Dodge Cummins Diesel Forum - View Single Post - 37337 1-ton wheel cylinder install with pics!

Mikey-Mike · 04-11-2009, 01:07 PM

I am putting this on the list. I will be removing rims soon to polish them so it will be a good time to change out the wheel cylinders.

I had an 1987 Ford Bronco that the back brakes were always out of adjustment, found myself under the truck often re-adjusting them what a pain in the a$$..

Thanks for the reply..

__________________
Mikey

:
1994 Ram 2500 4wd Cummins TBD, Alcoa Rims, Motor Is All Stock @ 110,875 miles.. Tabbed KDP!!

04-11-2009, 01:07 PM	#8 (permalink)
Mikey-Mike Newbie Join Date: Jan 2009 Location: Northern New Jersey Posts: 19 Thanks: 0 Thanked 1 Time in 1 Post Mikey-Mike's Truck Pics	I am putting this on the list. I will be removing rims soon to polish them so it will be a good time to change out the wheel cylinders. I had an 1987 Ford Bronco that the back brakes were always out of adjustment, found myself under the truck often re-adjusting them what a pain in the a$$.. Thanks for the reply.. __________________ Mikey : 1994 Ram 2500 4wd Cummins TBD, Alcoa Rims, Motor Is All Stock @ 110,875 miles.. Tabbed KDP!!