Commander Rail Press feature

SteveinAK · 10-19-2006, 10:53 PM

Is the Rail Pressure only available if the truck is equipped with a Quad Box? I was reading the Commander Fuel Press install info Quad e-mailed me, and for rail press it says to tap a wire on the Xillaraider. What if I don't have a box, I'll just using the Commander as a stand-alone gauge for the time being?

I am getting anxious for this weekend to do the Commander install. Missed the UPS man today, so I'll have to wait til tomorow for the Pillar mount. But the UPS man left a "Attempted delivery" note, so I know it's here!

__________________
-Steve 2003 SO CTD 3500 SLT QC SRW 4x4, NV4500 5-speed w/ Fast Coolers, Donaldson muffler, Commander w/ Xzillaraider, S&B Intake, Kore leveling, BD E-Brake, Hellwig Sway-Bar, ATS Arc-Flow, ATS exhaust manifold, HE351 turbo and Glacier GFS-392.

carcrz · 10-20-2006, 07:27 AM

I mentioned this in another thread (I can't remember if it were here or on TDR) & got bashed for asking. Hope you get better luck that I did. I think I remember Quad saying that you tap the green wire on the rail pressure. I haven't messed w/ it yet though. There is actually two wires that aren't in the directions for a stock truck - that rail pressure one & a brown one. The brown one is an extra that will be used for future updates by Quad.

__________________
2005 DODGE RAM 2500 - Quad Cab - 4x4 - Lonestar Package - Chrome Handle Covers - Carbon Fiber Interior - Katzkin black/taupe Leather Seats - n-fab side steps - PML Tranny pan & Diff. Covers - FS2500 Bypass Filter - Quad Commander - Quad Race Module - Nanofiber Air Filter - Air Horns & Strobes on the shelf - & now a carseat! VOTE FOR THIS MONTH'S ROTM!

SteveinAK · 10-20-2006, 10:21 AM

Why would you get bashed for asking that? Well, hopefully that doesn't happen to you in the future. Most folks around here are extremely helpful.

__________________
-Steve 2003 SO CTD 3500 SLT QC SRW 4x4, NV4500 5-speed w/ Fast Coolers, Donaldson muffler, Commander w/ Xzillaraider, S&B Intake, Kore leveling, BD E-Brake, Hellwig Sway-Bar, ATS Arc-Flow, ATS exhaust manifold, HE351 turbo and Glacier GFS-392.

SteveinAK · 10-20-2006, 04:52 PM

Nobody has the Quad Commander running as a stand alone?

__________________
-Steve 2003 SO CTD 3500 SLT QC SRW 4x4, NV4500 5-speed w/ Fast Coolers, Donaldson muffler, Commander w/ Xzillaraider, S&B Intake, Kore leveling, BD E-Brake, Hellwig Sway-Bar, ATS Arc-Flow, ATS exhaust manifold, HE351 turbo and Glacier GFS-392.

Dodgezilla · 10-20-2006, 05:57 PM

What a STOOPID question. I CAN'T BELIEVE YOU ARE ASKING IT! DON'T YOU KNOW ANYTHING? GO BACK TO DRIVING A GASSER!!!!!

__________________
SOLD!!! 08 Ram 2500 Mega 4x4,68RE,6.7,Loaded Laramie,SRT10 hood,Sunroof,DVD,Nitto 285s,Polished Alloys,Fogzilla,Rear Spoiler,MOPAR Grill Guard,H&S StageII,AFE Drop-In
Looking for my next truck. Do you have it?

Dodgezilla · 10-20-2006, 05:58 PM

JK of course. I'm interested in the answer myself as I may go back to running just a Quad box soon...

__________________
SOLD!!! 08 Ram 2500 Mega 4x4,68RE,6.7,Loaded Laramie,SRT10 hood,Sunroof,DVD,Nitto 285s,Polished Alloys,Fogzilla,Rear Spoiler,MOPAR Grill Guard,H&S StageII,AFE Drop-In
Looking for my next truck. Do you have it?

