Quote:
Originally Posted by CW6.7
Haha.... First you would need a plenty of fuel to feed them .... Oh and a tractor clutch to hold the 2000 ftlbs.
|
mmmmm, 2000ft lbs.
That's the kind of stuff I like to hear. Other than the fact that the rods would probably have to be swapped out, and the head would need to be fire ringed I'd say.
I'm sure some dual cp3s could provide the fuel along with some 200+hp injectors from II. Speaking of fuel, I know it's a bit off topic, is it possible to run bigger crossover tubes to the injectors and get a loping idle like with the 24v and vp44 pumps?
__________________
'07.5 3500 DRW G56 Silver, Shibby EGR/Cooler Delete and "Boost Tube", PMT, EPP, QZ Boost Fooler, Arson Jr., AD150w/DSV, SBC 3850 DD and 5"tb-8" stack thanks to Wally at FTE.