$25 Airbox Mod

***BRT*** · 10-25-2006, 02:32 PM

Been busy this morning.
Did an airbox mod with stuff I oredered for 4" dust collection systems.

6" Jointer Hood $6
Clamp $1
10 ft hose $19 ( I only used 18")

These items can be purchased at a woodwrorking supply store or like Rockler.com.

The hose I used had the wire reinforcement in it. If it does wear out I got another 8.5 ft of it.

I did this in conjunction with a muffler delete and the throttle feels way lighter. Spools nice also.

__________________
2006 2wd DRW Auto Lone Star White Quad Cab, Smarty Jr.

, GDP Intake, GDP Grid Heater Delete Silencer Delete, MBRP 5" Catback, Isspro Boost,Pyro,TransTemp Pillar Gauges, Turbo Ring GONE, Kilby's Condenser Guard, AMSOil Drop In, Airbox modded, MBRP 6" Tip, Ipod, XM, 5 MPG Cupholder, BedRug, Ranchhand Brush Guard

Last edited by BRT : 12-23-2007 at 09:41 AM.

TrueValue Truck · 10-25-2006, 02:43 PM

looks good :thumbsup

__________________

Caldwellfire.com

06 3500 SRW MC ,Smarty REVO,X2 Race stack, Commander,CFM, Monster Air COI,AFE Torque tube,FASS 150 HPFP LP,Muffler delete,Tipple disc Converter and VB ,ProComp 2" leveling kit,Timbren's,Reese Class V Tow Beast

Ohio Coal Rollers

Cumminsforum.com

BBRam · 10-25-2006, 02:49 PM

That will work, Nice job.

__________________
03-3500, DRW, QC, 4x4, DTT Trans, Mag-Hytec, R700 BD Twins, BD IC Boots, BD Billet Flexplate, Lockup Switch, SMARTY TNT-R BETA/TS MP-8, Eliminator Fuel System, Floor It Stage 3 CP3 & Rail Cap, BIG Stix's by FTE, ARP Head Stud's, Springs, Fluidampr, ATS ARC-FLOW, AFE, Boost, Drive Pressure, Pyro, Fuel Pressure, Tran's Temp, Rail Pressure Gauge, GDP Ladder Bars, GrandRock 7" Miters. Old #'s (R/T .021, 60' 1.76, 1/4 ET 13.14 @ 100.45 mph)

BadMegacab · 10-25-2006, 03:01 PM

Nice job...

A buddy of mine did the same thing but took it a step further. He put a 90 on the end and ran it up behind his empty light hole on the bumper.

Lane

__________________

2006 Dodge 3500 Mega cab 4x4 CTD;
2" leveling kit, 295-70-17 Nitto Terra Grapplers, 4" turbo back (straight piped), BHAF intake

I Love the smell of diesel in the morning...it smells like victory!

trik396 · 10-25-2006, 03:46 PM

Very nice.... and your garage looks too darn clean...What's up with that?..

and BBram, if that's your garage in your garage (?) all I can say is WOW!

__________________
2005 DodgeRam2500 CTD/ 4x4/ BigHorn/ Autometer/AmsoilBypass/AemBruteforce
Trans by Goerend/ Walbro392custom fuel system/CAT2micfuelfilters/IISilver64/BanksIC
Projector HID's/DiablosportPredator/VanAaken3.2/QuadsXZT
617hp 1200+trq

KOREChasewFoxShox/Carli&FoxDualSteeringStabilizer/ NittoTerras285's
3 people can keep a secret if 2 of them are dead...

Last edited by trik396 : 10-25-2006 at 03:49 PM.

***BRT*** · 10-25-2006, 03:53 PM

I did think about the 90, but I have fogs so I didn't think it would do a lot more.
I am a neat freak in the garage, thanks for noticing.
My wife says its an obsession ,my buds say it's a sickness.
Fridge full of Bud, Satellite radio, gotta be comfy.