SteveinAK · 10-20-2006, 06:59 PM

:THREAT:

I know, I know! Stupid question! I got an answer over at DTR. Yelloz28 over there says tap the middle wire on the rail sensor. On my truck, the middle wire is pink. At least, that is, if I was actually looking at the rail sensor! It's gotta be, it's the only sensor I see actually on the rail itself...
Somebody please correct me if I'm wrong!

__________________
-Steve 2003 SO CTD 3500 SLT QC SRW 4x4, NV4500 5-speed w/ Fast Coolers, Donaldson muffler, Commander w/ Xzillaraider, S&B Intake, Kore leveling, BD E-Brake, Hellwig Sway-Bar, ATS Arc-Flow, ATS exhaust manifold, HE351 turbo and Glacier GFS-392.

carcrz · 10-20-2006, 07:06 PM

I asked it in the "urgent" section because I was doing the install right then & wanted a fast response. For some reason, they felt the need to get all worked up instead of just giving some assistance. I gave up trying to get that wire hooked up. I'm glad to see you have had better results than I did. Now, to go hook that wire up to the middle one. Thanks!!!

__________________
2005 DODGE RAM 2500 - Quad Cab - 4x4 - Lonestar Package - Chrome Handle Covers - Carbon Fiber Interior - Katzkin black/taupe Leather Seats - n-fab side steps - PML Tranny pan & Diff. Covers - FS2500 Bypass Filter - Quad Commander - Quad Race Module - Nanofiber Air Filter - Air Horns & Strobes on the shelf - & now a carseat! VOTE FOR THIS MONTH'S ROTM!

SteveinAK · 10-20-2006, 07:08 PM

No problem.:thumbsup

__________________
-Steve 2003 SO CTD 3500 SLT QC SRW 4x4, NV4500 5-speed w/ Fast Coolers, Donaldson muffler, Commander w/ Xzillaraider, S&B Intake, Kore leveling, BD E-Brake, Hellwig Sway-Bar, ATS Arc-Flow, ATS exhaust manifold, HE351 turbo and Glacier GFS-392.

**Qzilla** · 10-21-2006, 10:00 PM

Just tap the middle wire on the rail sensor and you are good to go.

The only things the Commander cannot do in stand alone mode is de-fuel and cold engine protection as we do not monkey with the truck to make it run worse than stock.

Everything else will work and it sounds like we need to fix that in the instructions. I am sure they are like that so people get the correct wire when a module is installed.

So no matter what module or anything else as long as you connect to the middle wire on the plug that is going into the factory sensor you will be in business!

Quad

SteveinAK · 10-21-2006, 10:41 PM

Thanks Quad! By the way, it is installed and works great! So far, I'm impressed! I just hope I don't wreck the truck, cause going down the road I catch myself watching the Commander instead of whats ahead!

__________________
-Steve 2003 SO CTD 3500 SLT QC SRW 4x4, NV4500 5-speed w/ Fast Coolers, Donaldson muffler, Commander w/ Xzillaraider, S&B Intake, Kore leveling, BD E-Brake, Hellwig Sway-Bar, ATS Arc-Flow, ATS exhaust manifold, HE351 turbo and Glacier GFS-392.

10-19-2006, 10:53 PM	#1 (permalink)
SteveinAK Cummins Enthusiast Join Date: Jul 2006 Location: Mountain Home, Idaho Posts: 229 SteveinAK's Truck Pics	Commander Rail Press feature Is the Rail Pressure only available if the truck is equipped with a Quad Box? I was reading the Commander Fuel Press install info Quad e-mailed me, and for rail press it says to tap a wire on the Xillaraider. What if I don't have a box, I'll just using the Commander as a stand-alone gauge for the time being? I am getting anxious for this weekend to do the Commander install. Missed the UPS man today, so I'll have to wait til tomorow for the Pillar mount. But the UPS man left a "Attempted delivery" note, so I know it's here! __________________ -Steve 2003 SO CTD 3500 SLT QC SRW 4x4, NV4500 5-speed w/ Fast Coolers, Donaldson muffler, Commander w/ Xzillaraider, S&B Intake, Kore leveling, BD E-Brake, Hellwig Sway-Bar, ATS Arc-Flow, ATS exhaust manifold, HE351 turbo and Glacier GFS-392.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Remove Advertisements Sponsored Links
Dodge Cummins Diesel Forum Advertisement

