Cummins Diesel Forum banner

Doors stopped unlocking when truck put into Park

639 views 1 reply 2 participants last post by  tryNto 
#1 · (Edited)
Doors stopped unlocking when I put the truck into Park.

Started happening the same time it's not mechanically going into park, as discussed here:
http://www.cumminsforum.com/forum/3...26-48re-no-park-help-where-these-2-parts.html

Dash indicates Park (P is circled), truck rolls if on hill, and no unlock.
Cable has been adjusted, linkaged and lever in correct positions, P-1 work as advertised.

What could cause the doors to not unlock? Replies to above thread all say the park feature in the transmission is strickly mechanical, not electrical, so it should affect the unlock feature. :banghead: :confused013:
 
#2 ·
It's a 2006, Have you tried unhooking both Batteries for 1/2 hour. Clean the Connectors and posts while waiting.

This corrects a lot of the Electrical issues with the 2006 Trucks.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top