__________________
2006 2wd DRW Auto Lone Star White Quad Cab, Smarty Jr.

, GDP Intake, GDP Grid Heater Delete Silencer Delete, MBRP 5" Catback, Isspro Boost,Pyro,TransTemp Pillar Gauges, Turbo Ring GONE, Kilby's Condenser Guard, AMSOil Drop In, Airbox modded, MBRP 6" Tip, Ipod, XM, 5 MPG Cupholder, BedRug, Ranchhand Brush Guard

***Valley Automotive*** · 10-25-2006, 03:54 PM

I've seen them use the metal or plastic ends for dryer hose, so you don't have to screw a mounting point into the airbox, just cut a hole closely to the diameter of the dryer hose end, push the end through, it catches on its own rim/edge, and then secure a hose underneath. Maybe less work, who knows?

__________________
2006 Dodge Ram 3500 6-speed manual, sponsored by Truck Toys and N-Fab....

www.crankitupforthecure.com

***Valley Automotive*** · 10-25-2006, 03:55 PM

"Fridge full of Bud, Satellite radio, gotta be comfy."

Yes, clean garage...wish mine was - good job.

__________________
2006 Dodge Ram 3500 6-speed manual, sponsored by Truck Toys and N-Fab....

www.crankitupforthecure.com

Dr. Evil · 10-25-2006, 05:32 PM

tttttttttttttttttt

Last edited by Dr. Evil : 02-02-2008 at 08:51 PM.

10-25-2006, 02:32 PM	#1 (permalink)
*BRT* Yep Join Date: Jun 2006 Location: Santa Teresa, New Mexico Posts: 329 BRT's Truck Pics	$25 Airbox Mod Been busy this morning. Did an airbox mod with stuff I oredered for 4" dust collection systems. 6" Jointer Hood $6 Clamp $1 10 ft hose $19 ( I only used 18") These items can be purchased at a woodwrorking supply store or like Rockler.com. The hose I used had the wire reinforcement in it. If it does wear out I got another 8.5 ft of it. I did this in conjunction with a muffler delete and the throttle feels way lighter. Spools nice also. __________________ 2006 2wd DRW Auto Lone Star White Quad Cab, Smarty Jr., GDP Intake, GDP Grid Heater Delete Silencer Delete, MBRP 5" Catback, Isspro Boost,Pyro,TransTemp Pillar Gauges, Turbo Ring GONE, Kilby's Condenser Guard, AMSOil Drop In, Airbox modded, MBRP 6" Tip, Ipod, XM, 5 MPG Cupholder, BedRug, Ranchhand Brush Guard Last edited by BRT : 12-23-2007 at 09:41 AM.

10-25-2006, 03:53 PM	#6 (permalink)
*BRT* Yep Join Date: Jun 2006 Location: Santa Teresa, New Mexico Posts: 329 BRT's Truck Pics	I did think about the 90, but I have fogs so I didn't think it would do a lot more. I am a neat freak in the garage, thanks for noticing. My wife says its an obsession ,my buds say it's a sickness. Fridge full of Bud, Satellite radio, gotta be comfy. __________________ 2006 2wd DRW Auto Lone Star White Quad Cab, Smarty Jr., GDP Intake, GDP Grid Heater Delete Silencer Delete, MBRP 5" Catback, Isspro Boost,Pyro,TransTemp Pillar Gauges, Turbo Ring GONE, Kilby's Condenser Guard, AMSOil Drop In, Airbox modded, MBRP 6" Tip, Ipod, XM, 5 MPG Cupholder, BedRug, Ranchhand Brush Guard

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Remove Advertisements Sponsored Links
Dodge Cummins Diesel Forum Advertisement

10-25-2006, 02:43 PM	#2 (permalink)
TrueValue Truck Tech Specialist/Super Moderator Join Date: Dec 2005 Location: Caldwell,Ohio Posts: 3,556 TrueValue Truck's Truck Pics	looks good :thumbsup __________________ Caldwellfire.com 06 3500 SRW MC ,Smarty REVO,X2 Race stack, Commander,CFM, Monster Air COI,AFE Torque tube,FASS 150 HPFP LP,Muffler delete,Tipple disc Converter and VB ,ProComp 2" leveling kit,Timbren's,Reese Class V Tow Beast Ohio Coal Rollers *Cumminsforum.com*