10-20-2006, 07:27 AM	#2 (permalink)
carcrz Cummins in KC Join Date: Jun 2006 Location: Belton, Missouri Posts: 652 carcrz's Truck Pics	I mentioned this in another thread (I can't remember if it were here or on TDR) & got bashed for asking. Hope you get better luck that I did. I think I remember Quad saying that you tap the green wire on the rail pressure. I haven't messed w/ it yet though. There is actually two wires that aren't in the directions for a stock truck - that rail pressure one & a brown one. The brown one is an extra that will be used for future updates by Quad. __________________ 2005 DODGE RAM 2500 - Quad Cab - 4x4 - Lonestar Package - Chrome Handle Covers - Carbon Fiber Interior - Katzkin black/taupe Leather Seats - n-fab side steps - PML Tranny pan & Diff. Covers - FS2500 Bypass Filter - Quad Commander - Quad Race Module - Nanofiber Air Filter - Air Horns & Strobes on the shelf - & now a carseat! VOTE FOR THIS MONTH'S ROTM!

10-20-2006, 10:21 AM	#3 (permalink)
SteveinAK Cummins Enthusiast Join Date: Jul 2006 Location: Mountain Home, Idaho Posts: 229 SteveinAK's Truck Pics	Why would you get bashed for asking that? Well, hopefully that doesn't happen to you in the future. Most folks around here are extremely helpful. __________________ -Steve 2003 SO CTD 3500 SLT QC SRW 4x4, NV4500 5-speed w/ Fast Coolers, Donaldson muffler, Commander w/ Xzillaraider, S&B Intake, Kore leveling, BD E-Brake, Hellwig Sway-Bar, ATS Arc-Flow, ATS exhaust manifold, HE351 turbo and Glacier GFS-392.

10-20-2006, 04:52 PM	#4 (permalink)
SteveinAK Cummins Enthusiast Join Date: Jul 2006 Location: Mountain Home, Idaho Posts: 229 SteveinAK's Truck Pics	Nobody has the Quad Commander running as a stand alone? __________________ -Steve 2003 SO CTD 3500 SLT QC SRW 4x4, NV4500 5-speed w/ Fast Coolers, Donaldson muffler, Commander w/ Xzillaraider, S&B Intake, Kore leveling, BD E-Brake, Hellwig Sway-Bar, ATS Arc-Flow, ATS exhaust manifold, HE351 turbo and Glacier GFS-392.

10-20-2006, 05:57 PM	#5 (permalink)
Dodgezilla Diesel Head Join Date: Dec 2005 Location: East Coast Posts: 2,458 Dodgezilla's Truck Pics	What a STOOPID question. I CAN'T BELIEVE YOU ARE ASKING IT! DON'T YOU KNOW ANYTHING? GO BACK TO DRIVING A GASSER!!!!! __________________ SOLD!!! 08 Ram 2500 Mega 4x4,68RE,6.7,Loaded Laramie,SRT10 hood,Sunroof,DVD,Nitto 285s,Polished Alloys,Fogzilla,Rear Spoiler,MOPAR Grill Guard,H&S StageII,AFE Drop-In Looking for my next truck. Do you have it?

10-20-2006, 05:58 PM	#6 (permalink)
Dodgezilla Diesel Head Join Date: Dec 2005 Location: East Coast Posts: 2,458 Dodgezilla's Truck Pics	JK of course. I'm interested in the answer myself as I may go back to running just a Quad box soon... __________________ SOLD!!! 08 Ram 2500 Mega 4x4,68RE,6.7,Loaded Laramie,SRT10 hood,Sunroof,DVD,Nitto 285s,Polished Alloys,Fogzilla,Rear Spoiler,MOPAR Grill Guard,H&S StageII,AFE Drop-In Looking for my next truck. Do you have it?

