17* Timing LOTS of pump work 4k PDR Gov springs Bhaf intake ATS 3 piece exhaust manifold New intake horn gaskets New valve cover gaskets New Turbo gaskets New exhaust manifold gaskets New rear main seal TRANSMISSON/DRIVETRAIN Goerends Triple disk convertor Billet input shaft red clay clutches Valve body with shift kit Built Front driveshaft New HD U-joints Traction Bars Moog Ball Joints Dana 70 Rear with new axle seals and 4.10 gears Dana 60 Front with 4.10 gears procomp suspension 4x4 posi lock system Cosmetic/Body 20x10" moto metal wheels 33x13.50 mickey thomson atz's Newer custom paint Cowl induction hood (needs painted) Tow mirrors 2.5" leveling kit New 5% window tint DOUBLE BANNER windshield tint strips New passenger side fender (not installed yet) Glowshift gauges triple piller gauge pod and steering colum pod w/pyro, boost, fuel pressure, and trans temp 1998 style seats Smoked L.E.D. tail lights Tint head lights and thrid brake light Painted black bumpers Black billet style grille new style emblems gooseneck ball reese hitch trailer brake controller __________________ 1994 2500 4x4 goerend auto,new paintjob,20" rims,5" exhaust,no fuel plate,pro comp suspension,4:10 gears,triple gauge pod, ,l.e.d lights,tow mirrors,, LOTS OF PUMP WORK, 191 SCHIDE LASER CUT DELIVERY VALVES, John Deere intake, 2.5" leveling kit, 435 Injectors, 4k gov springs, airdog 150gph fuel system, HTT PROSTREET 66/71/16 TURBO, ATS manifold, 12MM STUDS, 6OLB SPRINGS, DEEP TRANNY PAN, TRACTION BARS *OHIO COAL ROLLERS*

10-15-2009, 03:14 AM	#11 (permalink)
Grr Newbie Join Date: May 2009 Posts: 5 Thanks: 0 Thanked 0 Times in 0 Posts Grr's Truck Pics	A 1-ton drw 4x4 on nobbies/at tires getting close to 30mpg running pump diesel? Do you know of anybody else getting anywhere close to that?

10-15-2009, 03:22 AM	#12 (permalink)
*Cummins6speed* Cummins Crazy Join Date: Jun 2007 Location: Petaluma, CA Posts: 5,296 Thanks: 88 Thanked 121 Times in 98 Posts Cummins6speed's Truck Pics	I remember reading the thread on the valence you made after you lost MPG taking the stock one and lost even more after levelling it then gained it all back with the custom made one __________________ My truck: 06 5.9 G56 4x4 Quad Cab Short Bed Patriot Blue. Smarty TNT, Valair 3600DD, DiPricol's, Home made intake w/ amsoil filter, Straight Piped w/ 7" tip, silencer ring MIA, glove box sticker MIA 2/28/09-470hp/980tq IBEW 551-PACIFIC COAST DIESEL