Guys check your 4th injector line. STICKY!!!!! - Page 2

7mm · 09-16-2009, 11:29 PM

This just happened to my friends 05. Hairline crack right at the neck as the fellow above just stated. Problem was we were right in the middle of the Dempster Hwy in Northern Canada. 750 kms of uninhabited tundra/dirt/mud road pulling trailers - one stop with a gas station and their tow truck was out of commision! Mobile CAT welder mechanic brazed it for us

__________________
2007 5.9, Auto, AFE Stage 1 Pro-Guard 7, BFG 285's, Smarty Jr - Edge Insight Monitor

ashade07 · 09-16-2009, 11:39 PM

Good heads up! I put a few clicks on mine (a little timid about overdoing it) rather easily. My rig has only got 23k on it! Checked all the others, they were tight.

__________________
07 2500 Cummins Laramie 5.9 4x4: DiPricol Optix: EGT/Boost/Trans Temp, S&B cai, 4" MBRP pro series c/b, Smarty POD, Mag-Hytec DD t/p, more tranny upgrades to come...

Mopar99360 · 09-17-2009, 03:37 PM

Can anyone take a picture for those of us who only know how to look at pictures?
Thks

__________________

05 Blu QC 2500 4X4, Auto, XDI, Exht (Wifes Rig), 05 Wht QC 2500 4X4, 6 spd, S&B, Exht: (My Rig)

***JWH_03_Dodge*** · 09-17-2009, 03:49 PM

go here

Fixing one cause of the tick-tick-tick in a 3rd gen

__________________
John - 03 QC/LB 4x4 5sp
Visit the Hoosier Truck Club
FTE Diesel FASS giveaway Click here!!!

Quote:

Originally Posted by Broke Down

come on Steve....my nuts hurt and i am stuck on the couch

***JWH_03_Dodge*** · 09-17-2009, 03:50 PM

its the one in the center of the picture

__________________
John - 03 QC/LB 4x4 5sp
Visit the Hoosier Truck Club
FTE Diesel FASS giveaway Click here!!!

Quote:

Originally Posted by Broke Down

come on Steve....my nuts hurt and i am stuck on the couch

torque monster · 09-17-2009, 03:55 PM

Should I worry about this in my 04-305hp, I think i hear a tick-tick-tick sometimes from underneath the hood?

__________________
2004 CR - A Few Bolt Ons

***JWH_03_Dodge*** · 09-17-2009, 04:02 PM

won't hurt to pop the hood and put a wrench on it just to check

I had one loose before I did injectors way back when. went to undo the bolt and it was already loose

__________________
John - 03 QC/LB 4x4 5sp
Visit the Hoosier Truck Club
FTE Diesel FASS giveaway Click here!!!

Quote:

Originally Posted by Broke Down

come on Steve....my nuts hurt and i am stuck on the couch

torque monster · 09-17-2009, 04:10 PM

Quote:

Originally Posted by JWH_03_Dodge

won't hurt to pop the hood and put a wrench on it just to check

I had one loose before I did injectors way back when. went to undo the bolt and it was already loose

Is it the blue little clamp? what size socket? and which one is the target?

__________________
2004 CR - A Few Bolt Ons

LeeWayne · 09-17-2009, 06:10 PM

ya I replaced mine as well i was sitting at idle at work one morning and smelt diesel popped the hood sure enough saw it leaking. My uncle works on diesel's for a living and he said it's the vibration from the motor that cracks the line. he had a guy replace all the lines in one of there trucks and then next day had to replace all of them again because the guy didn't put the line holders on and they all vibrated and cracked

__________________
06 5.9 3500 dually, longbed, singlecab, 6spd,

ashade07 · 09-17-2009, 06:49 PM

Quote:

Is it the blue little clamp? what size socket? and which one is the target?

Yes it's the little blue clamp, it's an 8mm, and it's the fourth line back from the front!

Quote:

go here
Fixing one cause of the tick-tick-tick in a 3rd gen

Fixing one cause of the tick-tick-tick in a 3rd gen

Quote:

its the one in the center of the picture

Try reading the Thread it's only 21 posts... all of these questions have been answered!

__________________
07 2500 Cummins Laramie 5.9 4x4: DiPricol Optix: EGT/Boost/Trans Temp, S&B cai, 4" MBRP pro series c/b, Smarty POD, Mag-Hytec DD t/p, more tranny upgrades to come...

***mfoster48612*** · 09-17-2009, 07:49 PM

I'm glad you guys like the thread, I started it because of all my problems and thought someone else might have the same problems. especially with the back order on these puppies. Glad to see you guys got your stuff tightened up also. That could of made a big problem, especially with how hot the exhaust gets in all.

__________________
2006 White, quad cab, auto, slt, TRX4, Smarty S-06 POD, edge juice w/attitude, AIRDOG 150, S&B cold air intake, Silencer Ring MIA, solid steel adj. track bar, upgraded tie-rod kit, bd steering box brace, 6in Mitre Cut Stacks, Transmission built by FLOOR IT DIESEL!!!!

