Dragonslayer CP3 - Page 5

DSTIMMELL · 10-26-2008, 09:04 AM

I HAVE THE DRAGONSLAYER CP3 AND LOVE IT.... WENT TO THE DYNO DID THREE PULLS ON STOCK PUMP WITH NO CHANGES... CHANGED OUT ONLY CP3 AND MADE 50 HP.... TALKED TO SHANE AT WICKED DIESELS AND HE TOLD ME WHAT I WOULD GAIN AND EVEN GUARANTEED IT... HAVE TALKED TO SHANE ON THE PHONE ON NUMEROUS OCCASIONS AND HE HAS ALWAYS BEEN HELPFUL AND TO THE POINT.... EXCELLENT CUSTOMER SERVICE... WOULD HIGHLY RECOMMEND HIS PRODUCTS.... ALWAYS A+ SERVICE.... THANKS AGAIN SHANE. WILL BE DOING BUSINESS WITH YOU AGAIN SOON...

thumbsup

joelc79 · 10-27-2008, 06:45 PM

Well I tried to get him to give me a price through a PM last week.. havn't heard a thing. I know people are busy, but he has posted half a dozen reply s on this thread since. I'm still interested Shane!

***Smoker03*** · 10-27-2008, 06:55 PM

Pick up the phone and give him a buzz. The price is also on his website.

**JacktheBear3** · 10-27-2008, 08:06 PM

Dude, he is not a sponsor here, so your request is not as easy as it seems... Give the guy time to check his messages, or take the advice above.

Floor It pumps are in stock in Streetsboro, but you don't see value in dealing local.

call the man, he will sell you a pump...

joelc79 · 10-31-2008, 08:22 PM

In stock? So if we have a set time i won't have my truck down longer than a day? For some reason you always give me a hard time when i'm looking for the best deals. I have explained before that i live in Brimfield but i travel all the time. Local isn't always local. I'll be out west for another week or two(with my truck). I have no prob with your shop, i just am very very busy. If you want to sell me a Floor It stage III then send me a PM, installed. I will even give you a deposit to promise you the work. I was on floor it site and checked into their pumps. deals up to you. maybe you will quit giving me $hit on every thread i post or reply too! I buy based on all kinds of things including convienence.

metal_miner · 10-31-2008, 11:03 PM

Quote:

Originally Posted by DIESEL POWER

do a search on TDR, here, and comp---you will find much info as to how and who helped the start of the CR revolution, i have been at the forefront of this since day one.

I went on TDR to find your first post and saw that you joined on 1/3/2006. So on 1/6/2006 you posted this in regards to EGT:

whats the highest you should run a 3rd gen before problems occur

the highest egts - TDR Roundtable

Also, on 1/3/2006 when asked about highest CR boost numbers you replied:

on my 04' i got a high of 31psi on level 3 with juice and the banks wastgate, thats with a bad lift pump

Boost #'s on HPCR engines - Page 2 - TDR Roundtable

Wow... Juice and Banks wastegate!

Quite the revolution you started!

After buying my truck in February 2003 I was sure glad to come across your posts because it really made me understand my truck. Because of your insightful boost and EGT observations, I did worry about the 47 psi and 1200* EGT I was getting out of the SPS62 I was running and it really made me change my driving habits.

Thank you!

Dockboy · 10-31-2008, 11:33 PM

Quote:

Originally Posted by DIESEL POWER

I feel am steadfast, and unmovable in my ways. i belive in what i do and support what most dont. I Dont conform to groups or personalities. I support what is right(thats why im republican), in other words i dont follow the crowd/majority.

"if you stand for nothing, you will fall for anything"

do a search on TDR, here, and comp---you will find much info as to how and who helped the start of the CR revolution, i have been at the forefront of this since day one. Turbo's injectors, modded cp3's, electronics, and even nitrous systems have been my involvment to better the diesel market, i dont often remind anyone except those who were not around when this was taking place, basically you are at the tail end of a 5 year old issue, the biggist problem i had on the forums was that i tryed to advertise with out paying for it, that got me banned several times, then of course you have a group of guys that seem to be jealous of the fact that i have helped design and test products they use today on there trucks. then to make things worse i beat them up with results in the 1/4 mile---and folks still cant agree with whats been done here. in the last year i have since backed away from any cummins design or testing products, and things have calmed down a bit, except for the occasonal heated debait......

it seems that even a simple post starts a fight anymore,even when it's good infomation, like i said it's members of a small group that usally start it.

on the other hand anyone that has or does deal and buy from me knows that products and service are #1. thats why you will never see a disgruntled customer on these or any forums complaining about NGM.

That has got to be one of the most halarious posts I've seen from you yet Wade!!!

Name ONE product you "designed" or even "helped design"