10-20-2006, 06:59 PM	#7 (permalink)
SteveinAK Cummins Enthusiast Join Date: Jul 2006 Location: Mountain Home, Idaho Posts: 229 SteveinAK's Truck Pics	:THREAT: I know, I know! Stupid question! I got an answer over at DTR. Yelloz28 over there says tap the middle wire on the rail sensor. On my truck, the middle wire is pink. At least, that is, if I was actually looking at the rail sensor! It's gotta be, it's the only sensor I see actually on the rail itself... Somebody please correct me if I'm wrong! __________________ -Steve 2003 SO CTD 3500 SLT QC SRW 4x4, NV4500 5-speed w/ Fast Coolers, Donaldson muffler, Commander w/ Xzillaraider, S&B Intake, Kore leveling, BD E-Brake, Hellwig Sway-Bar, ATS Arc-Flow, ATS exhaust manifold, HE351 turbo and Glacier GFS-392.

10-20-2006, 07:06 PM	#8 (permalink)
carcrz Cummins in KC Join Date: Jun 2006 Location: Belton, Missouri Posts: 652 carcrz's Truck Pics	I asked it in the "urgent" section because I was doing the install right then & wanted a fast response. For some reason, they felt the need to get all worked up instead of just giving some assistance. I gave up trying to get that wire hooked up. I'm glad to see you have had better results than I did. Now, to go hook that wire up to the middle one. Thanks!!! __________________ 2005 DODGE RAM 2500 - Quad Cab - 4x4 - Lonestar Package - Chrome Handle Covers - Carbon Fiber Interior - Katzkin black/taupe Leather Seats - n-fab side steps - PML Tranny pan & Diff. Covers - FS2500 Bypass Filter - Quad Commander - Quad Race Module - Nanofiber Air Filter - Air Horns & Strobes on the shelf - & now a carseat! VOTE FOR THIS MONTH'S ROTM!

10-20-2006, 07:08 PM	#9 (permalink)
SteveinAK Cummins Enthusiast Join Date: Jul 2006 Location: Mountain Home, Idaho Posts: 229 SteveinAK's Truck Pics	No problem.:thumbsup __________________ -Steve 2003 SO CTD 3500 SLT QC SRW 4x4, NV4500 5-speed w/ Fast Coolers, Donaldson muffler, Commander w/ Xzillaraider, S&B Intake, Kore leveling, BD E-Brake, Hellwig Sway-Bar, ATS Arc-Flow, ATS exhaust manifold, HE351 turbo and Glacier GFS-392.

10-21-2006, 10:00 PM	#10 (permalink)
Qzilla Quadzilla Performance Technologies, Inc. Join Date: May 2006 Posts: 544 Qzilla's Truck Pics	Just tap the middle wire on the rail sensor and you are good to go. The only things the Commander cannot do in stand alone mode is de-fuel and cold engine protection as we do not monkey with the truck to make it run worse than stock. Everything else will work and it sounds like we need to fix that in the instructions. I am sure they are like that so people get the correct wire when a module is installed. So no matter what module or anything else as long as you connect to the middle wire on the plug that is going into the factory sensor you will be in business! Quad

10-21-2006, 10:41 PM	#11 (permalink)
SteveinAK Cummins Enthusiast Join Date: Jul 2006 Location: Mountain Home, Idaho Posts: 229 SteveinAK's Truck Pics	Thanks Quad! By the way, it is installed and works great! So far, I'm impressed! I just hope I don't wreck the truck, cause going down the road I catch myself watching the Commander instead of whats ahead! __________________ -Steve 2003 SO CTD 3500 SLT QC SRW 4x4, NV4500 5-speed w/ Fast Coolers, Donaldson muffler, Commander w/ Xzillaraider, S&B Intake, Kore leveling, BD E-Brake, Hellwig Sway-Bar, ATS Arc-Flow, ATS exhaust manifold, HE351 turbo and Glacier GFS-392.