Quote:
Originally Posted by mulisha
you arent going to see that much at all of an egt drop, not from a intake elbow.an intercooler yes, water/meth yes,and the smarty runs cooler then most, that will help.
|
I agree with this.
Quote:
Originally Posted by 07white59
i got an 07 5.9l and s&b intake abd CMF+ intake man. smarty stacked with edge and i have never seen pass 1200* WOT.
|
I hope you run Smarty on nontiming levels?
Quote:
Originally Posted by mattingly
One like this might help with egt's......
 |
LOL that was hilarious!
Quote:
Originally Posted by rocket
You're right, eliminating head losses and increasing the pressure to the intake manifold won't lower egts  |
Actually he is right. You are actually DECREASING the pressure to the intake manifold when you go with an aftermarket intake. The narrow chanel in the stock elbow INCREASES THE VELOCITY of the air that is going into the manifold.
__________________
2004.5, 2500, Cummins 600, 4x4, SLT, QC, SB, 4.10's, 315's, Molten Red. 48RE by HTS
. BullyDog Crazy Larry + MP-8 stack, AFE PG7 and Blade Runner, Silverline and Magnaflow mufflers into 6" mitre, DiPricol pyro, boost, trans, fuel, and rail. Train Horns for
