Bully Dog PMT ?

buggz · 11-12-2008, 08:51 AM

This connects to ONLY the OBD-II connector, and one power lead, correct?
It reads EGT temps w/o a probe?
This sounds great if true.
I'm guessing this is a calculated value, and you find the baseline values for certain conditions, and make set points from there.
This would be great, as I have extended warranty, and do not wish to drill into the manifold.

__________________
2006 Ram 2500 SLT Mega cab, 4x4, HO 5.9L Cummins, 48RE, stock

buggz · 11-12-2008, 09:32 AM

Hmm, I'm seeing the manual that it DOES have EGT probes.
However, this review says they did NOT use probes.
BULLY DOG PMT Review - Trucks 4x4 @ Off-Road.com
Either, or?
I'm confused, sorry...

__________________
2006 Ram 2500 SLT Mega cab, 4x4, HO 5.9L Cummins, 48RE, stock

Last edited by buggz : 11-12-2008 at 09:57 AM.

buggz · 11-12-2008, 12:01 PM

"The probe is not required on a 6.7L because it has probes already installed from the factory. The 5.9L motor still requires a probe."

Oh.

__________________
2006 Ram 2500 SLT Mega cab, 4x4, HO 5.9L Cummins, 48RE, stock

rossk · 11-12-2008, 12:29 PM

I have a 5.9 and u have to tap the manifold or dwnpipe manifold is more accurate

11-12-2008, 08:51 AM	#1 (permalink)
buggz Cummins Fan Join Date: Oct 2008 Location: Riverdale, GA Posts: 53 buggz's Truck Pics	Bully Dog PMT ? This connects to ONLY the OBD-II connector, and one power lead, correct? It reads EGT temps w/o a probe? This sounds great if true. I'm guessing this is a calculated value, and you find the baseline values for certain conditions, and make set points from there. This would be great, as I have extended warranty, and do not wish to drill into the manifold. __________________ 2006 Ram 2500 SLT Mega cab, 4x4, HO 5.9L Cummins, 48RE, stock

11-12-2008, 09:32 AM	#2 (permalink)
buggz Cummins Fan Join Date: Oct 2008 Location: Riverdale, GA Posts: 53 buggz's Truck Pics	Bully Dog PMT ? Hmm, I'm seeing the manual that it DOES have EGT probes. However, this review says they did NOT use probes. BULLY DOG PMT Review - Trucks 4x4 @ Off-Road.com Either, or? I'm confused, sorry... __________________ 2006 Ram 2500 SLT Mega cab, 4x4, HO 5.9L Cummins, 48RE, stock Last edited by buggz : 11-12-2008 at 09:57 AM.

11-12-2008, 12:01 PM	#3 (permalink)
buggz Cummins Fan Join Date: Oct 2008 Location: Riverdale, GA Posts: 53 buggz's Truck Pics	Bully Dog PMT ? "The probe is not required on a 6.7L because it has probes already installed from the factory. The 5.9L motor still requires a probe." Oh. __________________ 2006 Ram 2500 SLT Mega cab, 4x4, HO 5.9L Cummins, 48RE, stock

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Remove Advertisements Sponsored Links
Dodge Cummins Diesel Forum Advertisement

11-12-2008, 12:29 PM	#4 (permalink)
rossk Newbie Join Date: Aug 2007 Posts: 28 rossk's Truck Pics	I have a 5.9 and u have to tap the manifold or dwnpipe manifold is more accurate