Okay guys, I am in South Carolina. I have been talking to Tread, and we are putting together a dyno day in Anderson S.C. It's going to be right off of Clemson Blvd. All you need to do is take 85N to exit 19A. Go towards anderson. When you see the Ford dealership on the left, take a right.Then make another right onto Walker Drive. The shop is called Amazon Tuning Solutions. The lady I talked to said it was the building with all the yellow posts out front. If you will, if you're interested, send me a PM and let me know when you're available. I need to reserve a day in advance. BTW, the cost is $50.00 for 2 pulls.
__________________
South Carolina Chapter Co-President http://www.cumminsforum.com/forum/south-carolina/
1996 Dually 4x4, auto with BD valve body and torque-lok, banks twin ram, no plate, BHAF, Cummins exhaust brake
280.03 RWHP/682.93 TORQUE on David Dunbar's Dyno