am I ready for extruded tips??

[modified03]

I just put on my arsen kit and was wondering if I could handle extruded tips now or is there some other thing I need to do before tips? I don't plan on doing a turbo for awhile

__________________
2003, smarty/tst stack, arsen II kit, muffler delete, amsoil 4510, isspro 3 pillar gauge set, 17 moto wheels on 315 tires, carter pusher pump, 2in leveling kit, tinted windows, westin nerb bars.

[rufushusky]

Common Rail injectors can support a good amount of power. I would put the money towards a turbo or transmission upgrades..

__________________
Dennis
04.5 Ram 2500 Reg Cab 4x4 5.9, 48re, AEM, Smarty, TS Ramifier, Banks High Ram,FASS HPFP, Boost/pyro/trans/FP/RP gauges, 5" Exhaust, Cat 2 micron fuel filter, Amsoil Bypass

[modified03]

so I really wouldn't gain anything but extruding my tips?

__________________
2003, smarty/tst stack, arsen II kit, muffler delete, amsoil 4510, isspro 3 pillar gauge set, 17 moto wheels on 315 tires, carter pusher pump, 2in leveling kit, tinted windows, westin nerb bars.

[rufushusky]

Originally Posted by modified03

so I really wouldn't gain anything but extruding my tips?

No I think you would gain power from them but you would also get a lot of heat to boot. I think the most effective mods for you would be turbo or trans mods.

__________________
Dennis
04.5 Ram 2500 Reg Cab 4x4 5.9, 48re, AEM, Smarty, TS Ramifier, Banks High Ram,FASS HPFP, Boost/pyro/trans/FP/RP gauges, 5" Exhaust, Cat 2 micron fuel filter, Amsoil Bypass

[modified03]

my clutch is doin good and i'v got the money for a new clutch just want to burn mine up what kind of turbo should I look for

__________________
2003, smarty/tst stack, arsen II kit, muffler delete, amsoil 4510, isspro 3 pillar gauge set, 17 moto wheels on 315 tires, carter pusher pump, 2in leveling kit, tinted windows, westin nerb bars.

[rufushusky]

Originally Posted by modified03

my clutch is doin good and i'v got the money for a new clutch just want to burn mine up what kind of turbo should I look for

I would think something in the 62mm range. Most of them are S300 based.

__________________
Dennis
04.5 Ram 2500 Reg Cab 4x4 5.9, 48re, AEM, Smarty, TS Ramifier, Banks High Ram,FASS HPFP, Boost/pyro/trans/FP/RP gauges, 5" Exhaust, Cat 2 micron fuel filter, Amsoil Bypass

[modified03]

that's a lot of money is a turbo what I would benifit the most from?

__________________
2003, smarty/tst stack, arsen II kit, muffler delete, amsoil 4510, isspro 3 pillar gauge set, 17 moto wheels on 315 tires, carter pusher pump, 2in leveling kit, tinted windows, westin nerb bars.

[Racing4funn]

I did DDP 50 hp tips and LOVE them. I was going to stay with the stock turbo and thats why I did the 50s but now I have 90s on the way and going with a 62 or 64 turbo. Idles smoother and runs out harder. I would say they are good for a solid 50 hp. If you went with 90hp tips you would want to keep the programing low because there will be to much fuel for the stock turbo. I think 50s are good for the stock turbos and larger ones.

__________________
2007 5.9 LWB Quad 4x4 Auto SLT
Bully Dog PMT, CFM+, 5" exhaust, Fass 95/150, Edge EZ, IceBox (Killer intake, get your money's worth ) DDP 90 sticks, MPI twins ordered

[modified03]

they guy told me to do like 35 percent which would be another 90hp to the ground he said

__________________
2003, smarty/tst stack, arsen II kit, muffler delete, amsoil 4510, isspro 3 pillar gauge set, 17 moto wheels on 315 tires, carter pusher pump, 2in leveling kit, tinted windows, westin nerb bars.

[Racing4funn]

Originally Posted by modified03

they guy told me to do like 35 percent which would be another 90hp to the ground he said

with 90s you might start to get into a lift pump issue. the 50s I talked about also improve mileage.. if you are staying with a stock turbo or a mild upgrade then stay stock on the injectors or get the 50s.

__________________
2007 5.9 LWB Quad 4x4 Auto SLT
Bully Dog PMT, CFM+, 5" exhaust, Fass 95/150, Edge EZ, IceBox (Killer intake, get your money's worth ) DDP 90 sticks, MPI twins ordered

[modified03]

the arsen kit and carter pusher pump wouldn't solve that prob? Sorry if this is a dumb question i'm still learning

__________________
2003, smarty/tst stack, arsen II kit, muffler delete, amsoil 4510, isspro 3 pillar gauge set, 17 moto wheels on 315 tires, carter pusher pump, 2in leveling kit, tinted windows, westin nerb bars.

---

Last edited by modified03 : 06-27-2008 at 09:13 AM.

[Racing4funn]

Originally Posted by modified03

the arsen kit and carter pusher pump wouldn't solve that prob? Sorry if this is a dumb question i'm still learning

didnt kno you had a pusher pump. yea your good to go

__________________
2007 5.9 LWB Quad 4x4 Auto SLT
Bully Dog PMT, CFM+, 5" exhaust, Fass 95/150, Edge EZ, IceBox (Killer intake, get your money's worth ) DDP 90 sticks, MPI twins ordered