stack install help.

[tatkins85]

ok i got everything run and im to the part where i cut the hole in my bed. when i looked under the bed i noticed where i wanted to cut the hole so the stack would lean right up next to the back of the bed there is that bump down part where it holds the bed down to the frame? can i cut threw that or do i have to move the stack out? i hope not that would look stupid i want the stack to be flush with the backl of the bed.

__________________
06 quad cab cummins, Manifold's, Air Intake, Big Turbo, big nozzles, Big cp3, Single Stack, Smarty, Nitrous, Gauges, Studs, Springs, Big Fass, Built Trans.

[BigB82789]

The bed support rail needs to be cut.

__________________

'01 24V Fuel By F1 Diesel,Quadzilla, & Smarty, Air by HTT, Tranny by RDP/FTE
RDP Diesel, FTEDiesel

[JacktheBear3]

Chop, Chop the bed support rail, it's the only way to get the stacks where you need them.

Also, have a small hole saw available so that you can drill up from the bottom into that same support so you can get at both nuts for the U-Bolt type clamps

__________________

2002 24V, 2500 Quad Cab, Dark Silver, We Bit O Lift, Plain Jane, Comp (drag), BDRAD, Smarty Stack, F1 Mach 7.?, The Girlz are T61 & S400, PDR Stg III Head w/Rings top & bottom, HTS/FTE FULL billet Auto, SS Single Converter, Optix Gauges ( all high #'s), Detroit Locker, Custom 6" Miters, and plenty O junk in the Trunk...

[tatkins85]

thanks guys. im all done ill post some pictures up tommarow. the hole kit 5 inch turbo back 6 inch black stack cost me about 175$

__________________
06 quad cab cummins, Manifold's, Air Intake, Big Turbo, big nozzles, Big cp3, Single Stack, Smarty, Nitrous, Gauges, Studs, Springs, Big Fass, Built Trans.

[Luvnacummins]

shaweeeet!!! pic's please

__________________
06 Mega, MPI Twin Turbos, OPIE Ultimate Tranny, ARP studs, Hamilton Springs, DDP 110 Sticks, MP-8, Smarty TNT R, Stage II cp3, 20" rockstars on 35" toyo mt's Alien Patrol Bumpers.Mag-Hytec pans, airdog 150

[tatkins85]

the hole thing cost me $180 i went from a straight 4 inch pipe to a turbo back 5 inch to the 6 inch stack.

__________________
06 quad cab cummins, Manifold's, Air Intake, Big Turbo, big nozzles, Big cp3, Single Stack, Smarty, Nitrous, Gauges, Studs, Springs, Big Fass, Built Trans.

[Luvnacummins]

wow looks really good.. I like how you cut through the tool box!!

__________________
06 Mega, MPI Twin Turbos, OPIE Ultimate Tranny, ARP studs, Hamilton Springs, DDP 110 Sticks, MP-8, Smarty TNT R, Stage II cp3, 20" rockstars on 35" toyo mt's Alien Patrol Bumpers.Mag-Hytec pans, airdog 150

[rickjames]

Originally Posted by Luvnacummins

wow looks really good.. I like how you cut through the tool box!!

-mike

__________________
1999 dodge ram 3500 120,900 4x4,qc,lb,tw,auto,drop in and spray in bedliners,leather and woodgrain, heated pwr mirrors,pw,pl,p/drivers seat, overhead disp.,stereo cntrls on steering wheel,cd plr, bone stock except for a str8 pipe. FOR SALE!!!!! 11,800

[fxwannabe]

Where did you get that kit from or did you piece it together?

__________________
04.5 2500 4wd, 6 speed, 3.73 gears Mods: 4" Superlift, 35" DC Mud Country's, Bilstein 5150 rear shocks, Silencer MIA, Thuren track bar, diPricol boost, egt, and fuel pressure gauges

[03 ctd]

looks great, thats exactly what i want to do except flat black. where did you get the kit?

__________________
2003 quad cab 4x4 / 4inch strait pipe / volant cold air with "custom" air scoop / banks hi-ram / banks big head wastegate / pyro/boost/trans pillar / Smoke Switch / Smarty / stock tranny for now / 7" of lift and 35s

[tatkins85]

made it. and peiced it together

__________________
06 quad cab cummins, Manifold's, Air Intake, Big Turbo, big nozzles, Big cp3, Single Stack, Smarty, Nitrous, Gauges, Studs, Springs, Big Fass, Built Trans.