10-25-2006, 02:49 PM	#3 (permalink)
BBRam Super Administrator Join Date: Jan 2006 Location: Chelsea MI Posts: 17,321 BBRam's Truck Pics	That will work, Nice job. __________________ 03-3500, DRW, QC, 4x4, DTT Trans, Mag-Hytec, R700 BD Twins, BD IC Boots, BD Billet Flexplate, Lockup Switch, SMARTY TNT-R BETA/TS MP-8, Eliminator Fuel System, Floor It Stage 3 CP3 & Rail Cap, BIG Stix's by FTE, ARP Head Stud's, Springs, Fluidampr, ATS ARC-FLOW, AFE, Boost, Drive Pressure, Pyro, Fuel Pressure, Tran's Temp, Rail Pressure Gauge, GDP Ladder Bars, GrandRock 7" Miters. Old #'s (R/T .021, 60' 1.76, 1/4 ET 13.14 @ 100.45 mph)

10-25-2006, 03:01 PM	#4 (permalink)
BadMegacab Newbie Join Date: Oct 2006 Location: Casper, Wyoming Posts: 2 BadMegacab's Truck Pics	Nice job... A buddy of mine did the same thing but took it a step further. He put a 90 on the end and ran it up behind his empty light hole on the bumper. Lane __________________ 2006 Dodge 3500 Mega cab 4x4 CTD; 2" leveling kit, 295-70-17 Nitto Terra Grapplers, 4" turbo back (straight piped), BHAF intake I Love the smell of diesel in the morning...it smells like victory!

10-25-2006, 03:46 PM	#5 (permalink)
trik396 Diesel Head Join Date: Jan 2006 Location: Illinois Posts: 1,386 trik396's Truck Pics	Very nice.... and your garage looks too darn clean...What's up with that?.. and BBram, if that's your garage in your garage (?) all I can say is WOW! __________________ 2005 DodgeRam2500 CTD/ 4x4/ BigHorn/ Autometer/AmsoilBypass/AemBruteforce Trans by Goerend/ Walbro392custom fuel system/CAT2micfuelfilters/IISilver64/BanksIC Projector HID's/DiablosportPredator/VanAaken3.2/QuadsXZT 617hp 1200+trq KOREChasewFoxShox/Carli&FoxDualSteeringStabilizer/ NittoTerras285's 3 people can keep a secret if 2 of them are dead... Last edited by trik396 : 10-25-2006 at 03:49 PM.

10-25-2006, 03:54 PM	#7 (permalink)
*Valley Automotive* Diesel Head Join Date: Sep 2006 Location: Collegeville, PA Posts: 503 Valley Automotive's Truck Pics	I've seen them use the metal or plastic ends for dryer hose, so you don't have to screw a mounting point into the airbox, just cut a hole closely to the diameter of the dryer hose end, push the end through, it catches on its own rim/edge, and then secure a hose underneath. Maybe less work, who knows? __________________ 2006 Dodge Ram 3500 6-speed manual, sponsored by Truck Toys and N-Fab.... www.crankitupforthecure.com

10-25-2006, 03:55 PM	#8 (permalink)
*Valley Automotive* Diesel Head Join Date: Sep 2006 Location: Collegeville, PA Posts: 503 Valley Automotive's Truck Pics	"Fridge full of Bud, Satellite radio, gotta be comfy." Yes, clean garage...wish mine was - good job. __________________ 2006 Dodge Ram 3500 6-speed manual, sponsored by Truck Toys and N-Fab.... www.crankitupforthecure.com

10-25-2006, 05:32 PM	#9 (permalink)
Dr. Evil Banned Join Date: Jan 2006 Posts: 2,565 Dr. Evil's Truck Pics	tttttttttttttttttt Last edited by Dr. Evil : 02-02-2008 at 08:51 PM.