2001 Grey, quad cab, auto

BC_03 · 09-17-2009, 07:57 PM

This site is awesome man id never thought of checking that. I went outside and sure enough I got about 3 turns on the #4. Thanks for the thread saved me a possible headache.

__________________
03 HO, Suncoast tranny,pillar gauges egt/tranny/turbo,Smarty 4.2,helper fuel pump,custom intake,3" BL,straight pipe 4",90 hp ddp nozzles

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

09-16-2009, 11:29 PM	#13 (permalink)
7mm Newbie Join Date: Apr 2009 Posts: 28 Thanks: 2 Thanked 1 Time in 1 Post 7mm's Truck Pics	This just happened to my friends 05. Hairline crack right at the neck as the fellow above just stated. Problem was we were right in the middle of the Dempster Hwy in Northern Canada. 750 kms of uninhabited tundra/dirt/mud road pulling trailers - one stop with a gas station and their tow truck was out of commision! Mobile CAT welder mechanic brazed it for us __________________ 2007 5.9, Auto, AFE Stage 1 Pro-Guard 7, BFG 285's, Smarty Jr - Edge Insight Monitor

Remove Advertisements Sponsored Links
Dodge Cummins Diesel Forum Advertisement

09-16-2009, 11:39 PM	#14 (permalink)
ashade07 Cummins Enthusiast Join Date: Feb 2007 Location: Boise, Id Posts: 285 Thanks: 3 Thanked 3 Times in 3 Posts ashade07's Truck Pics	Good heads up! I put a few clicks on mine (a little timid about overdoing it) rather easily. My rig has only got 23k on it! Checked all the others, they were tight. __________________ 07 2500 Cummins Laramie 5.9 4x4: DiPricol Optix: EGT/Boost/Trans Temp, S&B cai, 4" MBRP pro series c/b, Smarty POD, Mag-Hytec DD t/p, more tranny upgrades to come...

09-17-2009, 03:37 PM	#15 (permalink)
Mopar99360 Cummins Enthusiast Join Date: Jul 2008 Location: Taylorsville, KY Posts: 299 Thanks: 32 Thanked 9 Times in 8 Posts Mopar99360's Truck Pics	Can anyone take a picture for those of us who only know how to look at pictures? Thks __________________ 05 Blu QC 2500 4X4, Auto, XDI, Exht (Wifes Rig), *05 Wht QC 2500 4X4, 6 spd, S&B, Exht: (My Rig)*

09-17-2009, 03:55 PM	#18 (permalink)
torque monster Diesel Freak Join Date: Jun 2009 Location: Lakeland, FL Posts: 653 Thanks: 8 Thanked 26 Times in 19 Posts torque monster's Truck Pics	Should I worry about this in my 04-305hp, I think i hear a tick-tick-tick sometimes from underneath the hood? __________________ 2004 CR - A Few Bolt Ons

09-17-2009, 06:10 PM	#21 (permalink)
LeeWayne Diesel Freak Join Date: Apr 2009 Location: Waco,TX........weekends prolly Georgetown or Salado Posts: 662 Thanks: 22 Thanked 29 Times in 27 Posts LeeWayne's Truck Pics	ya I replaced mine as well i was sitting at idle at work one morning and smelt diesel popped the hood sure enough saw it leaking. My uncle works on diesel's for a living and he said it's the vibration from the motor that cracks the line. he had a guy replace all the lines in one of there trucks and then next day had to replace all of them again because the guy didn't put the line holders on and they all vibrated and cracked __________________ 06 5.9 3500 dually, longbed, singlecab, 6spd,

09-17-2009, 07:49 PM	#23 (permalink)
*mfoster48612* 06 Cummins Join Date: Feb 2009 Location: kansas Posts: 98 Thanks: 21 Thanked 29 Times in 6 Posts mfoster48612's Truck Pics	I'm glad you guys like the thread, I started it because of all my problems and thought someone else might have the same problems. especially with the back order on these puppies. Glad to see you guys got your stuff tightened up also. That could of made a big problem, especially with how hot the exhaust gets in all. __________________ 2006 White, quad cab, auto, slt, TRX4, Smarty S-06 POD, edge juice w/attitude, AIRDOG 150, S&B cold air intake, Silencer Ring MIA, solid steel adj. track bar, upgraded tie-rod kit, bd steering box brace, 6in Mitre Cut Stacks, Transmission built by FLOOR IT DIESEL!!!! 2001 Grey, quad cab, auto

09-17-2009, 07:57 PM	#24 (permalink)
BC_03 Cummins Fan Join Date: Sep 2009 Posts: 69 Thanks: 0 Thanked 1 Time in 1 Post BC_03's Truck Pics	This site is awesome man id never thought of checking that. I went outside and sure enough I got about 3 turns on the #4. Thanks for the thread saved me a possible headache. __________________ 03 HO, Suncoast tranny,pillar gauges egt/tranny/turbo,Smarty 4.2,helper fuel pump,custom intake,3" BL,straight pipe 4",90 hp ddp nozzles