Cummins Diesel Forum banner

New VP44 no start

1K views 4 replies 3 participants last post by  Cataract2 
#1 ·
Ok, just installed my new VP44. Went through the bleeding of injectors 3 and 4. Got fuel out of 4 and a small dribble from 3. Tried to start the truck and all I'm getting is it's cranking and starts to try to start but doesn't catch. I bled the injects again this time including 1, 2, 3, 4 and tried again. Same thing. It's trying to catch where it will fire just slightly but won't come to life. Anyone else dealt with this? How in the world do I get my truck to come back to life?
 
#3 ·
Sorry, forgot to put this in. I have a FASS system and gauges. FASS system is running and supplying fuel to the VP44. I get signs of fuel at the injectors. Wondering if I'm doing something wrong. How long do you need to crank it for it to start after bleeding?
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top