cab light help

[rusty shackelferd]

i just bought a 06' dodge with cab lights. these light have moisture under the linses and i want to change them out. Q is - what do i expect when i am just changing them out without changing any wiring, and can i do all this all from outside the cab or do i have to take the headliner down. Do i have to change any wiring. just don't want to go into this blindly, thanks

[cummapartlover]

Originally Posted by rusty shackelferd

i just bought a 06' dodge with cab lights. these light have moisture under the linses and i want to change them out. Q is - what do i expect when i am just changing them out without changing any wiring, and can i do all this all from outside the cab or do i have to take the headliner down. Do i have to change any wiring. just don't want to go into this blindly, thanks

You can do everything on the outside of the cab. No need to pull the headliner. You may want to check the little white tabs that the bolts screw into and make sure they are good. If not it and they are stripped this can keep you from getting a good seal between the light and the cab and can cause moisture.

[meRockboost]

i ripped off my crap recon lights and went to the factory lights recently, just get some gasket maker and reseal the lights when you put them back on, also put a little on the screws too. And yes you can do this all from the outside.